The current signal level (in dB) for the link test from this
station. This variable indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Parsed from file orinoco.mib.txt
Company: None
Module: ORiNOCO-MIB
The current signal level (in dB) for the link test from this
station. This variable indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Parsed from file ORiNOCO-MIB.mib
Module: ORiNOCO-MIB
Vendor: Lucent Technologies
Module: ORiNOCO-MIB
[Automatically extracted from oidview.com]
oriLinkTestOurCurSignalLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal level (in dB) for the link test from this station. This variable indicates the running average of the local signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)." ::= { oriLinkTestTableEntry 6 }
oriLinkTestOurCurSignalLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal level (in dB) for the link test from this station. This variable indicates the running average of the local signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)." ::= { oriLinkTestTableEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.11.5.1.1 | oriLinkTestTableIndex | 0 | 0 | This parameter represents a unique value for each stattion. The value for each station must remain constant at least from one exp… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.2 | oriLinkTestInProgress | 0 | 0 | When this parameter is set to 2 the access point will initiate a link test sequence with this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.3 | oriLinkTestStationName | 0 | 0 | This parameter identifies the name of the station whom which the link test is being performed. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.4 | oriLinkTestMACAddress | 0 | 0 | This variable represents the MAC address that will be mapped to the IP Address of the station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.5 | oriLinkTestStationProfile | 0 | 0 | This parameter represents the profile/capabilities for this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.7 | oriLinkTestOurCurNoiseLevel | 0 | 0 | The current noise level (in dB) for the link test to this station. This variable indicates the running average of the local nois… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.8 | oriLinkTestOurCurSNR | 0 | 0 | The current signal to noise ratio for the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.9 | oriLinkTestOurMinSignalLevel | 0 | 0 | The minimum signal level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.10 | oriLinkTestOurMinNoiseLevel | 0 | 0 | The minimum noise level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.11 | oriLinkTestOurMinSNR | 0 | 0 | The minimum signal to noise ratio during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.12 | oriLinkTestOurMaxSignalLevel | 0 | 0 | The maximum signal level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.13 | oriLinkTestOurMaxNoiseLevel | 0 | 0 | The maximum noise level during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.14 | oriLinkTestOurMaxSNR | 0 | 0 | The maximum signal to noise ratio during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.15 | oriLinkTestOurLowFrameCount | 0 | 0 | The total number of frames sent at 1 Mbit/s speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.16 | oriLinkTestOurStandardFrameCount | 0 | 0 | The total number of frames sent at 2 Mbit/s speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.17 | oriLinkTestOurMediumFrameCount | 0 | 0 | The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.18 | oriLinkTestOurHighFrameCount | 0 | 0 | The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 8 Mbit/s) speed during the link test to this station. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.19 | oriLinkTestHisCurSignalLevel | 0 | 0 | The current signal level for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.20 | oriLinkTestHisCurNoiseLevel | 0 | 0 | The current noise level for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.21 | oriLinkTestHisCurSNR | 0 | 0 | The current signal to noise ratio for the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.22 | oriLinkTestHisMinSignalLevel | 0 | 0 | The minimum signal level during the link test to the remote statio or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.23 | oriLinkTestHisMinNoiseLevel | 0 | 0 | The minimum noise level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.24 | oriLinkTestHisMinSNR | 0 | 0 | The minimum signal to noise ratio during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.25 | oriLinkTestHisMaxSignalLevel | 0 | 0 | The maximum signal level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.26 | oriLinkTestHisMaxNoiseLevel | 0 | 0 | The maximum noise level during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.27 | oriLinkTestHisMaxSNR | 0 | 0 | The maximum signal to noise ratio during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.28 | oriLinkTestHisLowFrameCount | 0 | 0 | The total number of frames sent at 1 Mbit/s speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.29 | oriLinkTestHisStandardFrameCount | 0 | 0 | The total number of frames sent at 2 Mbit/s speed during the link test to the remote station or access point. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.30 | oriLinkTestHisMediumFrameCount | 0 | 0 | The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or a… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.31 | oriLinkTestHisHighFrameCount | 0 | 0 | The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or ac… |
| 1.3.6.1.4.1.1751.2.4.11.5.1.32 | oriLinkTestInterface | 0 | 0 | The PCMCIA Card Number to which the Client has sent the Explore Response Message. |
| 1.3.6.1.4.1.1751.2.4.11.5.1.33 | oriLinkTestRadioType | 0 | 0 | The Wireless Standard eg. IEEE 802.11 or IEEE 802.11b used on the Radio. |