Number of frames received without error
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
Number of frames received without error
Parsed from file Wellfleet-DS1E1-MIB.mib
Module: Wellfleet-DS1E1-MIB
Vendor: Wellfleet
Module: Wellfleet-DS1E1-MIB
[Automatically extracted from oidview.com]
wfLogicalLineRxFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of frames received without error " ::= { wfLogicalLineEntry 22 }
wfLogicalLineRxFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames received without error" ::= { wfLogicalLineEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.9.6.1.1 | wfLogicalLineDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.9.6.1.2 | wfLogicalLineDisable | 0 | 0 | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.9.6.1.3 | wfLogicalLineState | 0 | 0 | Line Driver state variable |
| 1.3.6.1.4.1.18.3.4.9.6.1.4 | wfLogicalLinePortLineNumber | 0 | 0 | Instance ID PortLineNumber, filled in by driver |
| 1.3.6.1.4.1.18.3.4.9.6.1.5 | wfLogicalLineIndex | 0 | 0 | Index for this line instance, filled in by driver. The index corresponds to the position of the circuit, from 1 to 31, on the por… |
| 1.3.6.1.4.1.18.3.4.9.6.1.6 | wfLogicalLineCct | 0 | 0 | Circuit number for this line instance |
| 1.3.6.1.4.1.18.3.4.9.6.1.7 | wfLogicalLineLineNumber | 0 | 0 | LineNumber for this logical line instance. This is the same line number contained in the PORT_TABLE with the channel field nonze… |
| 1.3.6.1.4.1.18.3.4.9.6.1.8 | wfLogicalLineBofl | 0 | 0 | Selects Breath of Life (BOFL) parameter. If selected, a BOFL packet is sent out on the wire as often as specifies by the wfLogica… |
| 1.3.6.1.4.1.18.3.4.9.6.1.9 | wfLogicalLineBoflTmo | 0 | 0 | Indicates the time-period between BOFL packets |
| 1.3.6.1.4.1.18.3.4.9.6.1.10 | wfLogicalLineFractionalLoopback | 0 | 0 | Any Logical Line on this T1/E1 port is capable of being put into loopback, i.e. data coming into that circuit from the wire is mi… |
| 1.3.6.1.4.1.18.3.4.9.6.1.11 | wfLogicalLineTimeSlotAssignment | 0 | 0 | Lists the time-slots which constitute this channel. Read only attribute that contains a list of time-slots from 1 to 31 used by… |
| 1.3.6.1.4.1.18.3.4.9.6.1.12 | wfLogicalLineMtu | 0 | 0 | Contains the largest frame size that can be received by the logical line. Anything larger than the MTU will be discarded. In all… |
| 1.3.6.1.4.1.18.3.4.9.6.1.13 | wfLogicalLineMadr | 0 | 0 | Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom. |
| 1.3.6.1.4.1.18.3.4.9.6.1.14 | wfLogicalLineWanProtocol | 0 | 0 | WAN protocol selection is provided via this parameter. The supported protocols can be selected per circuit. |
| 1.3.6.1.4.1.18.3.4.9.6.1.15 | wfLogicalLineHdlcService | 0 | 0 | HDLC Service type for this line. Transparent is raw HDLC mode, LLC1 will prefix the HDLC address and control fields to the frame. |
| 1.3.6.1.4.1.18.3.4.9.6.1.16 | wfLogicalLineLocalHdlcAddress | 0 | 0 | This attribute is only used if the Wan protocol is Wellfleet Standard Proprietary Point to Point. This attribute is unused for … |
| 1.3.6.1.4.1.18.3.4.9.6.1.17 | wfLogicalLineRemoteHdlcAddress | 0 | 0 | This attribute is only used if the Wan protocol is Wellfleet Standard Proprietary Point to Point. This attribute is unused for … |
