The backup DLCI which is used when the current DLCI goes inactive.
The destination protocol and destination id are the same as in the
current DLCI
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The backup DLCI which is used when the current DLCI goes inactive.
The destination protocol and destination id are the same as in the
current DLCI
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: DisplayString
Automatically extracted from www.mibdepot.com
pktSwchFrCircuitBackIdA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The backup DLCI which is used when the current DLCI goes inactive. The destination protocol and destination id are the same as in the current DLCI" ::= { pktSwchFrCircuitAEntry 5 }
pktSwchFrCircuitBackIdA OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The backup DLCI which is used when the current DLCI goes inactive. The destination protocol and destination id are the same as in the current DLCI" ::= { pktSwchFrCircuitAEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.8.6.1.1 | pktSwchFrCircuitIfIndexA | 0 | 0 | This is the ifIndex of the circuit, according to RFC 1573. |
1.3.6.1.4.1.164.8.8.6.1.2 | pktSwchFrCircuitIndexA | 0 | 0 | This Index is the DLCI of the circuit. |
1.3.6.1.4.1.164.8.8.6.1.3 | pktSwchFrCircuitDestProtA | 0 | 0 | The protocol encapsulation, if any, on this DLCI. The MPE protocol is a proprietary RAD protocol that enables a generic HDLC devi… |
1.3.6.1.4.1.164.8.8.6.1.4 | pktSwchFrCircuitDestIdA | 0 | 0 | If the DLCI destination protocol is none or async, this field has a value of an existing DLCI or async channel, respectively. Oth… |
1.3.6.1.4.1.164.8.8.6.1.6 | pktSwchFrCircuitTxCirIntervalA | 0 | 0 | The Tx CIR interval in 1/10 seconds. |
1.3.6.1.4.1.164.8.8.6.1.7 | pktSwchFrCircuitTxCommittedA | 0 | 0 | The Tx committed rate in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.8 | pktSwchFrCircuitTxExcessA | 0 | 0 | The Tx excess in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.9 | pktSwchFrCircuitRxCirIntervalA | 0 | 0 | The Rx CIR interval in 1/10 seconds. |
1.3.6.1.4.1.164.8.8.6.1.10 | pktSwchFrCircuitRxCommittedA | 0 | 0 | The Rx committed rate in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.11 | pktSwchFrCircuitRxExcessA | 0 | 0 | The Rx excess in bytes per interval. |
1.3.6.1.4.1.164.8.8.6.1.12 | pktSwchFrCircuitFunnelIdA | 0 | 0 | The funnel ID. |
1.3.6.1.4.1.164.8.8.6.1.13 | pktSwchFrCircuitFunnelStat | 0 | 0 | The funnel status. |
1.3.6.1.4.1.164.8.8.6.1.14 | pktSwchFrCircuitTxCongDiscards | 0 | 0 | The number of frames discarded because of Tx congestion. |
1.3.6.1.4.1.164.8.8.6.1.15 | pktSwchFrCircuitDeTxFrames | 0 | 0 | The number of DE Tx frames. |
1.3.6.1.4.1.164.8.8.6.1.16 | pktSwchFrCircuitDeRxFrames | 0 | 0 | The number of DE Rx frames. |
1.3.6.1.4.1.164.8.8.6.1.17 | pktSwchFrCircuitFecnTxFrames | 0 | 0 | The number of FECN Tx frames. |
1.3.6.1.4.1.164.8.8.6.1.18 | pktSwchFrCircuitBecnTxFrames | 0 | 0 | The number of BECN Tx frames. |
1.3.6.1.4.1.164.8.8.6.1.19 | pktSwchFrCircuitCommRateViolTxFrames | 0 | 0 | The number of Tx committed rate violations in number of frames. |
1.3.6.1.4.1.164.8.8.6.1.20 | pktSwchFrCircuitCommRateViolRxFrames | 0 | 0 | The number of Rx committed rate violations in number of frames. |
1.3.6.1.4.1.164.8.8.6.1.21 | pktSwchFrCircuitExcessRateViolTxFrames | 0 | 0 | The number of Tx excess rate violations in number of frames. |
1.3.6.1.4.1.164.8.8.6.1.22 | pktSwchFrCircuitExcessRateViolRxFrames | 0 | 0 | The number of Rx excess rate violations in number of frames. |
1.3.6.1.4.1.164.8.8.6.1.23 | pktSwchFrCircuitState | 0 | 0 | Indicates whether the particular virtual cir- cuit is new or not. |
1.3.6.1.4.1.164.8.8.6.1.24 | pktSwchFrCircuitExtendedDlciA | 0 | 0 | The no. of the DLCI represented in 23 bits. |
1.3.6.1.4.1.164.8.8.6.1.25 | pktSwchFrCircuitTxPriorityA | 0 | 0 | DLCI TX Priority level. The levels are defined in the pktSwchTxPriorityTable |
1.3.6.1.4.1.164.8.8.6.1.26 | pktSwchFrCircuitIsdnRoutIdA | 0 | 0 | ISDN destination. ID in the ISDN routing table containing the outgoing ISDN address for this DLCI. Default value: 0 for no ISDN r… |