The configuration information about one
Etherloop CO modem port.
Parsed from file PDN-ELOOP-MIB.mib.txt
Company: paradyne
Module: PDN-ELOOP-MIB
Vendor: Paradyne
Module: PDN-ELOOP-MIB (PDN-ELOOP-MIB.mib)
Type: ENTRY
Access: not-accessible
Syntax: EloopCOMdmIfPortEntry
Automatically extracted from www.mibdepot.com
eloopCOMdmIfPortEntry OBJECT-TYPE SYNTAX EloopCOMdmIfPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration information about one Etherloop CO modem port." INDEX { eloopCOMdmIfIndex } ::= { eloopCOMdmIfPortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.1 | eloopCOMdmIfStackUnit | 0 | 0 | The stack unit number for the CO modem interface, this identifies the physical unit in a stacked BS24e configuration. For non-sta… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.2 | eloopCOMdmIfSlot | 0 | 0 | The slot number for the CO modem interface, this identifies the switch port on a BS24e unit. |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.3 | eloopCOMdmIfPort | 0 | 0 | The port number on the CO modem device, this identifies the Etherloop port on a CO modem device in a either a STATMUX or a 10306/… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.4 | eloopCOMdmIfUpRateLimit | 0 | 0 | The upstream data rate limit in 64 kbps(bits per sec), the CO modem shall forward this information to the CPE modem to be manage… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.5 | eloopCOMdmIfDownRateLimit | 0 | 0 | The downstream data rate limit in 64 kbps (bits per sec). The CO modem manages the downstream rate limit, which is set by the man… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.6 | eloopCOMdmIfUpRateThreshold | 0 | 0 | The upstream data rate threshold, which is set by the management entity, in units of 64 kbps (bits per sec). A notification is se… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.7 | eloopCOMdmIfDownRateThreshold | 0 | 0 | The downstream data rat threshold, which is set by the management entity, in units of 64 kbps (bits per sec). A notification is s… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.8 | eloopCOMdmIfMaxUpBurstSize | 0 | 0 | The maximum upstream burst size in 8Kb, the CO modem forwards this information to the CPE modem to be managed there. A zero value… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.9 | eloopCOMdmIfMaxDownBurstSize | 0 | 0 | The maximum downstream burst size in 8Kb, the CO modem manages the burst size. A zero value clears the burst size limiting. |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.10 | eloopCOMdmIfRecurTrngDelay | 0 | 0 | The interval, in seconds, between training bursts. The default is 4 for 6224/12:1 and 1 for all other modems. |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.11 | eloopCOMdmIfForceHighSpeed | 0 | 0 | If this object is Forced, then this modem interface will always run at maximum speed. |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.12 | eloopCOMdmIfSecureVlan | 0 | 0 | If set to Uturns(1), . |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.13 | eloopCOMdmIfClearStats | 0 | 0 | If clear(2) is written to this object, the counters on this interface and the associated Ethernet port are set to 0 and a trap is… |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.14 | eloopCOMdmIfTrapStatus | 0 | 0 | eloopCOMdmIftrapStatus |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.15 | eloopCOMdmIfResetTrng | 0 | 0 | If reset(2) is written to the object, forces the port to reset and begin power-on training. |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.16 | eloopCOMdmIfTrngMode | 0 | 0 | eloopCOMdmIftrngMode |
| 1.3.6.1.4.1.1795.2.24.18.4.2.2.2.1.17 | eloopCOMdmIfStandbyTraining | 0 | 0 | To enable/disable CO Modem Standby Training. By default, the Standby Training is ENABLED, in which the CO modem passively waits f… |