This object indicates if factory defaults are to be loaded.
If set to enabled(1), factory defaults are loaded. If set
to disabled(2), the initialization string in
wfModemCfgInitString is not sent to the modem.
Parsed from file console.mib.txt
Company: None
Module: Wellfleet-CONSOLE-MIB
This object indicates if factory defaults are to be loaded.
If set to enabled(1), factory defaults are loaded. If set
to disabled(2), the initialization string in
wfModemCfgInitString is not sent to the modem.
Parsed from file Wellfleet-CONSOLE-MIB.mib
Module: Wellfleet-CONSOLE-MIB
Vendor: Wellfleet
Module: Wellfleet-CONSOLE-MIB
[Automatically extracted from oidview.com]
wfSerialPortModemCfgFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates if factory defaults are to be loaded. If set to enabled(1), factory defaults are loaded. If set to disabled(2), the initialization string in wfModemCfgInitString is not sent to the modem." DEFVAL { enabled } ::= { wfSerialPortEntry 38 }
wfSerialPortModemCfgFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates if factory defaults are to be loaded. If set to enabled(1), factory defaults are loaded. If set to disabled(2), the initialization string in wfModemCfgInitString is not sent to the modem." DEFVAL { enabled } ::= { wfSerialPortEntry 38 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.3.2.11.1.1.1 | wfSerialPortDelete | 0 | 0 | Flag to indicate Serial Port instance deletion |
1.3.6.1.4.1.18.3.3.2.11.1.1.2 | wfSerialPortDisable | 0 | 0 | Enable or disable this Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.3 | wfSerialPortState | 0 | 0 | The state of this Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.4 | wfSerialPortNumber | 0 | 0 | Serial Port number |
1.3.6.1.4.1.18.3.3.2.11.1.1.5 | wfSerialPortName | 0 | 0 | Serial Port name |
1.3.6.1.4.1.18.3.3.2.11.1.1.6 | wfSerialPortSlot | 0 | 0 | Slot number of Serial Port session |
1.3.6.1.4.1.18.3.3.2.11.1.1.7 | wfSerialPortType | 0 | 0 | Type of Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.8 | wfSerialPortBaudRate | 0 | 0 | Baud rate configured on this Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.9 | wfSerialPortDataBits | 0 | 0 | Number of data bits configured on this Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.10 | wfSerialPortParity | 0 | 0 | Type of parity configured on this Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.11 | wfSerialPortStopBits | 0 | 0 | Number of stop bits configured on this Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.12 | wfSerialPortModemEnable | 0 | 0 | Enable the Serial Port to run with modem leads enabled |
1.3.6.1.4.1.18.3.3.2.11.1.1.13 | wfSerialPortLinesPerScreen | 0 | 0 | Number of lines which can be displayed in one screen on the Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.14 | wfSerialPortMoreEnable | 0 | 0 | Enable the 'more' feature on the Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.15 | wfSerialPortPrompt | 0 | 0 | Character string which will be used as the system prompt on the Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.16 | wfSerialPortLoginTimeOut | 0 | 0 | IF MODEM_ENABLED then time out in minutes to HUP when at the login prompt |
1.3.6.1.4.1.18.3.3.2.11.1.1.17 | wfSerialPortPasswordTimeOut | 0 | 0 | Timout on Password entry |
1.3.6.1.4.1.18.3.3.2.11.1.1.18 | wfSerialPortCommandTimeOut | 0 | 0 | IF MODEM_ENABLED then time out in minutes to HUP when at the command prompt |
