The baud rate of the internal clock.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The baud rate of the internal clock.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pktSwchHdlcInternalClockS OBJECT-TYPE SYNTAX INTEGER { r2400bps (1), r4800bps (2), r9600bps (3), r14400bps(4), r19200bps(5), r38400bps(6), r48Kbps (7), r56Kbps (8), r64Kbps (9), r128Kbps (10), r256Kbps (11), r384Kbps (12), r504Kbps (13), r768Kbps (14), r1008Kbps(15), r1466Kbps(16), r2016Kbps(17), external(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The baud rate of the internal clock." ::= { pktSwchHdlcSEntry 15 }
pktSwchHdlcInternalClockS OBJECT-TYPE SYNTAX INTEGER { r2400bps (1), r4800bps (2), r9600bps (3), r14400bps(4), r19200bps(5), r38400bps(6), r48Kbps (7), r56Kbps (8), r64Kbps (9), r128Kbps (10), r256Kbps (11), r384Kbps (12), r504Kbps (13), r768Kbps (14), r1008Kbps(15), r1466Kbps(16), r2016Kbps(17), external(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "The baud rate of the internal clock." ::= { pktSwchHdlcSEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.5.1.1.1 | pktSwchHdlcLinkNumberS | 0 | 0 | The link number with which this entry is associated. This value corresponds to pktSwchPhyInterfaceNumber. There is an entry fo… |
1.3.6.1.4.1.164.8.5.1.1.2 | pktSwchHdlcDestAddrS | 0 | 0 | The destination address. It defines the X.25 address on the remote device. |
1.3.6.1.4.1.164.8.5.1.1.3 | pktSwchHdlcDestSubAddrS | 0 | 0 | The destination subaddress. It defines the synchronous link subaddress on the remote device. |
1.3.6.1.4.1.164.8.5.1.1.4 | pktSwchHdlcRedialTimeoutS | 0 | 0 | The time interval in seconds between two consecutive connect operations retries. |
1.3.6.1.4.1.164.8.5.1.1.5 | pktSwchHdlcRedialRetriesS | 0 | 0 | This defines how many times the call operation is repeated if the call request has failed. |
1.3.6.1.4.1.164.8.5.1.1.6 | pktSwchHdlcInactivityS | 0 | 0 | The amount of time in minutes of inactivity that will cause the session to disconnect. |
1.3.6.1.4.1.164.8.5.1.1.7 | pktSwchHdlcX25FacilitiesS | 0 | 0 | This specifies the X.25 facilities. The value is a sum of values (powers of two), where each value in the sum represents an opt… |
1.3.6.1.4.1.164.8.5.1.1.8 | pktSwchHdlcLocalSubaddr1S | 0 | 0 | The first local subaddress. |
1.3.6.1.4.1.164.8.5.1.1.9 | pktSwchHdlcLocalSubaddr2S | 0 | 0 | The secondary local subaddress. |
1.3.6.1.4.1.164.8.5.1.1.10 | pktSwchHdlcDestDlciS | 0 | 0 | The local DLCI which is used for HDLC encapsulation over Frame Relay. Range: 16...991 |
1.3.6.1.4.1.164.8.5.1.1.11 | pktSwchHdlcDestPortS | 0 | 0 | The local port that is used for HDLC encapsulation over Frame Relay. Range: 1...12 |
1.3.6.1.4.1.164.8.5.1.1.12 | pktSwchHdlcProtocolS | 0 | 0 | The HDLC protocol type. |
1.3.6.1.4.1.164.8.5.1.1.13 | pktSwchHdlcFlowContOptionsS | 0 | 0 | This specifies the type of flow control of the HDLC link. The value is a sum of values (powers of two), where each value in the… |
1.3.6.1.4.1.164.8.5.1.1.14 | pktSwchHdlcBufferFlowControlS | 0 | 0 | The number of buffers that will be allocated for the HDLC link. Default value is 10 |
1.3.6.1.4.1.164.8.5.1.1.16 | pktSwchHdlcNrzModeS | 0 | 0 | The data encoding format. The value is a sum of values (powers of two), where each value in the sum represents an option. The valu… |