Configured Receive Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero cuases router based default values to be used. Values larger
than the compiled ring size are truncated to the compiled ring
size. Sets to this attribute may take up to one minute to take effect.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
Configured Receive Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero cuases router based default values to be used. Values larger
than the compiled ring size are truncated to the compiled ring
size. Sets to this attribute may take up to one minute to take effect.
Parsed from file Wellfleet-DS1E1-MIB.mib
Module: Wellfleet-DS1E1-MIB
Vendor: Wellfleet
Module: Wellfleet-DS1E1-MIB
[Automatically extracted from oidview.com]
wfLogicalLineCfgRxQueueLength OBJECT-TYPE SYNTAX INTEGER(0..512) ACCESS read-write STATUS mandatory DESCRIPTION " Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero cuases router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size. Sets to this attribute may take up to one minute to take effect. " ::= { wfLogicalLineEntry 43 }
wfLogicalLineCfgRxQueueLength OBJECT-TYPE SYNTAX INTEGER(0..512) ACCESS read-write STATUS mandatory DESCRIPTION "Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero cuases router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size. Sets to this attribute may take up to one minute to take effect." ::= { wfLogicalLineEntry 43 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.9.6.1.1 | wfLogicalLineDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.9.6.1.2 | wfLogicalLineDisable | 0 | 0 | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.9.6.1.3 | wfLogicalLineState | 0 | 0 | Line Driver state variable |
| 1.3.6.1.4.1.18.3.4.9.6.1.4 | wfLogicalLinePortLineNumber | 0 | 0 | Instance ID PortLineNumber, filled in by driver |
| 1.3.6.1.4.1.18.3.4.9.6.1.5 | wfLogicalLineIndex | 0 | 0 | Index for this line instance, filled in by driver. The index corresponds to the position of the circuit, from 1 to 31, on the por… |
| 1.3.6.1.4.1.18.3.4.9.6.1.6 | wfLogicalLineCct | 0 | 0 | Circuit number for this line instance |
| 1.3.6.1.4.1.18.3.4.9.6.1.7 | wfLogicalLineLineNumber | 0 | 0 | LineNumber for this logical line instance. This is the same line number contained in the PORT_TABLE with the channel field nonze… |
| 1.3.6.1.4.1.18.3.4.9.6.1.8 | wfLogicalLineBofl | 0 | 0 | Selects Breath of Life (BOFL) parameter. If selected, a BOFL packet is sent out on the wire as often as specifies by the wfLogica… |
| 1.3.6.1.4.1.18.3.4.9.6.1.9 | wfLogicalLineBoflTmo | 0 | 0 | Indicates the time-period between BOFL packets |
| 1.3.6.1.4.1.18.3.4.9.6.1.10 | wfLogicalLineFractionalLoopback | 0 | 0 | Any Logical Line on this T1/E1 port is capable of being put into loopback, i.e. data coming into that circuit from the wire is mi… |
| 1.3.6.1.4.1.18.3.4.9.6.1.11 | wfLogicalLineTimeSlotAssignment | 0 | 0 | Lists the time-slots which constitute this channel. Read only attribute that contains a list of time-slots from 1 to 31 used by… |
| 1.3.6.1.4.1.18.3.4.9.6.1.12 | wfLogicalLineMtu | 0 | 0 | Contains the largest frame size that can be received by the logical line. Anything larger than the MTU will be discarded. In all… |
| 1.3.6.1.4.1.18.3.4.9.6.1.13 | wfLogicalLineMadr | 0 | 0 | Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom. |
| 1.3.6.1.4.1.18.3.4.9.6.1.14 | wfLogicalLineWanProtocol | 0 | 0 | WAN protocol selection is provided via this parameter. The supported protocols can be selected per circuit. |
| 1.3.6.1.4.1.18.3.4.9.6.1.15 | wfLogicalLineHdlcService | 0 | 0 | HDLC Service type for this line. Transparent is raw HDLC mode, LLC1 will prefix the HDLC address and control fields to the frame. |
