This object is used to specify which interfaces
will generate linkUp, linkDown, and enterpriseSpecific
trap messages. These traps are supported on the network
interfaces sync, com, and DSX-1 data ports.
Parsed from file hot_msdsl.mib.txt
Company: paradyne
Module: HOTWIRE-MSDSL-INTERFACE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
msdslConfigTrapLinkTrapInterface OBJECT-TYPE SYNTAX INTEGER { network(1), dsx-1(2), g703(3), sync(4), com(5), all(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to specify which interfaces will generate linkUp, linkDown, and enterpriseSpecific trap messages. These traps are supported on the network interfaces sync, com, and DSX-1 data ports." ::= { msdslConfiguration 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.23.0 | msdslConfigTrapLinkTrapInterface | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.1 | msdslNetworkTable | 1 | 11 | The MSDSL Network Interface Options table. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.2 | msdsldsx1Table | 1 | 4 | The MSDSL DSX-1 Interface Options table. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.3 | msdslG703Table | 1 | 4 | The MSDSL G.703 Interface Options table. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.4 | msdslSyncTable | 1 | 11 | The MSDSL Synchronous Data Port Interface Options table. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.5 | msdslConfigSystemDSLMode | 1 | 1 | This object is used to specify if the unit is configured as a network terminating unit (NTU), or as a line terminating (LTU) unit… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.6 | msdslConfigSystemLineTermination | 1 | 1 | This object determines the line impedance. This is for the G.703 device only. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.7 | msdslConfigSystemTelcoLB | 1 | 1 | This object determines if the device will respond to Telco loopback signals on the DSX-1 interface. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.8 | msdslConfigSystemRemoteTelcoLB | 1 | 1 | This object determines if the unit will perform a Telco initiated line loopback on just the local unit (the one that detected the… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.9 | msdslConfigComPortType | 1 | 1 | This object is used when the communication port is configured as a network communication link and specifies whether the port will… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.10 | msdslConfigComIgnoreCntlLeads | 1 | 1 | This object is used to specify whether DTR is used. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.11 | msdslConfigComInactivityTO | 1 | 1 | This object is used to specify whether a user session should be disconnected (logged off) after a specified period of inactivity. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.12 | msdslConfigComDiscTime | 1 | 1 | This object is used to specify how long to wait before disconnecting. Inactivity is defined as no keyboard activity within a given… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.13 | msdslConfigTelnetSession | 1 | 1 | This object is used when the communication port is configured as a network communication link and specifies whether the port will… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.14 | msdslConfigTelnetLogin | 1 | 1 | This object is used to specify whether a user session should require a username and password. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.15 | msdslConfigTelnetAccessLevel | 1 | 1 | This object is used to specify the level of access privilages. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.16 | msdslConfigNodeIPaddr | 1 | 1 | This object is used to specify the IP address needed to access the node. Since this IP address is not bound to a particular port… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.17 | msdslConfigNodeSubnetMask | 1 | 1 | This object is used to specify the Subnet Mask needed to access the node. Since this Subnet Mask is not bound to a particular por… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.18 | msdslConfigDefaultNetDest | 1 | 1 | This object is used to specify the default network destination. This option allows the user to specify where the default network … |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.19 | msdslConfigComIPaddr | 1 | 1 | This object is used to specify the IP address needed to access the unit when the communication port is configured as a network co… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.20 | msdslConfigComSubnetMask | 1 | 1 | This object is used to specify the Subnet Mask needed to access the unit when the communication port is configured as a network c… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.21 | msdslConfigLinkProtocol | 1 | 1 | This object is used to specify the link layer protocol to use when the communication port is configured as a network communicatio… |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.22 | msdslConfigTrapDestination | 1 | 1 | This object is used to choose the destination of traps. NOTE: This is used by endpoints only |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.24 | msdslDSLSWrevision | 1 | 1 | The Software revision for the GlobeSpan device in this entity. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.25 | msdslDSLHWrevision | 1 | 1 | The Hardware revision for the GlobeSpan device in this entity. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.26 | msdslDSLlineCode | 1 | 1 | The DSL line code type for this entity. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.27 | msdslLEDsTable | 1 | 3 | A list of the msdsl LED entries. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28 | msdslFracTable | 1 | 6 | The Paradyne MSDSL Cross Connect Table. |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29 | msdslPortConfigAllocMethodTable | 1 | 3 | The Paradyne MSDSL Cross Connect Allocation Method Table. |