Inactivity timeout value for all SVCs on this interface in seconds.
If no cells have been transmitted or received on an SVC over the given
timeout period then the SVC will be closed. If this value is set to
zero, then the SVCs inactivity timer will be disabled for this interface.
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
Inactivity timeout value for all SVCs on this interface in seconds.
If no cells have been transmitted or received on an SVC over the given
timeout period then the SVC will be closed. If this value is set to
zero, then the SVCs inactivity timer will be disabled for this interface.
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmizerDrvCfgVcInactEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over the given timeout period then the SVC will be closed. If this value is set to zero, then the SVCs inactivity timer will be disabled for this interface." DEFVAL { enable } ::= { wfAtmizerDrvCfgEntry 13 }
wfAtmizerDrvCfgVcInactEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over the given timeout period then the SVC will be closed. If this value is set to zero, then the SVCs inactivity timer will be disabled for this interface." DEFVAL { enable } ::= { wfAtmizerDrvCfgEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.23.3.2.1.1 | wfAtmizerDrvCfgDelete | 0 | 0 | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.2 | wfAtmizerDrvCfgEnable | 0 | 0 | Enable/disable driver parameter. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.3 | wfAtmizerDrvCfgState | 0 | 0 | Driver state parameter. This parameter does not represent the state of the physical interface! |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.4 | wfAtmizerDrvCfgSlot | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.5 | wfAtmizerDrvCfgPort | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.6 | wfAtmizerDrvCfgCct | 0 | 0 | Circuit number for the driver. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.7 | wfAtmizerDrvCfgLineNumber | 0 | 0 | The LineNumber is an Index value used to uniquely identify an instance of a physical ATM port. This value shall be used as an ins… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.8 | wfAtmizerDrvCfgType | 0 | 0 | The type of interface. This attribute is an alias for 'ifType. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.9 | wfAtmizerDrvCfgMtu | 0 | 0 | The size of the largest packet which can be sent/received on the interface, specified in octets. This attribute is an alias for '… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.10 | wfAtmizerDrvCfgSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. This attribute is an alias for 'ifSpeed'. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.11 | wfAtmizerDrvCfgDpNotify | 0 | 0 | Data Path (DP) notify function. This function, when enabled, will disable the DP interface when the physical interface becomes no… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.12 | wfAtmizerDrvCfgDpNotifyTimeout | 0 | 0 | Data Path (DP) notify function timeout period. This value specifies the number of seconds to wait before implementing the DP not… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.14 | wfAtmizerDrvCfgVcInactTimeout | 0 | 0 | Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.15 | wfAtmizerDrvCfgMadrCt | 0 | 0 | Number of PROM-based MAC addresses. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.16 | wfAtmizerDrvCfgMadr | 0 | 0 | First MAC address in canonical format (i.e., 00-00-a2...). The number of subsequent MAC addresses is specified by wfAtmizerDrvCf… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.17 | wfAtmizerDrvCfgFramingMode | 0 | 0 | The framing (transceiver) mode for the physical interface |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.18 | wfAtmizerDrvCfgClkSource | 0 | 0 | Source of the physical interface clocking signal, either internal or external. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.19 | wfAtmizerDrvCfgLogLevel | 0 | 0 | Bit mask which controls the amount of logging done by the ATM driver. If a bit in the mask is set, it enables logging of an even… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.20 | wfAtmizerDrvCfgDsx3SendCode | 0 | 0 | This variable indicates what type of code is being sent across DS3/E3 interface by the device. (These are optional for E3 interfa… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.21 | wfAtmizerDrvCfgDsx3LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the DS3/E3 interface. Ther values mean: ATM_DSX3_LOOPBACK_NONE : Not i… |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.22 | wfAtmizerDrvCfgDs3Scrambling | 0 | 0 | This variable represents if scrambling is turned on or off |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.23 | wfAtmizerDrvCfgDs3LineBuildOut | 0 | 0 | This variable represents the Line Build Out for the DS3 short and long cables. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.24 | wfAtmizerDrvCfgModule | 0 | 0 | Module number for ASN type platforms. For non-ASN platforms this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.25 | wfAtmizerFramingMode | 0 | 0 | The actual framing (transceiver) mode for the physical interface |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.26 | wfAtmizerDrvCfgIwfCct | 0 | 0 | This variable represents the circuit number assotiated with FR/ATM Interworking Service record. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.27 | wfAtmizerDrvCfgCcType | 0 | 0 | Which one is the Call Control module, ATM or MPLS? |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.28 | wfAtmizerDrvCfgMaxVcls | 0 | 0 | The maximum number of Virtual Channel Links (VCLs) that are supported at the ATM driver interface. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.29 | wfAtmizerDrvCfgCurrVcls | 0 | 0 | The number of Virtual Channel Links (VCLs) currently active. |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.30 | wfAtmizerDrvCfgScrSum | 0 | 0 | Total sum of all VC Sustainable Cell Rates (SCR). Used for Call Admission Control (CAC). |
| 1.3.6.1.4.1.18.3.4.23.3.2.1.31 | wfAtmizerDrvCfgExtRate | 0 | 0 | A user specified value for line speed which, if non-zero, will be reported as ifEntry.ifSpeed. It has no effect on operation of t… |