| 1.3.6.1.4.1.18.3.4.9.6.1.16 | wfLogicalLineLocalHdlcAddress | 0 | 0 | This attribute is only used if the Wan protocol is Wellfleet Standard Proprietary Point to Point. This attribute is unused for … |
| 1.3.6.1.4.1.18.3.4.9.6.1.17 | wfLogicalLineRemoteHdlcAddress | 0 | 0 | This attribute is only used if the Wan protocol is Wellfleet Standard Proprietary Point to Point. This attribute is unused for … |
| 1.3.6.1.4.1.18.3.4.9.6.1.18 | wfLogicalLineRateAdaption | 0 | 0 | Determines the number of bits and their bit positions within the time-slot. 64k selection uses all 8 bits in the time-slot. The t… |
| 1.3.6.1.4.1.18.3.4.9.6.1.19 | wfLogicalLineIFTF | 0 | 0 | Determines the Interframe time fill character to be transmitted by the MUNICH. In case of IFTF_FLAGS, 0x7E is sent and in case of… |
| 1.3.6.1.4.1.18.3.4.9.6.1.20 | wfLogicalLineCRCSize | 0 | 0 | Determines the CRC Size. When CRC32 is selected a 32 bit CRC is appended to the frame being transmitted and a 32 bit CRC check is… |
| 1.3.6.1.4.1.18.3.4.9.6.1.21 | wfLogicalLineRxOctets | 0 | 0 | Number of octets received without error |
| 1.3.6.1.4.1.18.3.4.9.6.1.22 | wfLogicalLineRxFrames | 0 | 0 | Number of frames received without error |
| 1.3.6.1.4.1.18.3.4.9.6.1.23 | wfLogicalLineTxOctets | 0 | 0 | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.4.9.6.1.24 | wfLogicalLineTxFrames | 0 | 0 | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.4.9.6.1.25 | wfLogicalLineRxErrors | 0 | 0 | Number of receive errors |
| 1.3.6.1.4.1.18.3.4.9.6.1.26 | wfLogicalLineTxErrors | 0 | 0 | Number of transmission errors |
| 1.3.6.1.4.1.18.3.4.9.6.1.27 | wfLogicalLineLackRxResources | 0 | 0 | Number of Rx frames dropped due to lack of buffer resources |
| 1.3.6.1.4.1.18.3.4.9.6.1.28 | wfLogicalLineLackTxResources | 0 | 0 | Number of Tx frames dropped due to lack of system resources |
| 1.3.6.1.4.1.18.3.4.9.6.1.29 | wfLogicalLineTxUnderflows | 0 | 0 | Number of Tx frames dropped due to Transmit underflow |
| 1.3.6.1.4.1.18.3.4.9.6.1.30 | wfLogicalLineRxOverflows | 0 | 0 | Number of Rx frames dropped due to Receive overflow |
| 1.3.6.1.4.1.18.3.4.9.6.1.31 | wfLogicalLineRxNullFrames | 0 | 0 | Number of short frames received (with no data bytes) |
| 1.3.6.1.4.1.18.3.4.9.6.1.32 | wfLogicalLineRxShortFrames | 0 | 0 | Number of short frames received whose length is either 1 or 2 data bytes. |
| 1.3.6.1.4.1.18.3.4.9.6.1.33 | wfLogicalLineRxLossSyncs | 0 | 0 | Loss of synchronization on receiver |
| 1.3.6.1.4.1.18.3.4.9.6.1.34 | wfLogicalLineRxCRCErrors | 0 | 0 | CRC error received |
| 1.3.6.1.4.1.18.3.4.9.6.1.35 | wfLogicalLineRxNonOctetBits | 0 | 0 | Non-Octet bits received in frame |
| 1.3.6.1.4.1.18.3.4.9.6.1.36 | wfLogicalLineRxLongFrames | 0 | 0 | Frame longer than MFL received |
| 1.3.6.1.4.1.18.3.4.9.6.1.37 | wfLogicalLineRxAbortFrames | 0 | 0 | Aborted frame received |
| 1.3.6.1.4.1.18.3.4.9.6.1.38 | wfLogicalLineRxDescOverflows | 0 | 0 | Receive overflow on chip buffer |
| 1.3.6.1.4.1.18.3.4.9.6.1.39 | wfLogicalLineRxReplenMisses | 0 | 0 | Count of number of packet buffer misses while attempting to replenish driver receive ring |
| 1.3.6.1.4.1.18.3.4.9.6.1.40 | wfLogicalLineRxIFCs | 0 | 0 | Number of times the device detects a change of interframe time-fill between incomming frames. |
| 1.3.6.1.4.1.18.3.4.9.6.1.41 | wfLogicalLineRxDropPackets | 0 | 0 | Number of packets dropped after reception |
| 1.3.6.1.4.1.18.3.4.9.6.1.42 | wfLogicalLineCfgTxQueueLength | 0 | 0 | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special mea… |
