Describes a specific entry of the filter rule configuration table.
Parsed from file pdn_mpe_filter.mib.txt
Company: None
Module: PDN-MPE-FILTER-MIB
Describes a specific entry of the filter rule configuration table.
Parsed from file PDN-MPE-FILTER-MIB.mib
Module: PDN-MPE-FILTER-MIB
Vendor: Paradyne
Module: PDN-MPE-FILTER-MIB
[Automatically extracted from oidview.com]
mpeSysDevIpFilterRuleConfigTableEntry OBJECT-TYPE SYNTAX MpeSysDevIpFilterRuleConfigTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a specific entry of the filter rule configuration table." INDEX { entPhysicalIndex, mpeSysDevIpRuleFilterName, mpeSysDevIpFilterRuleNumber } ::= { mpeSysDevIpFilterRuleConfigTable 1 }
mpeSysDevIpFilterRuleConfigTableEntry OBJECT-TYPE SYNTAX MpeSysDevIpFilterRuleConfigTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a specific entry of the filter rule configuration table." INDEX { entPhysicalIndex, mpeSysDevIpRuleFilterName, mpeSysDevIpFilterRuleNumber } ::= { mpeSysDevIpFilterRuleConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.1 | mpeSysDevIpRuleFilterName | 0 | 0 | The value of this object corresponds directly to the name of the filter. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.2 | mpeSysDevIpFilterRuleNumber | 0 | 0 | The value of this object corresponds directly to a rule within a particular filter. If the value of this object is 0, then the se… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.3 | mpeSysDevIpFilterRuleSrcAddress | 0 | 0 | The value of this object corresponds directly to an source IP Address. This object could be set if IP packets need to be filtered… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.4 | mpeSysDevIpFilterRuleSrcAddrMask | 0 | 0 | The value of this object corresponds directly to an source IP Address Mask. The value of this object is bitwise anded with the so… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.5 | mpeSysDevIpFilterRuleSrcAddrCompEnable | 0 | 0 | This object enables or disables the source address comparison. It is not supported for MCC. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.6 | mpeSysDevIpFilterRuleSrcPortNum | 0 | 0 | The UDP or TCP port number of the source on which this filter is applied. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.7 | mpeSysDevIpFilterRuleMaxSrcPortNum | 0 | 0 | The maximum UDP or TCP port number of the source on which this filter is applied. This object is valid only if the source compari… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.8 | mpeSysDevIpFilterRuleSrcCompType | 0 | 0 | The value of this object corresponds to the type of comparison which is to be made for source based filtering for the particular … |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.9 | mpeSysDevIpFilterRuleDestAddress | 0 | 0 | The value of this object corresponds directly to an destination IP Address. This object could be set if IP packets need to be fil… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.10 | mpeSysDevIpFilterRuleDestAddrMask | 0 | 0 | The value of this object corresponds directly to an destination IP Address Mask. The value of this object is bitwise anded with t… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.11 | mpeSysDevIpFilterRuleDestAddrCompEnable | 0 | 0 | This object enables or disables the destination address comparison. It is not supported for MCC. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.12 | mpeSysDevIpFilterRuleDestPortNum | 0 | 0 | The UDP or TCP port number of the destination on which this filter is applied |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.13 | mpeSysDevIpFilterRuleMaxDestPortNum | 0 | 0 | The maximum UDP or TCP port number of the destination on which this filter is applied. This object is valid only if the destinat… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.14 | mpeSysDevIpFilterRuleDestCompType | 0 | 0 | The value of this object corresponds to the type of comparison which is to be made for destination based filtering for the partic… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.15 | mpeSysDevIpFilterRuleType | 0 | 0 | The value of this object corresponds to the type of type of rule configured static - This indicates that the rule was configured b… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.16 | mpeSysDevIpFilterRuleProtocolTypeUdp | 0 | 0 | The value of this object corresponds to the action taken on a particular UDP packet based on the source/ destination port compari… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.17 | mpeSysDevIpFilterRuleProtocolTypeTcp | 0 | 0 | The value of this object corresponds to the action taken on a particular TCP packet bases on the source/ destination port compari… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.18 | mpeSysDevIpFilterRuleProtocolTypeIcmp | 0 | 0 | The value of this object corresponds to the action taken on a particular ICMP packet bases on the protocol type comparison rule. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.19 | mpeSysDevIpFilterRuleRowStatus | 0 | 0 | The object is used to add or delete a row from this table. |