The number of Rx excess rate violations in number of frames.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The number of Rx excess rate violations in number of frames.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: Counter32
Automatically extracted from www.mibdepot.com
pktSwchFrCircuitExcessRateViolRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Rx excess rate violations in number of frames." ::= { pktSwchFrCircuitAEntry 22 }
pktSwchFrCircuitExcessRateViolRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Rx excess rate violations in number of frames." ::= { pktSwchFrCircuitAEntry 22 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.8.6.1.1 | pktSwchFrCircuitIfIndexA | 0 | 0 | This is the ifIndex of the circuit, according to RFC 1573. |
1.3.6.1.4.1.164.8.8.6.1.2 | pktSwchFrCircuitIndexA | 0 | 0 | This Index is the DLCI of the circuit. |
1.3.6.1.4.1.164.8.8.6.1.3 | pktSwchFrCircuitDestProtA | 0 | 0 | The protocol encapsulation, if any, on this DLCI. The MPE protocol is a proprietary RAD protocol that enables a generic HDLC devi… |
1.3.6.1.4.1.164.8.8.6.1.4 | pktSwchFrCircuitDestIdA | 0 | 0 | If the DLCI destination protocol is none or async, this field has a value of an existing DLCI or async channel, respectively. Oth… |
1.3.6.1.4.1.164.8.8.6.1.5 | pktSwchFrCircuitBackIdA | 0 | 0 | The backup DLCI which is used when the current DLCI goes inactive. The destination protocol and destination id are the same as i… |
1.3.6.1.4.1.164.8.8.6.1.6 | pktSwchFrCircuitTxCirIntervalA | 0 | 0 | The Tx CIR interval in 1/10 seconds. |
1.3.6.1.4.1.164.8.8.6.1.7 | pktSwchFrCircuitTxCommittedA | 0 | 0 | The Tx committed rate in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.8 | pktSwchFrCircuitTxExcessA | 0 | 0 | The Tx excess in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.9 | pktSwchFrCircuitRxCirIntervalA | 0 | 0 | The Rx CIR interval in 1/10 seconds. |
1.3.6.1.4.1.164.8.8.6.1.10 | pktSwchFrCircuitRxCommittedA | 0 | 0 | The Rx committed rate in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.11 | pktSwchFrCircuitRxExcessA | 0 | 0 | The Rx excess in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.12 | pktSwchFrCircuitFunnelIdA | 0 | 0 | The funnel ID. |
1.3.6.1.4.1.164.8.8.6.1.13 | pktSwchFrCircuitFunnelStat | 0 | 0 | The funnel status. |
1.3.6.1.4.1.164.8.8.6.1.14 | pktSwchFrCircuitTxCongDiscards | 0 | 0 | The number of frames discarded because of Tx congestion. |
1.3.6.1.4.1.164.8.8.6.1.15 | pktSwchFrCircuitDeTxFrames | 0 | 0 | The number of DE Tx frames. |
1.3.6.1.4.1.164.8.8.6.1.16 | pktSwchFrCircuitDeRxFrames | 0 | 0 | The number of DE Rx frames. |
1.3.6.1.4.1.164.8.8.6.1.17 | pktSwchFrCircuitFecnTxFrames | 0 | 0 | The number of FECN Tx frames. |
1.3.6.1.4.1.164.8.8.6.1.18 | pktSwchFrCircuitBecnTxFrames | 0 | 0 | The number of BECN Tx frames. |
1.3.6.1.4.1.164.8.8.6.1.19 | pktSwchFrCircuitCommRateViolTxFrames | 0 | 0 | The number of Tx committed rate violations in number of frames. |
1.3.6.1.4.1.164.8.8.6.1.20 | pktSwchFrCircuitCommRateViolRxFrames | 0 | 0 | The number of Rx committed rate violations in number of frames. |
1.3.6.1.4.1.164.8.8.6.1.21 | pktSwchFrCircuitExcessRateViolTxFrames | 0 | 0 | The number of Tx excess rate violations in number of frames. |
1.3.6.1.4.1.164.8.8.6.1.23 | pktSwchFrCircuitState | 0 | 0 | Indicates whether the particular virtual cir- cuit is new or not. |
1.3.6.1.4.1.164.8.8.6.1.24 | pktSwchFrCircuitExtendedDlciA | 0 | 0 | The no. of the DLCI represented in 23 bits. |
1.3.6.1.4.1.164.8.8.6.1.25 | pktSwchFrCircuitTxPriorityA | 0 | 0 | DLCI TX Priority level. The levels are defined in the pktSwchTxPriorityTable |
1.3.6.1.4.1.164.8.8.6.1.26 | pktSwchFrCircuitIsdnRoutIdA | 0 | 0 | ISDN destination. ID in the ISDN routing table containing the outgoing ISDN address for this DLCI. Default value: 0 for no ISDN r… |