Wan Protocol for this circuit assigned by site manager.
Used by BNX Software to Support ISDN Switched access
to Frame Relay Switch Network.
Parsed from file cctopts.mib.txt
Company: None
Module: Wellfleet-CCTOPTS-MIB
Wan Protocol for this circuit assigned by site manager.
Used by BNX Software to Support ISDN Switched access
to Frame Relay Switch Network.
Parsed from file Wellfleet-CCTOPTS-MIB.mib
Module: Wellfleet-CCTOPTS-MIB
Vendor: Wellfleet
Module: Wellfleet-CCTOPTS-MIB
[Automatically extracted from oidview.com]
wfSwservOptsWanProtocol OBJECT-TYPE SYNTAX INTEGER { unknown(1), ppp(2), fr(3), frswitch(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Wan Protocol for this circuit assigned by site manager. Used by BNX Software to Support ISDN Switched access to Frame Relay Switch Network." DEFVAL { ppp } ::= { wfSwservOptsEntry 41 }
wfSwservOptsWanProtocol OBJECT-TYPE SYNTAX INTEGER { unknown(1), ppp(2), fr(3), frswitch(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Wan Protocol for this circuit assigned by site manager. Used by BNX Software to Support ISDN Switched access to Frame Relay Switch Network." DEFVAL { ppp } ::= { wfSwservOptsEntry 41 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.4.5.1.1 | wfSwservOptsDelete | 0 | 0 | Creation and deletion flag |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.2 | wfSwservOptsCct | 0 | 0 | Circuit Number |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.3 | wfSwservOptsCircuitType | 0 | 0 | Circuit Type Attribute |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.4 | wfSwservOptsBackupCct | 0 | 0 | Backup Circuit Number assigned by site manager |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.5 | wfSwservOptsBackupPool | 0 | 0 | Backup Pool Id |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.6 | wfSwservOptsDemandPool | 0 | 0 | Dial on Demand Pool Id |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.7 | wfSwservOptsBackupMode | 0 | 0 | Mode Master ( initiate dialing ) or Slave |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.8 | wfSwservOptsActiveBackupCct | 0 | 0 | Active Backup Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.9 | wfSwservOptsForcedDial | 0 | 0 | Forced Dial Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.10 | wfSwservOptsMaxUpTime | 0 | 0 | Max amount fo time dial call can exist |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.11 | wfSwservOptsBringUpHour | 0 | 0 | Time of day hour to allow a line to dial |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.12 | wfSwservOptsBringUpMinute | 0 | 0 | Time of day minute to allow a line to dial |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.13 | wfSwservOptsTakeDownHour | 0 | 0 | Time of day hour to take down a dial line |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.14 | wfSwservOptsTakeDownMinute | 0 | 0 | Time of day minute to take down a dial line |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.15 | wfSwservOptsInactivityTime | 0 | 0 | Maximum for inactivity timer is equal to infinity = 99999999 |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.16 | wfSwservOptsCircuitState | 0 | 0 | Circuit State |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.17 | wfSwservOptsPrimaryDownTime | 0 | 0 | Amount of time allowed for establishment of primary before the backup is invoked |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.18 | wfSwservOptsNumOutgoingConn | 0 | 0 | Number of Outgoing call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.19 | wfSwservOptsNumIncomingConn | 0 | 0 | Number of Incoming call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.20 | wfSwservOptsActiveSlot | 0 | 0 | Slot actively in use by this call |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.21 | wfSwservOptsActiveLine | 0 | 0 | Line actively in use by this call |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.22 | wfSwservOptsPacketsDropped | 0 | 0 | Number of Incoming call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.23 | wfSwservOptsTimeLastPktDropped | 0 | 0 | Number of Incoming call attempts for this circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.24 | wfSwservOptsForcedTakedown | 0 | 0 | Forced Dial Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.25 | wfSwservOptsRetryMax | 0 | 0 | Redial count |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.26 | wfSwservOptsRetryCount | 0 | 0 | Redial count |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.27 | wfSwservOptsRetryDelay | 0 | 0 | delay to wait after retrys fails. value is in seconds |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.28 | wfSwservOptsDemandConnectionMode | 0 | 0 | Mode Master - outgoing call has precedence terminate incoming call Slave - incoming call has precedence terminate outgoing call NO_… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.29 | wfSwservOptsAutoDemandTermination | 0 | 0 | Automatically terminates demand circuit if maximum connect attempts reached |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.30 | wfSwservOptsAutoDemandTermReset | 0 | 0 | Amount of time ( in Minutes )before atttempting to recreate the demand circuit after an auto termination |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.31 | wfSwservOptsChapLocalName | 0 | 0 | This attribute is used to assign a local CHAP Name to outbound calls to to inform our peer of our identity, during WHOAMI process… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.32 | wfSwservOptsChapSecret | 0 | 0 | Secret used for running CHAP when this cct is active. The peer must use the same secret when responding to our Challenges, which … |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.33 | wfSwservOptsMaxUpTermination | 0 | 0 | Automatically terminates demand circuit if maximum connect attempts reached |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.34 | wfSwservOptsMaxUpTermReset | 0 | 0 | Amount of time ( in Minutes )before atttempting to recreate the demand circuit after an auto termination |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.35 | wfSwservOptsBandwidthPool | 0 | 0 | Bandwidth on Demand Pool Id |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.36 | wfSwservOptsBandwidthMode | 0 | 0 | Bandwidth Mode Monitor (Congestion Monitor) or NORMAL |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.37 | wfSwservOptsPapId | 0 | 0 | This attribute is used to assign a local PAP Id to outbound calls to to inform our peer of our identity, during WHOAMI processing |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.38 | wfSwservOptsPapPassword | 0 | 0 | This attribute is used to assign a local PAP Password to outbound calls to to inform our peer of our identity, during WHOAMI proc… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.39 | wfSwservOptsDebugMsgLevel | 0 | 0 | This attribute is used to assign the level of Swserv Debug message to be logged for the circuit |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.40 | wfSwservOptsDmdCctGroupNum | 0 | 0 | Backup Circuit Number assigned by site manager |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.42 | wfSwservOptsSecondaryCct | 0 | 0 | Secondary circuit to be used by Line Manager when creating a backup for this primary circuit. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.43 | wfSwservOptsPoolLineNumber | 0 | 0 | Pooling line number used for identifying Frame Relay backup interface objects associated with a pool. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.44 | wfSwservOptsPoolLineIndex | 0 | 0 | Lower layer index used for identifying Frame Relay backup interface objects associated with a pool. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.45 | wfSwservOptsMinDuration | 0 | 0 | Maximum for min duration timer in seconds is equal to infinity = 99999999, min is 10 |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.46 | wfSwservOptsInactivityMode | 0 | 0 | Inactivity check mode |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.47 | wfSwservOptsOpportunityRouting | 0 | 0 | OpportunityRouting Indicator |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.48 | wfSwservOptsOutboundAuth | 0 | 0 | Allows the disabling of Authentication when the router is placing an outbound call. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.49 | wfSwservOptsOverSubRetryTimer | 0 | 0 | This parameter allows the user to cofigure the time period at which a connection will be retried, if a previous connection attem… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.50 | wfSwservOptsStandbyMode | 0 | 0 | This parameter allows a demand circuit to be identified as standby or demand. The hot standby circuit is down until an event inv… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.51 | wfSwservOptsStandbyFailBackMode | 0 | 0 | This parameter is used to indicate if standby failback should be automatic or manual. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.52 | wfSwservOptsManualStandbyAction | 0 | 0 | This parameter is used to manually activate and deactivate a standby circuit. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.53 | wfSwservOptsCallbackMode | 0 | 0 | Defines the role this circuit will play in Callback. INACTIVE disables Callback on this circuit. SERVER performs Callback via Out… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.54 | wfSwservOptsCallbackServerDelay | 0 | 0 | The amount of time the CALLBACK_SERVER will wait, (in seconds) before performing Callback,dialing back the initial caller. The de… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.55 | wfSwservOptsCallbackClientDelay | 0 | 0 | The amount of time the CALLBACK_CLIENT will wait, (in seconds) for its peer to perform Callback. Data ariving during opperation o… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.56 | wfSwservOptsQueueSize | 0 | 0 | This parameter controls the length of the queue used for dial services. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.57 | wfSwservOptsDequeueWaitTimer | 0 | 0 | This parameter controls the time FR waits before dequeuing data for FRDOD. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.58 | wfSwservOptsMru | 0 | 0 | This is the MRU being used for this demand circuit. |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.59 | wfSwservOptsRfc1661Compliance | 0 | 0 | Enable/disable RFC 1661 compliance |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.60 | wfSwservOptsBootupDelay | 0 | 0 | Delay in initiation of the DoD circuit at bootup time |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.61 | wfSwservOptsCallbackOptRfc1570 | 0 | 0 | The PPP/LCP Callback Option; indicates the type of data content the callback client places in wfSwservOptsCallbackDataRfc1570 for… |
| 1.3.6.1.4.1.18.3.5.1.4.5.1.62 | wfSwservOptsCallbackDataRfc1570 | 0 | 0 | The PPP/LCP Callback Data; the actual callback client data which is sent to the callback server for processing |