Secret used for running CHAP when this cct is active.
The peer must use the same secret when responding to our
Challenges, which will be found in the Whoami Table
Parsed from file cctopts.mib.txt
Company: None
Module: Wellfleet-CCTOPTS-MIB
Secret used for running CHAP when this cct is active.
The peer must use the same secret when responding to our
Challenges, which will be found in the Whoami Table
Parsed from file Wellfleet-CCTOPTS-MIB.mib
Module: Wellfleet-CCTOPTS-MIB
Vendor: Wellfleet
Module: Wellfleet-CCTOPTS-MIB
[Automatically extracted from oidview.com]
wfSwservOptsChapSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Secret used for running CHAP when this cct is active. The peer must use the same secret when responding to our Challenges, which will be found in the Whoami Table" ::= { wfSwservOptsEntry 32 }
wfSwservOptsChapSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Secret used for running CHAP when this cct is active. The peer must use the same secret when responding to our Challenges, which will be found in the Whoami Table" ::= { wfSwservOptsEntry 32 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.4.5.1.1 | wfSwservOptsDelete | 0 | 0 | Creation and deletion flag |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.2 | wfSwservOptsCct | 0 | 0 | Circuit Number |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.3 | wfSwservOptsCircuitType | 0 | 0 | Circuit Type Attribute |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.4 | wfSwservOptsBackupCct | 0 | 0 | Backup Circuit Number assigned by site manager |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.5 | wfSwservOptsBackupPool | 0 | 0 | Backup Pool Id |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.6 | wfSwservOptsDemandPool | 0 | 0 | Dial on Demand Pool Id |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.7 | wfSwservOptsBackupMode | 0 | 0 | Mode Master ( initiate dialing ) or Slave |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.8 | wfSwservOptsActiveBackupCct | 0 | 0 | Active Backup Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.9 | wfSwservOptsForcedDial | 0 | 0 | Forced Dial Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.10 | wfSwservOptsMaxUpTime | 0 | 0 | Max amount fo time dial call can exist |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.11 | wfSwservOptsBringUpHour | 0 | 0 | Time of day hour to allow a line to dial |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.12 | wfSwservOptsBringUpMinute | 0 | 0 | Time of day minute to allow a line to dial |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.13 | wfSwservOptsTakeDownHour | 0 | 0 | Time of day hour to take down a dial line |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.14 | wfSwservOptsTakeDownMinute | 0 | 0 | Time of day minute to take down a dial line |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.15 | wfSwservOptsInactivityTime | 0 | 0 | Maximum for inactivity timer is equal to infinity = 99999999 |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.16 | wfSwservOptsCircuitState | 0 | 0 | Circuit State |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.17 | wfSwservOptsPrimaryDownTime | 0 | 0 | Amount of time allowed for establishment of primary before the backup is invoked |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.18 | wfSwservOptsNumOutgoingConn | 0 | 0 | Number of Outgoing call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.19 | wfSwservOptsNumIncomingConn | 0 | 0 | Number of Incoming call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.20 | wfSwservOptsActiveSlot | 0 | 0 | Slot actively in use by this call |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.21 | wfSwservOptsActiveLine | 0 | 0 | Line actively in use by this call |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.22 | wfSwservOptsPacketsDropped | 0 | 0 | Number of Incoming call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.23 | wfSwservOptsTimeLastPktDropped | 0 | 0 | Number of Incoming call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.24 | wfSwservOptsForcedTakedown | 0 | 0 | Forced Dial Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.25 | wfSwservOptsRetryMax | 0 | 0 | Redial count |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.26 | wfSwservOptsRetryCount | 0 | 0 | Redial count |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.27 | wfSwservOptsRetryDelay | 0 | 0 | delay to wait after retrys fails. value is in seconds |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.28 | wfSwservOptsDemandConnectionMode | 0 | 0 | Mode Master - outgoing call has precedence terminate incoming call Slave - incoming call has precedence terminate outgoing call NO_… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.29 | wfSwservOptsAutoDemandTermination | 0 | 0 | Automatically terminates demand circuit if maximum connect attempts reached |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.30 | wfSwservOptsAutoDemandTermReset | 0 | 0 | Amount of time ( in Minutes )before atttempting to recreate the demand circuit after an auto termination |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.31 | wfSwservOptsChapLocalName | 0 | 0 | This attribute is used to assign a local CHAP Name to outbound calls to to inform our peer of our identity, during WHOAMI process… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.33 | wfSwservOptsMaxUpTermination | 0 | 0 | Automatically terminates demand circuit if maximum connect attempts reached |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.34 | wfSwservOptsMaxUpTermReset | 0 | 0 | Amount of time ( in Minutes )before atttempting to recreate the demand circuit after an auto termination |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.35 | wfSwservOptsBandwidthPool | 0 | 0 | Bandwidth on Demand Pool Id |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.36 | wfSwservOptsBandwidthMode | 0 | 0 | Bandwidth Mode Monitor (Congestion Monitor) or NORMAL |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.37 | wfSwservOptsPapId | 0 | 0 | This attribute is used to assign a local PAP Id to outbound calls to to inform our peer of our identity, during WHOAMI processing |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.38 | wfSwservOptsPapPassword | 0 | 0 | This attribute is used to assign a local PAP Password to outbound calls to to inform our peer of our identity, during WHOAMI proc… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.39 | wfSwservOptsDebugMsgLevel | 0 | 0 | This attribute is used to assign the level of Swserv Debug message to be logged for the circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.40 | wfSwservOptsDmdCctGroupNum | 0 | 0 | Backup Circuit Number assigned by site manager |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.41 | wfSwservOptsWanProtocol | 0 | 0 | Wan Protocol for this circuit assigned by site manager. Used by BNX Software to Support ISDN Switched access to Frame Relay Switc… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.42 | wfSwservOptsSecondaryCct | 0 | 0 | Secondary circuit to be used by Line Manager when creating a backup for this primary circuit. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.43 | wfSwservOptsPoolLineNumber | 0 | 0 | Pooling line number used for identifying Frame Relay backup interface objects associated with a pool. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.44 | wfSwservOptsPoolLineIndex | 0 | 0 | Lower layer index used for identifying Frame Relay backup interface objects associated with a pool. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.45 | wfSwservOptsMinDuration | 0 | 0 | Maximum for min duration timer in seconds is equal to infinity = 99999999, min is 10 |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.46 | wfSwservOptsInactivityMode | 0 | 0 | Inactivity check mode |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.47 | wfSwservOptsOpportunityRouting | 0 | 0 | OpportunityRouting Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.48 | wfSwservOptsOutboundAuth | 0 | 0 | Allows the disabling of Authentication when the router is placing an outbound call. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.49 | wfSwservOptsOverSubRetryTimer | 0 | 0 | This parameter allows the user to cofigure the time period at which a connection will be retried, if a previous connection attem… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.50 | wfSwservOptsStandbyMode | 0 | 0 | This parameter allows a demand circuit to be identified as standby or demand. The hot standby circuit is down until an event inv… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.51 | wfSwservOptsStandbyFailBackMode | 0 | 0 | This parameter is used to indicate if standby failback should be automatic or manual. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.52 | wfSwservOptsManualStandbyAction | 0 | 0 | This parameter is used to manually activate and deactivate a standby circuit. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.53 | wfSwservOptsCallbackMode | 0 | 0 | Defines the role this circuit will play in Callback. INACTIVE disables Callback on this circuit. SERVER performs Callback via Out… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.54 | wfSwservOptsCallbackServerDelay | 0 | 0 | The amount of time the CALLBACK_SERVER will wait, (in seconds) before performing Callback,dialing back the initial caller. The de… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.55 | wfSwservOptsCallbackClientDelay | 0 | 0 | The amount of time the CALLBACK_CLIENT will wait, (in seconds) for its peer to perform Callback. Data ariving during opperation o… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.56 | wfSwservOptsQueueSize | 0 | 0 | This parameter controls the length of the queue used for dial services. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.57 | wfSwservOptsDequeueWaitTimer | 0 | 0 | This parameter controls the time FR waits before dequeuing data for FRDOD. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.58 | wfSwservOptsMru | 0 | 0 | This is the MRU being used for this demand circuit. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.59 | wfSwservOptsRfc1661Compliance | 0 | 0 | Enable/disable RFC 1661 compliance |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.60 | wfSwservOptsBootupDelay | 0 | 0 | Delay in initiation of the DoD circuit at bootup time |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.61 | wfSwservOptsCallbackOptRfc1570 | 0 | 0 | The PPP/LCP Callback Option; indicates the type of data content the callback client places in wfSwservOptsCallbackDataRfc1570 for… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.62 | wfSwservOptsCallbackDataRfc1570 | 0 | 0 | The PPP/LCP Callback Data; the actual callback client data which is sent to the callback server for processing |