An initialization string that will be sent to the modem
each time the modem is rebooted.
Parsed from file modem.mib.txt
Company: None
Module: Wellfleet-Modem-MIB
An initialization string that will be sent to the modem
each time the modem is rebooted.
Parsed from file Wellfleet-Modem-MIB.mib
Module: Wellfleet-Modem-MIB
Vendor: Wellfleet
Module: Wellfleet-Modem-MIB
[Automatically extracted from oidview.com]
wfModemCfgInitString OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "An initialization string that will be sent to the modem each time the modem is rebooted." ::= { wfModemEntry 9 }
wfModemCfgInitString OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "An initialization string that will be sent to the modem each time the modem is rebooted." ::= { wfModemEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.29.1.1.1 | wfModemDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.29.1.1.2 | wfModemSlot | 0 | 0 | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.29.1.1.3 | wfModemConnector | 0 | 0 | Instance ID Connector, filled in by the driver. |
| 1.3.6.1.4.1.18.3.4.29.1.1.4 | wfModemIdSwRev | 0 | 0 | A textual description of the modem's firmware version number. |
| 1.3.6.1.4.1.18.3.4.29.1.1.5 | wfModemIdHwRev | 0 | 0 | A textual description of the revision number of the modem daughter card. |
| 1.3.6.1.4.1.18.3.4.29.1.1.6 | wfModemLineState | 0 | 0 | Indicates the state of the modem. |
| 1.3.6.1.4.1.18.3.4.29.1.1.7 | wfModemConnectionFailReason | 0 | 0 | indicates the reason for the last failed connection |
| 1.3.6.1.4.1.18.3.4.29.1.1.8 | wfModemCfgFactoryDefaults | 0 | 0 | This object indicates if factory defaults are to be loaded. If set to enabled(1), factory defaults are loaded. If set to disabled… |
| 1.3.6.1.4.1.18.3.4.29.1.1.10 | wfModemCfgDefaultString | 0 | 0 | The string contains AT comands for initializing the modem every time the modem comes up, regardless of configuration. |
| 1.3.6.1.4.1.18.3.4.29.1.1.11 | wfModemCfgResultCodeString | 0 | 0 | The ASCII response string returned by the modem. Response strings will be returned in response to last command to the modem and i… |
| 1.3.6.1.4.1.18.3.4.29.1.1.12 | wfModemCfgState | 0 | 0 | Indicates the state of AT command processing. When a new initialization string is to be sent to the modem, the sender sets the st… |
| 1.3.6.1.4.1.18.3.4.29.1.1.13 | wfModemCfgCountry | 0 | 0 | Identifies the country the modem is designed to operate in. This object is not read from the modem directly. It must be entered m… |
| 1.3.6.1.4.1.18.3.4.29.1.1.14 | wfModemV54Lpbk | 0 | 0 | Enables the operator to control, and examine the state of, V.54 loopbacks within the modem. This object equates to the AT&Tn comm… |
| 1.3.6.1.4.1.18.3.4.29.1.1.15 | wfModemV54Timer | 0 | 0 | Duration in seconds that a test specified in wfModemV.54Lpbk is to execute. |
| 1.3.6.1.4.1.18.3.4.29.1.1.16 | wfModemV54Errors | 0 | 0 | Indicates the number of errors reported during the last loopback test. This count will only be updated for loopbacks with test pa… |
| 1.3.6.1.4.1.18.3.4.29.1.1.17 | wfModemV54RemLpbkDetect | 0 | 0 | This object controls whether or not this modem will acknowledge V.54 Remote Loop 2 requests from a remote Site. When ENABLED, thi… |
| 1.3.6.1.4.1.18.3.4.29.1.1.18 | wfModemPhoneNumber | 0 | 0 | Contains the phone number for the modem to dial. |
| 1.3.6.1.4.1.18.3.4.29.1.1.19 | wfModemInitState | 0 | 0 | Indictes the state of the modem initialization sequence. The state will freeze in the state that fails when a failure is detecte… |
| 1.3.6.1.4.1.18.3.4.29.1.1.20 | wfModemUnitReset | 0 | 0 | Enables the operator to remotely reset the unit. Using this command will cause the unit to terminate all its connections and drop… |
| 1.3.6.1.4.1.18.3.4.29.1.1.21 | wfModemType | 0 | 0 | Enables a user to specify a modem type attached to the port thus enabling Site Manager to put a preconfigured modem init string i… |