This object indicates if factory defaults are to be loaded.
If set to enabled(1), factory defaults are loaded. If set
to disabled(2), the initialization string in
wfModemCfgInitString is sent to the modem.
Parsed from file modem.mib.txt
Company: None
Module: Wellfleet-Modem-MIB
This object indicates if factory defaults are to be loaded.
If set to enabled(1), factory defaults are loaded. If set
to disabled(2), the initialization string in
wfModemCfgInitString is sent to the modem.
Parsed from file Wellfleet-Modem-MIB.mib
Module: Wellfleet-Modem-MIB
Vendor: Wellfleet
Module: Wellfleet-Modem-MIB
[Automatically extracted from oidview.com]
wfModemCfgFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates if factory defaults are to be loaded. If set to enabled(1), factory defaults are loaded. If set to disabled(2), the initialization string in wfModemCfgInitString is sent to the modem." DEFVAL { enabled } ::= { wfModemEntry 8 }
wfModemCfgFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates if factory defaults are to be loaded. If set to enabled(1), factory defaults are loaded. If set to disabled(2), the initialization string in wfModemCfgInitString is sent to the modem." DEFVAL { enabled } ::= { wfModemEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.29.1.1.1 | wfModemDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.29.1.1.2 | wfModemSlot | 0 | 0 | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.29.1.1.3 | wfModemConnector | 0 | 0 | Instance ID Connector, filled in by the driver. |
| 1.3.6.1.4.1.18.3.4.29.1.1.4 | wfModemIdSwRev | 0 | 0 | A textual description of the modem's firmware version number. |
| 1.3.6.1.4.1.18.3.4.29.1.1.5 | wfModemIdHwRev | 0 | 0 | A textual description of the revision number of the modem daughter card. |
| 1.3.6.1.4.1.18.3.4.29.1.1.6 | wfModemLineState | 0 | 0 | Indicates the state of the modem. |
| 1.3.6.1.4.1.18.3.4.29.1.1.7 | wfModemConnectionFailReason | 0 | 0 | indicates the reason for the last failed connection |
| 1.3.6.1.4.1.18.3.4.29.1.1.9 | wfModemCfgInitString | 0 | 0 | An initialization string that will be sent to the modem each time the modem is rebooted. |
| 1.3.6.1.4.1.18.3.4.29.1.1.10 | wfModemCfgDefaultString | 0 | 0 | The string contains AT comands for initializing the modem every time the modem comes up, regardless of configuration. |
| 1.3.6.1.4.1.18.3.4.29.1.1.11 | wfModemCfgResultCodeString | 0 | 0 | The ASCII response string returned by the modem. Response strings will be returned in response to last command to the modem and i… |
| 1.3.6.1.4.1.18.3.4.29.1.1.12 | wfModemCfgState | 0 | 0 | Indicates the state of AT command processing. When a new initialization string is to be sent to the modem, the sender sets the st… |
| 1.3.6.1.4.1.18.3.4.29.1.1.13 | wfModemCfgCountry | 0 | 0 | Identifies the country the modem is designed to operate in. This object is not read from the modem directly. It must be entered m… |
| 1.3.6.1.4.1.18.3.4.29.1.1.14 | wfModemV54Lpbk | 0 | 0 | Enables the operator to control, and examine the state of, V.54 loopbacks within the modem. This object equates to the AT&Tn comm… |
| 1.3.6.1.4.1.18.3.4.29.1.1.15 | wfModemV54Timer | 0 | 0 | Duration in seconds that a test specified in wfModemV.54Lpbk is to execute. |
| 1.3.6.1.4.1.18.3.4.29.1.1.16 | wfModemV54Errors | 0 | 0 | Indicates the number of errors reported during the last loopback test. This count will only be updated for loopbacks with test pa… |
| 1.3.6.1.4.1.18.3.4.29.1.1.17 | wfModemV54RemLpbkDetect | 0 | 0 | This object controls whether or not this modem will acknowledge V.54 Remote Loop 2 requests from a remote Site. When ENABLED, thi… |
| 1.3.6.1.4.1.18.3.4.29.1.1.18 | wfModemPhoneNumber | 0 | 0 | Contains the phone number for the modem to dial. |
| 1.3.6.1.4.1.18.3.4.29.1.1.19 | wfModemInitState | 0 | 0 | Indictes the state of the modem initialization sequence. The state will freeze in the state that fails when a failure is detecte… |
| 1.3.6.1.4.1.18.3.4.29.1.1.20 | wfModemUnitReset | 0 | 0 | Enables the operator to remotely reset the unit. Using this command will cause the unit to terminate all its connections and drop… |
| 1.3.6.1.4.1.18.3.4.29.1.1.21 | wfModemType | 0 | 0 | Enables a user to specify a modem type attached to the port thus enabling Site Manager to put a preconfigured modem init string i… |