1.3.6.1.4.1.18.3.3.2.11.1.1.19 | wfSerialPortLoginRetries | 0 | 0 | IF MODEM_ENABLED then limit # of login attempts then HUP |
1.3.6.1.4.1.18.3.3.2.11.1.1.20 | wfSerialPortTotalLogins | 0 | 0 | Total number of TI login attempts on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.21 | wfSerialPortUserLoginErrors | 0 | 0 | Total number of FAILED User login attempts on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.22 | wfSerialPortManagerLoginErrors | 0 | 0 | Total number of FAILED Manager login attempts on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.23 | wfSerialPortOtherLoginErrors | 0 | 0 | Total number of FAILED Other login attempts on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.24 | wfSerialPortTtyFrameErrors | 0 | 0 | Count of TTY Frame errors on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.25 | wfSerialPortTtyOverrunErrors | 0 | 0 | Count of TTY Overrun errors on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.26 | wfSerialPortTtyParityErrors | 0 | 0 | Count of TTY Parity errors on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.27 | wfSerialPortTtyInfifoErrors | 0 | 0 | Count of TTY Input Fifo errors on Serial Port |
1.3.6.1.4.1.18.3.3.2.11.1.1.28 | wfSerialPortInitialSearchPath | 0 | 0 | Example: 'A:;1:;2:' or '2:;4:6:;9: |
1.3.6.1.4.1.18.3.3.2.11.1.1.29 | wfSerialPortManagerAutoScript | 0 | 0 | for each login. |
1.3.6.1.4.1.18.3.3.2.11.1.1.30 | wfSerialPortUserAutoScript | 0 | 0 | for each login. |
1.3.6.1.4.1.18.3.3.2.11.1.1.31 | wfSerialPortUserAbortLogoutDisable | 0 | 0 | a USER from escaping out of the User Autoscript |
1.3.6.1.4.1.18.3.3.2.11.1.1.32 | wfSerialPortHistoryDepth | 0 | 0 | TI command history table size |
1.3.6.1.4.1.18.3.3.2.11.1.1.33 | wfSerialPortAutoSaveNumFiles | 0 | 0 | Number of times AutoSave will save the log 0 - disable the AutoSave log |
1.3.6.1.4.1.18.3.3.2.11.1.1.34 | wfSerialPortAutoSaveVolume | 0 | 0 | Volume, to which AutoSave will save logs Example: 'A:' or '2:' |
1.3.6.1.4.1.18.3.3.2.11.1.1.35 | wfSerialPortModemIdSwRev | 0 | 0 | A textual description of the modem's firmware version number. |
1.3.6.1.4.1.18.3.3.2.11.1.1.36 | wfSerialPortModemIdHwRev | 0 | 0 | A textual description of the revision number of the modem daughter card. |
1.3.6.1.4.1.18.3.3.2.11.1.1.37 | wfSerialPortModemLineState | 0 | 0 | Indicates the state of the modem. |
1.3.6.1.4.1.18.3.3.2.11.1.1.39 | wfSerialPortModemCfgInitString | 0 | 0 | An initialization string that will be sent to the modem each time the modem is rebooted. |
1.3.6.1.4.1.18.3.3.2.11.1.1.40 | wfSerialPortModemCfgDefaultString | 0 | 0 | The string contains AT comands for initializing the modem every time the modem comes up, regardless of configuration. |
1.3.6.1.4.1.18.3.3.2.11.1.1.41 | wfSerialPortModemCfgResultCodeString | 0 | 0 | The ASCII response string returned by the modem. Response strings will be returned in response to last command to the modem and i… |
1.3.6.1.4.1.18.3.3.2.11.1.1.42 | wfSerialPortModemCfgState | 0 | 0 | Indicates the state of AT command processing. When a new initialization string is to be sent to the modem, the sender sets the st… |
1.3.6.1.4.1.18.3.3.2.11.1.1.43 | wfSerialPortModemCfgCountry | 0 | 0 | Identifies the country the modem is designed to operate in. This object is not read from the modem directly. It must be entered m… |
1.3.6.1.4.1.18.3.3.2.11.1.1.44 | wfSerialPortModemInitState | 0 | 0 | Indictes the state of the modem initialization sequence. The state will freeze in the state that fails when a failure is detecte… |