Entry format for the table of circuit options
Parsed from file cctopts.mib.txt
Company: None
Module: Wellfleet-CCTOPTS-MIB
Entry format for the table of circuit options
Parsed from file Wellfleet-Series7-MIB.mib
Module: Wellfleet-Series7-MIB
Vendor: Wellfleet
Module: Wellfleet-CCTOPTS-MIB
[Automatically extracted from oidview.com]
wfCctOptsEntry OBJECT-TYPE SYNTAX WfCctOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry format for the table of circuit options" INDEX { wfCctOptsCct } ::= { wfCctOptsTable 1 }
wfCctOptsEntry OBJECT-TYPE SYNTAX WfCctOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Entry format for the table of circuit options " INDEX { wfCctOptsCct } ::= { wfCctOptsTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.4.1.1.1 | wfCctOptsDelete | 0 | 0 | Creation and deletion flag for this record |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.2 | wfCctOptsPriorityQueueingDisable | 0 | 0 | Priority Queuing option |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.3 | wfCctOptsCct | 0 | 0 | circuit number |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.4 | wfCctOptsHighPriorityQueueLimit | 0 | 0 | High Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.5 | wfCctOptsNormalPriorityQueueLimit | 0 | 0 | Normal Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.6 | wfCctOptsLowPriorityQueueLimit | 0 | 0 | Low Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.7 | wfCctOptsMaxInterruptQueueLatency | 0 | 0 | Interrupt Queue Latency |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.8 | wfCctOptsMaxHighPriorityQueueLatency | 0 | 0 | High Priority Queue Latency |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.9 | wfCctOptsHiXmits | 0 | 0 | High Priority Transmit count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.10 | wfCctOptsNormalXmits | 0 | 0 | Normal Priority Transmit count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.11 | wfCctOptsLoXmits | 0 | 0 | Low Priority Transmit count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.12 | wfCctOptsHiClippedPkts | 0 | 0 | High Prio Transmit Clip Count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.13 | wfCctOptsNormalClippedPkts | 0 | 0 | Normal Prio Transmit Clip Count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.14 | wfCctOptsLoClippedPkts | 0 | 0 | Low Prio Transmit Clip Count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.15 | wfCctOptsIntrQHighWaterPkts | 0 | 0 | Interrupt Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.16 | wfCctOptsHiQHighWaterPkts | 0 | 0 | High-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.17 | wfCctOptsNormalQHighWaterPkts | 0 | 0 | Normal Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.18 | wfCctOptsLoQHighWaterPkts | 0 | 0 | Low-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.19 | wfCctOptsHighWaterPktsClear | 0 | 0 | Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.20 | wfCctOptsDroppedPkts | 0 | 0 | Packets which were filtered in Priority Queueing |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.21 | wfCctOptsLargePkts | 0 | 0 | Large Packets which became an exception to latency rules |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.22 | wfCctOptsRxPkts | 0 | 0 | Packets received |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.23 | wfCctOptsChooserType | 0 | 0 | Algorithm to choose line within a multiline circuit |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.24 | wfCctOptsPqDequeueAlgType | 0 | 0 | Selection of Priority Queueing dequeueing algorithm PQ_STRICT_PRIORITIZATION is 'classical' 7.50 dequeueing. PQ_BANDWIDTH_ALLOCAT… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.25 | wfCctOptsHiPercent | 0 | 0 | This is the percent of the SYNC line bandwidth that the network manager wishes to allocate to traffic which has been configured t… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.26 | wfCctOptsNormalPercent | 0 | 0 | The minimum percent of the SYNC line that Normal-priority traffic will get (if there is any) when the Bandwidth Allocation featur… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.27 | wfCctOptsLoPercent | 0 | 0 | The minimum percent of the SYNC line that Low-priority traffic will get (if there is any) when the Bandwidth Allocation feature i… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.28 | wfCctOptsHiTotalOctets | 0 | 0 | Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.29 | wfCctOptsNormalTotalOctets | 0 | 0 | Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.30 | wfCctOptsLoTotalOctets | 0 | 0 | Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.31 | wfCctOptsCircuitType | 0 | 0 | Circuit Type Attribute |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.32 | wfCctOptsBackupCct | 0 | 0 | backup circuit number |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.33 | wfCctOptsPrimaryCctWanProtocolType | 0 | 0 | The type of WAN protocol type which is running on the primary line. This attribute is only read when a dial backup circuit is usi… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.34 | wfCctOptsMacFilterFormat | 0 | 0 | Used to force the Mac src/dst address to be matched in Token Ring format. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.35 | wfCctOptsPktsNotQueued | 0 | 0 | Packets that were not Queued or Dropped by Priority Queuing |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.36 | wfCctOptsBitsShiftCount | 0 | 0 | Used to shift src/dst address to the right when addressed based chooser is set. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.37 | wfCctOptsFrSetDeLowQ | 0 | 0 | Used on Frame Relay interfaces, allows Set of DE ( Discard Eligible ) bit of packets that end up in PQ's Low Queue, the Default i… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.38 | wfCctOptsFrSetDeNormQ | 0 | 0 | Used on Frame Relay interfaces, allows Set of DE ( Discard Eligible ) bit of packets that end up in PQ's Normal Queue, the Defaul… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.39 | wfCctOptsShapedPriorityQueueLimit | 0 | 0 | Frame Relay Traffic Shaping Priority Queue Limit. the minimum valid value is zerom no maximum valid value (limited by bufs for th… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.40 | wfCctOptsMaxShapedPriorityQueueLatency | 0 | 0 | Frame Relay Traffic Shaping Priority Queue Latency. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.41 | wfCctOptsShapedXmits | 0 | 0 | Frame Relay Traffic Shaping Priority Transmit count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.42 | wfCctOptsShapedClippedPkts | 0 | 0 | Frame Relay Traffic Shaping Transmit Clip count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.43 | wfCctOptsShapedQHighWaterPkts | 0 | 0 | Frame Relay Traffic Shaping Queue high-water mark. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.44 | wfCctOptsShapedTotalOctets | 0 | 0 | Running total of Frame Relay Traffic Shaping octets transmitted. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.45 | wfCctOptsPpqDebugLevel | 0 | 0 | Protocol Priority Queueing Debug Level. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.46 | wfDequeueAtLineRate | 0 | 0 | Determines whether the dequeuing from the queues is to be done at the line rate instead of the conventional technique or not. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.47 | wfCctOptsMultiClassPPPQueueLimit | 0 | 0 | MultiClass PPP Priority Queue Limit. The minimum valid value is zero; no maximum valid value (limited by bufs for the slot). |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.48 | wfCctOptsMaxMultiClassPPPQueueLatency | 0 | 0 | MultiClass PPP Queue Latency. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.49 | wfCctOptsMultiClassPPPXmits | 0 | 0 | MultiClass PPP Queue Transmit count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.50 | wfCctOptsMultiClassPPPClippedPkts | 0 | 0 | MultiClass PPP Queue Transmit Clip count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.51 | wfCctOptsMultiClassPPPQHighWaterPkts | 0 | 0 | MultiClass PPP Queue high-water mark. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.52 | wfCctOptsMultiClassPPPTotalOctets | 0 | 0 | Running total of MultiClass PPP octets transmitted. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.53 | wfCctOptsMultiClassPPPQNonemptyCounter | 0 | 0 | Number of activations when the MultiClass PPP Queue already had packets from previous activations. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.54 | wfCctOptsMultiClassPPPTotalActivations | 0 | 0 | Total number of activations that had to deal with MultiClass PPP packets. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.55 | wfCctCircuitShapedHiQLength | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.56 | wfCctCircuitShapedNormalQLength | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.57 | wfCctCircuitShapedLoQLength | 0 | 0 | None |