This parameter represents the entry in the Remote Link Test
table. This is described below.
Parsed from file orinoco.mib.txt
Company: None
Module: ORiNOCO-MIB
This parameter represents the entry in the Remote Link Test
table. This is described below.
Parsed from file ORiNOCO-MIB.mib
Module: ORiNOCO-MIB
Vendor: Lucent Technologies
Module: ORiNOCO-MIB
[Automatically extracted from oidview.com]
oriLinkTestTableEntry OBJECT-TYPE SYNTAX OriLinkTestTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter represents the entry in the Remote Link Test table. This is described below." INDEX { oriLinkTestTableIndex } ::= { oriLinkTestTable 1 }
oriLinkTestTableEntry OBJECT-TYPE SYNTAX OriLinkTestTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter represents the entry in the Remote Link Test table. This is described below." INDEX { oriLinkTestTableIndex } ::= { oriLinkTestTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.11.5.1.1 | oriLinkTestTableIndex | 0 | 0 | This parameter represents a unique value for each stattion. The value for each station must remain constant at least from one exp… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.2 | oriLinkTestInProgress | 0 | 0 | When this parameter is set to 2 the access point will initiate a link test sequence with this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.3 | oriLinkTestStationName | 0 | 0 | This parameter identifies the name of the station whom which the link test is being performed. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.4 | oriLinkTestMACAddress | 0 | 0 | This variable represents the MAC address that will be mapped to the IP Address of the station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.5 | oriLinkTestStationProfile | 0 | 0 | This parameter represents the profile/capabilities for this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.6 | oriLinkTestOurCurSignalLevel | 0 | 0 | The current signal level (in dB) for the link test from this station. This variable indicates the running average of the local si… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.7 | oriLinkTestOurCurNoiseLevel | 0 | 0 | The current noise level (in dB) for the link test to this station. This variable indicates the running average of the local nois… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.8 | oriLinkTestOurCurSNR | 0 | 0 | The current signal to noise ratio for the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.9 | oriLinkTestOurMinSignalLevel | 0 | 0 | The minimum signal level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.10 | oriLinkTestOurMinNoiseLevel | 0 | 0 | The minimum noise level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.11 | oriLinkTestOurMinSNR | 0 | 0 | The minimum signal to noise ratio during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.12 | oriLinkTestOurMaxSignalLevel | 0 | 0 | The maximum signal level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.13 | oriLinkTestOurMaxNoiseLevel | 0 | 0 | The maximum noise level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.14 | oriLinkTestOurMaxSNR | 0 | 0 | The maximum signal to noise ratio during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.15 | oriLinkTestOurLowFrameCount | 0 | 0 | The total number of frames sent at 1 Mbit/s speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.16 | oriLinkTestOurStandardFrameCount | 0 | 0 | The total number of frames sent at 2 Mbit/s speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.17 | oriLinkTestOurMediumFrameCount | 0 | 0 | The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.18 | oriLinkTestOurHighFrameCount | 0 | 0 | The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 8 Mbit/s) speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.19 | oriLinkTestHisCurSignalLevel | 0 | 0 | The current signal level for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.20 | oriLinkTestHisCurNoiseLevel | 0 | 0 | The current noise level for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.21 | oriLinkTestHisCurSNR | 0 | 0 | The current signal to noise ratio for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.22 | oriLinkTestHisMinSignalLevel | 0 | 0 | The minimum signal level during the link test to the remote statio or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.23 | oriLinkTestHisMinNoiseLevel | 0 | 0 | The minimum noise level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.24 | oriLinkTestHisMinSNR | 0 | 0 | The minimum signal to noise ratio during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.25 | oriLinkTestHisMaxSignalLevel | 0 | 0 | The maximum signal level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.26 | oriLinkTestHisMaxNoiseLevel | 0 | 0 | The maximum noise level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.27 | oriLinkTestHisMaxSNR | 0 | 0 | The maximum signal to noise ratio during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.28 | oriLinkTestHisLowFrameCount | 0 | 0 | The total number of frames sent at 1 Mbit/s speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.29 | oriLinkTestHisStandardFrameCount | 0 | 0 | The total number of frames sent at 2 Mbit/s speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.30 | oriLinkTestHisMediumFrameCount | 0 | 0 | The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or a… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.31 | oriLinkTestHisHighFrameCount | 0 | 0 | The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or ac… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.32 | oriLinkTestInterface | 0 | 0 | The PCMCIA Card Number to which the Client has sent the Explore Response Message. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.33 | oriLinkTestRadioType | 0 | 0 | The Wireless Standard eg. IEEE 802.11 or IEEE 802.11b used on the Radio. |