XID passthru Enable/Disable parameter. Default is enabled.
Used for pu2.1 circuits to allow the XID to be passed thru to SDLC
when host is connected to token ring and remote is SDLC.
Parsed from file dls.mib.txt
Company: None
Module: Wellfleet-DLS-MIB
XID passthru Enable/Disable parameter. Default is enabled.
Used for pu2.1 circuits to allow the XID to be passed thru to SDLC
when host is connected to token ring and remote is SDLC.
Parsed from file Wellfleet-DLS-MIB.mib
Module: Wellfleet-DLS-MIB
Vendor: Wellfleet
Module: Wellfleet-DLS-MIB
[Automatically extracted from oidview.com]
wfDlsLocalDeviceEnableXidPassthru OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "XID passthru Enable/Disable parameter. Default is enabled. Used for pu2.1 circuits to allow the XID to be passed thru to SDLC when host is connected to token ring and remote is SDLC." DEFVAL { disabled } ::= { wfDlsLocalDeviceEntry 19 }
wfDlsLocalDeviceEnableXidPassthru OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "XID passthru Enable/Disable parameter. Default is enabled. Used for pu2.1 circuits to allow the XID to be passed thru to SDLC when host is connected to token ring and remote is SDLC." DEFVAL { disabled } ::= { wfDlsLocalDeviceEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.5.12.1.1 | wfDlsLocalDeviceDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.2 | wfDlsLocalDeviceDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable a DL… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.3 | wfDlsLocalDeviceState | 0 | 0 | The current state of DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.4 | wfDlsLocalDeviceCct | 0 | 0 | The circuit on which this device is configured. Valid range (1-1023) |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.5 | wfDlsLocalDeviceAddr | 0 | 0 | The physical address for this device. Valid range is based on media |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.6 | wfDlsLocalDeviceSourceMac | 0 | 0 | The source MAC address of an emulated Token Ring end station for this device. Values are standard MSB Token Ring MAC addresses |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.7 | wfDlsLocalDeviceSourceSap | 0 | 0 | The source SAP of an emulated Token Ring end station for this device. Values are standard SNA SAPs |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.8 | wfDlsLocalDeviceDestMac | 0 | 0 | The destination MAC address for this device. Values are standard MSB Token Ring MAC addresses |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.9 | wfDlsLocalDeviceDestSap | 0 | 0 | The destination SAP for this device. Values are standard SNA SAPs |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.10 | wfDlsLocalDeviceXidValue | 0 | 0 | The station XID value. Value must match the IDBLK and IDNUM on the host |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.11 | wfDlsLocalDeviceCanureachTimer | 0 | 0 | wfDlsLocalDeviceCanureachtimer |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.12 | wfDlsLocalDeviceCanureachRetries | 0 | 0 | The maximum number of times a canureach is sent to the remote DLS peer to establish a session. A minimum value of 0 means that … |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.13 | wfDlsLocalDeviceLSTimer | 0 | 0 | The time interval in seconds that a connect request is sent to the local SDLC device to establish a session. A minimum value of… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.14 | wfDlsLocalDeviceLSRetries | 0 | 0 | The maximum number of times a connect request is sent to the local SDLC device to establish a session. A minimum value of 0 mea… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.15 | wfDlsLocalDeviceRcvCredit | 0 | 0 | Receive credit count. Maximum number of frames SDLC is allowed to send to DLS. A minimum value of 1 means that DLS will only ac… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.16 | wfDlsLocalDeviceTxCredit | 0 | 0 | Transmit credit count. Maximum number of frames DLS is allowed to send to SDLC. A minimum value of 1 means that DLS can only se… |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.17 | wfDlsLocalDeviceCurTimer2 | 0 | 0 | The time interval in seconds that a canureach is sent to the remote DLS peer to establish a session. A minimum value of 1 means … |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.18 | wfDlsLocalDeviceCurRetries2 | 0 | 0 | The maximum number of times a canureach is sent to the remote DLS peer to establish a session. A minimum value of 0 means that … |
| 1.3.6.1.4.1.18.3.5.1.5.12.1.20 | wfDlsLocalDeviceActivationSequence | 0 | 0 | Sequence of activation for SDLC PU2.0 fixed format primary devices. LocalDeviceFirst specifies that DLS establishes a connection… |