| 1.3.6.1.4.1.18.3.4.9.6.1.18 | wfLogicalLineRateAdaption | 0 | 0 | Determines the number of bits and their bit positions within the time-slot. 64k selection uses all 8 bits in the time-slot. The t… |
| 1.3.6.1.4.1.18.3.4.9.6.1.19 | wfLogicalLineIFTF | 0 | 0 | Determines the Interframe time fill character to be transmitted by the MUNICH. In case of IFTF_FLAGS, 0x7E is sent and in case of… |
| 1.3.6.1.4.1.18.3.4.9.6.1.20 | wfLogicalLineCRCSize | 0 | 0 | Determines the CRC Size. When CRC32 is selected a 32 bit CRC is appended to the frame being transmitted and a 32 bit CRC check is… |
| 1.3.6.1.4.1.18.3.4.9.6.1.21 | wfLogicalLineRxOctets | 0 | 0 | Number of octets received without error |
| 1.3.6.1.4.1.18.3.4.9.6.1.23 | wfLogicalLineTxOctets | 0 | 0 | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.4.9.6.1.24 | wfLogicalLineTxFrames | 0 | 0 | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.4.9.6.1.25 | wfLogicalLineRxErrors | 0 | 0 | Number of receive errors |
| 1.3.6.1.4.1.18.3.4.9.6.1.26 | wfLogicalLineTxErrors | 0 | 0 | Number of transmission errors |
| 1.3.6.1.4.1.18.3.4.9.6.1.27 | wfLogicalLineLackRxResources | 0 | 0 | Number of Rx frames dropped due to lack of buffer resources |
| 1.3.6.1.4.1.18.3.4.9.6.1.28 | wfLogicalLineLackTxResources | 0 | 0 | Number of Tx frames dropped due to lack of system resources |
| 1.3.6.1.4.1.18.3.4.9.6.1.29 | wfLogicalLineTxUnderflows | 0 | 0 | Number of Tx frames dropped due to Transmit underflow |
| 1.3.6.1.4.1.18.3.4.9.6.1.30 | wfLogicalLineRxOverflows | 0 | 0 | Number of Rx frames dropped due to Receive overflow |
| 1.3.6.1.4.1.18.3.4.9.6.1.31 | wfLogicalLineRxNullFrames | 0 | 0 | Number of short frames received (with no data bytes) |
| 1.3.6.1.4.1.18.3.4.9.6.1.32 | wfLogicalLineRxShortFrames | 0 | 0 | Number of short frames received whose length is either 1 or 2 data bytes. |
| 1.3.6.1.4.1.18.3.4.9.6.1.33 | wfLogicalLineRxLossSyncs | 0 | 0 | Loss of synchronization on receiver |
| 1.3.6.1.4.1.18.3.4.9.6.1.34 | wfLogicalLineRxCRCErrors | 0 | 0 | CRC error received |
| 1.3.6.1.4.1.18.3.4.9.6.1.35 | wfLogicalLineRxNonOctetBits | 0 | 0 | Non-Octet bits received in frame |
| 1.3.6.1.4.1.18.3.4.9.6.1.36 | wfLogicalLineRxLongFrames | 0 | 0 | Frame longer than MFL received |
| 1.3.6.1.4.1.18.3.4.9.6.1.37 | wfLogicalLineRxAbortFrames | 0 | 0 | Aborted frame received |
| 1.3.6.1.4.1.18.3.4.9.6.1.38 | wfLogicalLineRxDescOverflows | 0 | 0 | Receive overflow on chip buffer |
| 1.3.6.1.4.1.18.3.4.9.6.1.39 | wfLogicalLineRxReplenMisses | 0 | 0 | Count of number of packet buffer misses while attempting to replenish driver receive ring |
| 1.3.6.1.4.1.18.3.4.9.6.1.40 | wfLogicalLineRxIFCs | 0 | 0 | Number of times the device detects a change of interframe time-fill between incomming frames. |
| 1.3.6.1.4.1.18.3.4.9.6.1.41 | wfLogicalLineRxDropPackets | 0 | 0 | Number of packets dropped after reception |
| 1.3.6.1.4.1.18.3.4.9.6.1.42 | wfLogicalLineCfgTxQueueLength | 0 | 0 | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special mea… |
| 1.3.6.1.4.1.18.3.4.9.6.1.43 | wfLogicalLineCfgRxQueueLength | 0 | 0 | Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special mean… |
| 1.3.6.1.4.1.18.3.4.9.6.1.44 | wfLogicalLineTxQueueLength | 0 | 0 | Current hardware transmit queue length |
| 1.3.6.1.4.1.18.3.4.9.6.1.45 | wfLogicalLineRxQueueLength | 0 | 0 | Current Receive queue length |
