Normal Priority Queue limit
The minimum valid value is zero.
no maximum valid value (limited by bufs for the slot)
Parsed from file cctopts.mib.txt
Company: None
Module: Wellfleet-CCTOPTS-MIB
Normal Priority Queue limit
The minimum valid value is zero.
The maximum valid value is 63 (HW xmit ring size)
minus the sum of the High and Low queue limits.
Parsed from file Wellfleet-Series7-MIB.mib
Module: Wellfleet-Series7-MIB
Vendor: Wellfleet
Module: Wellfleet-CCTOPTS-MIB
[Automatically extracted from oidview.com]
wfCctOptsNormalPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION "Normal Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot)" DEFVAL { default } ::= { wfCctOptsEntry 5 }
wfCctOptsNormalPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION " Normal Priority Queue limit The minimum valid value is zero. The maximum valid value is 63 (HW xmit ring size) minus the sum of the High and Low queue limits. " DEFVAL { default } ::= { wfCctOptsEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.4.1.1.1 | wfCctOptsDelete | 0 | 0 | Creation and deletion flag for this record |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.2 | wfCctOptsPriorityQueueingDisable | 0 | 0 | Priority Queuing option |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.3 | wfCctOptsCct | 0 | 0 | circuit number |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.4 | wfCctOptsHighPriorityQueueLimit | 0 | 0 | High Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.6 | wfCctOptsLowPriorityQueueLimit | 0 | 0 | Low Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.7 | wfCctOptsMaxInterruptQueueLatency | 0 | 0 | Interrupt Queue Latency |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.8 | wfCctOptsMaxHighPriorityQueueLatency | 0 | 0 | High Priority Queue Latency |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.9 | wfCctOptsHiXmits | 0 | 0 | High Priority Transmit count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.10 | wfCctOptsNormalXmits | 0 | 0 | Normal Priority Transmit count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.11 | wfCctOptsLoXmits | 0 | 0 | Low Priority Transmit count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.12 | wfCctOptsHiClippedPkts | 0 | 0 | High Prio Transmit Clip Count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.13 | wfCctOptsNormalClippedPkts | 0 | 0 | Normal Prio Transmit Clip Count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.14 | wfCctOptsLoClippedPkts | 0 | 0 | Low Prio Transmit Clip Count |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.15 | wfCctOptsIntrQHighWaterPkts | 0 | 0 | Interrupt Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.16 | wfCctOptsHiQHighWaterPkts | 0 | 0 | High-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.17 | wfCctOptsNormalQHighWaterPkts | 0 | 0 | Normal Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.18 | wfCctOptsLoQHighWaterPkts | 0 | 0 | Low-priority Queue high-water mark |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.19 | wfCctOptsHighWaterPktsClear | 0 | 0 | Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.20 | wfCctOptsDroppedPkts | 0 | 0 | Packets which were filtered in Priority Queueing |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.21 | wfCctOptsLargePkts | 0 | 0 | Large Packets which became an exception to latency rules |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.22 | wfCctOptsRxPkts | 0 | 0 | Packets received |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.23 | wfCctOptsChooserType | 0 | 0 | Algorithm to choose line within a multiline circuit |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.24 | wfCctOptsPqDequeueAlgType | 0 | 0 | Selection of Priority Queueing dequeueing algorithm PQ_STRICT_PRIORITIZATION is 'classical' 7.50 dequeueing. PQ_BANDWIDTH_ALLOCAT… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.25 | wfCctOptsHiPercent | 0 | 0 | This is the percent of the SYNC line bandwidth that the network manager wishes to allocate to traffic which has been configured t… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.26 | wfCctOptsNormalPercent | 0 | 0 | The minimum percent of the SYNC line that Normal-priority traffic will get (if there is any) when the Bandwidth Allocation featur… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.27 | wfCctOptsLoPercent | 0 | 0 | The minimum percent of the SYNC line that Low-priority traffic will get (if there is any) when the Bandwidth Allocation feature i… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.28 | wfCctOptsHiTotalOctets | 0 | 0 | Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.29 | wfCctOptsNormalTotalOctets | 0 | 0 | Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.30 | wfCctOptsLoTotalOctets | 0 | 0 | Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.31 | wfCctOptsCircuitType | 0 | 0 | Circuit Type Attribute |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.32 | wfCctOptsBackupCct | 0 | 0 | backup circuit number |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.33 | wfCctOptsPrimaryCctWanProtocolType | 0 | 0 | The type of WAN protocol type which is running on the primary line. This attribute is only read when a dial backup circuit is usi… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.34 | wfCctOptsMacFilterFormat | 0 | 0 | Used to force the Mac src/dst address to be matched in Token Ring format. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.35 | wfCctOptsPktsNotQueued | 0 | 0 | Packets that were not Queued or Dropped by Priority Queuing |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.36 | wfCctOptsBitsShiftCount | 0 | 0 | Used to shift src/dst address to the right when addressed based chooser is set. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.37 | wfCctOptsFrSetDeLowQ | 0 | 0 | Used on Frame Relay interfaces, allows Set of DE ( Discard Eligible ) bit of packets that end up in PQ's Low Queue, the Default i… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.38 | wfCctOptsFrSetDeNormQ | 0 | 0 | Used on Frame Relay interfaces, allows Set of DE ( Discard Eligible ) bit of packets that end up in PQ's Normal Queue, the Defaul… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.39 | wfCctOptsShapedPriorityQueueLimit | 0 | 0 | Frame Relay Traffic Shaping Priority Queue Limit. the minimum valid value is zerom no maximum valid value (limited by bufs for th… |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.40 | wfCctOptsMaxShapedPriorityQueueLatency | 0 | 0 | Frame Relay Traffic Shaping Priority Queue Latency. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.41 | wfCctOptsShapedXmits | 0 | 0 | Frame Relay Traffic Shaping Priority Transmit count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.42 | wfCctOptsShapedClippedPkts | 0 | 0 | Frame Relay Traffic Shaping Transmit Clip count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.43 | wfCctOptsShapedQHighWaterPkts | 0 | 0 | Frame Relay Traffic Shaping Queue high-water mark. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.44 | wfCctOptsShapedTotalOctets | 0 | 0 | Running total of Frame Relay Traffic Shaping octets transmitted. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.45 | wfCctOptsPpqDebugLevel | 0 | 0 | Protocol Priority Queueing Debug Level. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.46 | wfDequeueAtLineRate | 0 | 0 | Determines whether the dequeuing from the queues is to be done at the line rate instead of the conventional technique or not. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.47 | wfCctOptsMultiClassPPPQueueLimit | 0 | 0 | MultiClass PPP Priority Queue Limit. The minimum valid value is zero; no maximum valid value (limited by bufs for the slot). |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.48 | wfCctOptsMaxMultiClassPPPQueueLatency | 0 | 0 | MultiClass PPP Queue Latency. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.49 | wfCctOptsMultiClassPPPXmits | 0 | 0 | MultiClass PPP Queue Transmit count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.50 | wfCctOptsMultiClassPPPClippedPkts | 0 | 0 | MultiClass PPP Queue Transmit Clip count. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.51 | wfCctOptsMultiClassPPPQHighWaterPkts | 0 | 0 | MultiClass PPP Queue high-water mark. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.52 | wfCctOptsMultiClassPPPTotalOctets | 0 | 0 | Running total of MultiClass PPP octets transmitted. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.53 | wfCctOptsMultiClassPPPQNonemptyCounter | 0 | 0 | Number of activations when the MultiClass PPP Queue already had packets from previous activations. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.54 | wfCctOptsMultiClassPPPTotalActivations | 0 | 0 | Total number of activations that had to deal with MultiClass PPP packets. |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.55 | wfCctCircuitShapedHiQLength | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.56 | wfCctCircuitShapedNormalQLength | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.5.1.4.1.1.57 | wfCctCircuitShapedLoQLength | 0 | 0 | None |