The value of this object corresponds directly to an destination
IP Address. This object could be set if IP packets need to be
filtered based on where it is going to.
Parsed from file pdn_mpe_filter.mib.txt
Company: None
Module: PDN-MPE-FILTER-MIB
The value of this object corresponds directly to an destination
IP Address. This object could be set if IP packets need to be
filtered based on where it is going to.
Parsed from file PDN-MPE-FILTER-MIB.mib
Module: PDN-MPE-FILTER-MIB
Vendor: Paradyne
Module: PDN-MPE-FILTER-MIB
[Automatically extracted from oidview.com]
mpeSysDevIpFilterRuleDestAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object corresponds directly to an destination IP Address. This object could be set if IP packets need to be filtered based on where it is going to." ::= { mpeSysDevIpFilterRuleConfigTableEntry 9 }
mpeSysDevIpFilterRuleDestAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object corresponds directly to an destination IP Address. This object could be set if IP packets need to be filtered based on where it is going to." ::= { mpeSysDevIpFilterRuleConfigTableEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.1 | mpeSysDevIpRuleFilterName | 0 | 0 | The value of this object corresponds directly to the name of the filter. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.2 | mpeSysDevIpFilterRuleNumber | 0 | 0 | The value of this object corresponds directly to a rule within a particular filter. If the value of this object is 0, then the se… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.3 | mpeSysDevIpFilterRuleSrcAddress | 0 | 0 | The value of this object corresponds directly to an source IP Address. This object could be set if IP packets need to be filtered… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.4 | mpeSysDevIpFilterRuleSrcAddrMask | 0 | 0 | The value of this object corresponds directly to an source IP Address Mask. The value of this object is bitwise anded with the so… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.5 | mpeSysDevIpFilterRuleSrcAddrCompEnable | 0 | 0 | This object enables or disables the source address comparison. It is not supported for MCC. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.6 | mpeSysDevIpFilterRuleSrcPortNum | 0 | 0 | The UDP or TCP port number of the source on which this filter is applied. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.7 | mpeSysDevIpFilterRuleMaxSrcPortNum | 0 | 0 | The maximum UDP or TCP port number of the source on which this filter is applied. This object is valid only if the source compari… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.8 | mpeSysDevIpFilterRuleSrcCompType | 0 | 0 | The value of this object corresponds to the type of comparison which is to be made for source based filtering for the particular … |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.10 | mpeSysDevIpFilterRuleDestAddrMask | 0 | 0 | The value of this object corresponds directly to an destination IP Address Mask. The value of this object is bitwise anded with t… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.11 | mpeSysDevIpFilterRuleDestAddrCompEnable | 0 | 0 | This object enables or disables the destination address comparison. It is not supported for MCC. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.12 | mpeSysDevIpFilterRuleDestPortNum | 0 | 0 | The UDP or TCP port number of the destination on which this filter is applied |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.13 | mpeSysDevIpFilterRuleMaxDestPortNum | 0 | 0 | The maximum UDP or TCP port number of the destination on which this filter is applied. This object is valid only if the destinat… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.14 | mpeSysDevIpFilterRuleDestCompType | 0 | 0 | The value of this object corresponds to the type of comparison which is to be made for destination based filtering for the partic… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.15 | mpeSysDevIpFilterRuleType | 0 | 0 | The value of this object corresponds to the type of type of rule configured static - This indicates that the rule was configured b… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.16 | mpeSysDevIpFilterRuleProtocolTypeUdp | 0 | 0 | The value of this object corresponds to the action taken on a particular UDP packet based on the source/ destination port compari… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.17 | mpeSysDevIpFilterRuleProtocolTypeTcp | 0 | 0 | The value of this object corresponds to the action taken on a particular TCP packet bases on the source/ destination port compari… |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.18 | mpeSysDevIpFilterRuleProtocolTypeIcmp | 0 | 0 | The value of this object corresponds to the action taken on a particular ICMP packet bases on the protocol type comparison rule. |
| 1.3.6.1.4.1.1795.2.24.12.23.1.1.2.1.19 | mpeSysDevIpFilterRuleRowStatus | 0 | 0 | The object is used to add or delete a row from this table. |