| 1.3.6.1.4.1.18.3.4.9.6.1.46 | wfLogicalLineTxQueueEmpties | 0 | 0 | The number of times the transmit ring is found empty when transmitting packets |
| 1.3.6.1.4.1.18.3.4.9.6.1.47 | wfLogicalLineRxIntProcs | 0 | 0 | DEBUG paramete - Receive Interrupt processing count |
| 1.3.6.1.4.1.18.3.4.9.6.1.48 | wfLogicalLineTxIntProcs | 0 | 0 | DEBUG parameter - Tx interrupt processing count |
| 1.3.6.1.4.1.18.3.4.9.6.1.49 | wfLogicalLineRxPktCorruptions | 0 | 0 | DEBUG parameter - Corruption check on receive |
| 1.3.6.1.4.1.18.3.4.9.6.1.50 | wfLogicalLineTurboBofl | 0 | 0 | DEBUG parameter - Turbo bofl enabled or disabled |
| 1.3.6.1.4.1.18.3.4.9.6.1.51 | wfLogicalLineBoflNum | 0 | 0 | DEBUG parameter - Number of breath of life packets per breath of life |
| 1.3.6.1.4.1.18.3.4.9.6.1.52 | wfLogicalLineBoflLen | 0 | 0 | DEBUG parameter - breath of life packet length |
| 1.3.6.1.4.1.18.3.4.9.6.1.53 | wfLogicalLineOutQLen | 0 | 0 | The instantaneous current length of the output packet queue (in packets). |
| 1.3.6.1.4.1.18.3.4.9.6.1.54 | wfLogicalLineLastChange | 0 | 0 | The value of SysUpTime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the… |
| 1.3.6.1.4.1.18.3.4.9.6.1.55 | wfLogicalLineCfgMtu | 0 | 0 | Specifies the largest frame size that can be received by the logical line. Anything larger than the MTU will be discarded. |
| 1.3.6.1.4.1.18.3.4.9.6.1.56 | wfLogicalLineRemoteLpbkDetection | 0 | 0 | This attribute enables Remote Loopback Detection. When enabled along with wfLogicalLineBofl, the device driver will detect when… |
| 1.3.6.1.4.1.18.3.4.9.6.1.57 | wfLogicalLineLastState | 0 | 0 | The state which the Logical Line driver was in prior to the most recent re-initialization. |
| 1.3.6.1.4.1.18.3.4.9.6.1.58 | wfLogicalLineRxIdles | 0 | 0 | Number of received frames followed by ShortFrame errors reported by the hardware. ShortFrame errors imediately after received f… |
| 1.3.6.1.4.1.18.3.4.9.6.1.59 | wfLogicalLineRole | 0 | 0 | Specifies the role of this Logical Line. This attribute directs the Logical Line to be either a normal permanent synchronous con… |
| 1.3.6.1.4.1.18.3.4.9.6.1.60 | wfLogicalLineActiveCct | 0 | 0 | Active CCT number for this LogicalLine. Used in ISDN PRI to indicate the CCT of the current call in progress. |
| 1.3.6.1.4.1.18.3.4.9.6.1.61 | wfLogicalLineActualRateAdaption | 0 | 0 | Indicates the current Rate Adaption in use. This may differ from the configured Rate Adaption in ISDN PRI applications. This at… |
| 1.3.6.1.4.1.18.3.4.9.6.1.62 | wfLogicalLineBertMode | 0 | 0 | Enables BERT testing on a logical line level. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.63 | wfLogicalLineBertTestPattern | 0 | 0 | Test pattern for BERT. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.64 | wfLogicalLineAcceptFracLoopCode | 0 | 0 | Allows logical line to accept Fractional T1 Loop Code. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.65 | wfLogicalLineDS0AStatus | 0 | 0 | Indicates logical line set to T1 DS0-A Subrates. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.66 | wfLogicalLineNRZIEnable | 0 | 0 | Allows logical line to accept T1 NRZI encoding on logical Line. This feature is only supported by the QMRT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.67 | wfLogicalLineNRZIType | 0 | 0 | Defines logical line to T1 NRZI encoding as either Mark or Space on logical Line. This feature is only supported by the … |