| 1.3.6.1.4.1.18.3.4.9.6.1.44 | wfLogicalLineTxQueueLength | 0 | 0 | Current hardware transmit queue length |
| 1.3.6.1.4.1.18.3.4.9.6.1.45 | wfLogicalLineRxQueueLength | 0 | 0 | Current Receive queue length |
| 1.3.6.1.4.1.18.3.4.9.6.1.46 | wfLogicalLineTxQueueEmpties | 0 | 0 | The number of times the transmit ring is found empty when transmitting packets |
| 1.3.6.1.4.1.18.3.4.9.6.1.47 | wfLogicalLineRxIntProcs | 0 | 0 | DEBUG paramete - Receive Interrupt processing count |
| 1.3.6.1.4.1.18.3.4.9.6.1.48 | wfLogicalLineTxIntProcs | 0 | 0 | DEBUG parameter - Tx interrupt processing count |
| 1.3.6.1.4.1.18.3.4.9.6.1.49 | wfLogicalLineRxPktCorruptions | 0 | 0 | DEBUG parameter - Corruption check on receive |
| 1.3.6.1.4.1.18.3.4.9.6.1.50 | wfLogicalLineTurboBofl | 0 | 0 | DEBUG parameter - Turbo bofl enabled or disabled |
| 1.3.6.1.4.1.18.3.4.9.6.1.51 | wfLogicalLineBoflNum | 0 | 0 | DEBUG parameter - Number of breath of life packets per breath of life |
| 1.3.6.1.4.1.18.3.4.9.6.1.52 | wfLogicalLineBoflLen | 0 | 0 | DEBUG parameter - breath of life packet length |
| 1.3.6.1.4.1.18.3.4.9.6.1.53 | wfLogicalLineOutQLen | 0 | 0 | The instantaneous current length of the output packet queue (in packets). |
| 1.3.6.1.4.1.18.3.4.9.6.1.54 | wfLogicalLineLastChange | 0 | 0 | The value of SysUpTime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the… |
| 1.3.6.1.4.1.18.3.4.9.6.1.55 | wfLogicalLineCfgMtu | 0 | 0 | Specifies the largest frame size that can be received by the logical line. Anything larger than the MTU will be discarded. |
| 1.3.6.1.4.1.18.3.4.9.6.1.56 | wfLogicalLineRemoteLpbkDetection | 0 | 0 | This attribute enables Remote Loopback Detection. When enabled along with wfLogicalLineBofl, the device driver will detect when… |
| 1.3.6.1.4.1.18.3.4.9.6.1.57 | wfLogicalLineLastState | 0 | 0 | The state which the Logical Line driver was in prior to the most recent re-initialization. |
| 1.3.6.1.4.1.18.3.4.9.6.1.58 | wfLogicalLineRxIdles | 0 | 0 | Number of received frames followed by ShortFrame errors reported by the hardware. ShortFrame errors imediately after received f… |
| 1.3.6.1.4.1.18.3.4.9.6.1.59 | wfLogicalLineRole | 0 | 0 | Specifies the role of this Logical Line. This attribute directs the Logical Line to be either a normal permanent synchronous con… |
| 1.3.6.1.4.1.18.3.4.9.6.1.60 | wfLogicalLineActiveCct | 0 | 0 | Active CCT number for this LogicalLine. Used in ISDN PRI to indicate the CCT of the current call in progress. |
| 1.3.6.1.4.1.18.3.4.9.6.1.61 | wfLogicalLineActualRateAdaption | 0 | 0 | Indicates the current Rate Adaption in use. This may differ from the configured Rate Adaption in ISDN PRI applications. This at… |
| 1.3.6.1.4.1.18.3.4.9.6.1.62 | wfLogicalLineBertMode | 0 | 0 | Enables BERT testing on a logical line level. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.63 | wfLogicalLineBertTestPattern | 0 | 0 | Test pattern for BERT. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.64 | wfLogicalLineAcceptFracLoopCode | 0 | 0 | Allows logical line to accept Fractional T1 Loop Code. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.65 | wfLogicalLineDS0AStatus | 0 | 0 | Indicates logical line set to T1 DS0-A Subrates. This feature is only supported by the QMCT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.66 | wfLogicalLineNRZIEnable | 0 | 0 | Allows logical line to accept T1 NRZI encoding on logical Line. This feature is only supported by the QMRT1. |
| 1.3.6.1.4.1.18.3.4.9.6.1.67 | wfLogicalLineNRZIType | 0 | 0 | Defines logical line to T1 NRZI encoding as either Mark or Space on logical Line. This feature is only supported by the … |