Information about a particular driver
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
Information about a particular driver
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmizerDrvCfgEntry OBJECT-TYPE SYNTAX WfAtmizerDrvCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular driver" INDEX { wfAtmizerDrvCfgSlot, wfAtmizerDrvCfgPort } ::= { wfAtmizerDrvCfgTable 1 }
wfAtmizerDrvCfgEntry OBJECT-TYPE SYNTAX WfAtmizerDrvCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular driver" INDEX { wfAtmizerDrvCfgSlot, wfAtmizerDrvCfgPort } ::= { wfAtmizerDrvCfgTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.23.3.2.1.1 | wfAtmizerDrvCfgDelete | 0 | 0 | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.2 | wfAtmizerDrvCfgEnable | 0 | 0 | Enable/disable driver parameter. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.3 | wfAtmizerDrvCfgState | 0 | 0 | Driver state parameter. This parameter does not represent the state of the physical interface! |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.4 | wfAtmizerDrvCfgSlot | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.5 | wfAtmizerDrvCfgPort | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.6 | wfAtmizerDrvCfgCct | 0 | 0 | Circuit number for the driver. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.7 | wfAtmizerDrvCfgLineNumber | 0 | 0 | The LineNumber is an Index value used to uniquely identify an instance of a physical ATM port. This value shall be used as an ins… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.8 | wfAtmizerDrvCfgType | 0 | 0 | The type of interface. This attribute is an alias for 'ifType. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.9 | wfAtmizerDrvCfgMtu | 0 | 0 | The size of the largest packet which can be sent/received on the interface, specified in octets. This attribute is an alias for '… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.10 | wfAtmizerDrvCfgSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. This attribute is an alias for 'ifSpeed'. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.11 | wfAtmizerDrvCfgDpNotify | 0 | 0 | Data Path (DP) notify function. This function, when enabled, will disable the DP interface when the physical interface becomes no… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.12 | wfAtmizerDrvCfgDpNotifyTimeout | 0 | 0 | Data Path (DP) notify function timeout period. This value specifies the number of seconds to wait before implementing the DP not… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.13 | wfAtmizerDrvCfgVcInactEnable | 0 | 0 | Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.14 | wfAtmizerDrvCfgVcInactTimeout | 0 | 0 | Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.15 | wfAtmizerDrvCfgMadrCt | 0 | 0 | Number of PROM-based MAC addresses. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.16 | wfAtmizerDrvCfgMadr | 0 | 0 | First MAC address in canonical format (i.e., 00-00-a2...). The number of subsequent MAC addresses is specified by wfAtmizerDrvCf… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.17 | wfAtmizerDrvCfgFramingMode | 0 | 0 | The framing (transceiver) mode for the physical interface |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.18 | wfAtmizerDrvCfgClkSource | 0 | 0 | Source of the physical interface clocking signal, either internal or external. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.19 | wfAtmizerDrvCfgLogLevel | 0 | 0 | Bit mask which controls the amount of logging done by the ATM driver. If a bit in the mask is set, it enables logging of an even… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.20 | wfAtmizerDrvCfgDsx3SendCode | 0 | 0 | This variable indicates what type of code is being sent across DS3/E3 interface by the device. (These are optional for E3 interfa… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.21 | wfAtmizerDrvCfgDsx3LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the DS3/E3 interface. Ther values mean: ATM_DSX3_LOOPBACK_NONE : Not i… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.22 | wfAtmizerDrvCfgDs3Scrambling | 0 | 0 | This variable represents if scrambling is turned on or off |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.23 | wfAtmizerDrvCfgDs3LineBuildOut | 0 | 0 | This variable represents the Line Build Out for the DS3 short and long cables. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.24 | wfAtmizerDrvCfgModule | 0 | 0 | Module number for ASN type platforms. For non-ASN platforms this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.25 | wfAtmizerFramingMode | 0 | 0 | The actual framing (transceiver) mode for the physical interface |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.26 | wfAtmizerDrvCfgIwfCct | 0 | 0 | This variable represents the circuit number assotiated with FR/ATM Interworking Service record. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.27 | wfAtmizerDrvCfgCcType | 0 | 0 | Which one is the Call Control module, ATM or MPLS? |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.28 | wfAtmizerDrvCfgMaxVcls | 0 | 0 | The maximum number of Virtual Channel Links (VCLs) that are supported at the ATM driver interface. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.29 | wfAtmizerDrvCfgCurrVcls | 0 | 0 | The number of Virtual Channel Links (VCLs) currently active. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.30 | wfAtmizerDrvCfgScrSum | 0 | 0 | Total sum of all VC Sustainable Cell Rates (SCR). Used for Call Admission Control (CAC). |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.31 | wfAtmizerDrvCfgExtRate | 0 | 0 | A user specified value for line speed which, if non-zero, will be reported as ifEntry.ifSpeed. It has no effect on operation of t… |