The maximum amount of time (in seconds) allowed for a
TCP connection to stay established to the backup DLSw
peer. If set to zero, this feature is disabled. Set
to anything greater than zero to enable the feature.
Parsed from file dls.mib.txt
Company: None
Module: Wellfleet-DLS-MIB
The maximum amount of time (in seconds) allowed for a
TCP connection to stay established to the backup DLSw
peer. If set to zero, this feature is disabled. Set
to anything greater than zero to enable the feature.
Parsed from file Wellfleet-DLS-MIB.mib
Module: Wellfleet-DLS-MIB
Vendor: Wellfleet
Module: Wellfleet-DLS-MIB
[Automatically extracted from oidview.com]
wfDlsPeerBackupMaxUpTime OBJECT-TYPE SYNTAX INTEGER(0..999999) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of time (in seconds) allowed for a TCP connection to stay established to the backup DLSw peer. If set to zero, this feature is disabled. Set to anything greater than zero to enable the feature." DEFVAL { 0 } ::= { wfDlsPeerEntry 13 }
wfDlsPeerBackupMaxUpTime OBJECT-TYPE SYNTAX INTEGER(0..999999) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of time (in seconds) allowed for a TCP connection to stay established to the backup DLSw peer. If set to zero, this feature is disabled. Set to anything greater than zero to enable the feature." DEFVAL { 0 } ::= { wfDlsPeerEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.5.5.1.1 | wfDlsPeerDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.2 | wfDlsPeerState | 0 | 0 | The current state of the TCP connection with this DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.3 | wfDlsPeerIpAddr | 0 | 0 | The IP address of the DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.4 | wfDlsPeerDefinedBy | 0 | 0 | The method by which this peer was defined |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.5 | wfDlsPeerPPriDisable | 0 | 0 | DLSw Protocol Priority enabled/disabled for this Peer. The default is to use the value specified in the DLS Base record (wfDlsPP… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.6 | wfDlsPeerPPriMaxQBuf | 0 | 0 | Protocol Priority Queue Maximum number of allocated buffers queued. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.7 | wfDlsPeerPPriMaxQSize | 0 | 0 | Protocol Priority Queue Maximum number of octets queued. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.8 | wfDlsPeerPPriClearStats | 0 | 0 | Clear Protocol Priority Statistics. If prioritization is enabled for this Peer, then modifying this attribute will cause all Stat… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.9 | wfDlsPeerType | 0 | 0 | The protocol type of this DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.10 | wfDlsPeerTransportType | 0 | 0 | The transport type of this DLSw peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.11 | wfDlsPeerBackupConfig | 0 | 0 | The indication of whether or not a backup peer is to be configured for the primary peer. The default is no which means that ther… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.12 | wfDlsPeerBackupIpAddr | 0 | 0 | The IP Address of the backup DLSw peer. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.14 | wfDlsPeerBackupHoldDownTime | 0 | 0 | The amount of time (in seconds) to wait before starting a new TCP connection to the backup DLSw peer. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.15 | wfDlsPeerBackupStartTime | 0 | 0 | Used in conjunction with the EndTime attribute. Together these define a time interval for when a backup peer can be active. The… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.16 | wfDlsPeerBackupEndTime | 0 | 0 | Used in conjunction with the StartTime attribute. Together these define a time interval for when a backup peer can be active. T… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.17 | wfDlsPeerInteroperability | 0 | 0 | If enabled, open write to read tcp connection for 1434 and 1795 type of peers. Let the other side to open the other connection. |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.18 | wfDlsPeerBackupType | 0 | 0 | The type of this DLSw backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.19 | wfDlsPeerRsvpMode | 0 | 0 | Defines rsvp mode of operation for the peer: - 1 use rsvp parameters configured in the peer; - 2 do NOT use rsvp for this peer; - … |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.20 | wfDlsPeerRsvpSlots | 0 | 0 | Bit mask field representing the slots, that may make RSVP resevations for this peer. The MSBit represents slot 1, the next most s… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.21 | wfDlsPeerOutBandwidth | 0 | 0 | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.22 | wfDlsPeerOutBurstSize | 0 | 0 | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.23 | wfDlsPeerInBandwidth | 0 | 0 | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.24 | wfDlsPeerInBurstSize | 0 | 0 | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for this peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.25 | wfDlsPeerNonPeakOutBandwidth | 0 | 0 | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.26 | wfDlsPeerNonPeakOutBurstSize | 0 | 0 | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.27 | wfDlsPeerNonPeakInBandwidth | 0 | 0 | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.28 | wfDlsPeerNonPeakInBurstSize | 0 | 0 | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for this peer during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.29 | wfDlsPeerNonPeakStartTime | 0 | 0 | Start time of the non-peak hours in hhmm format and 24 hour clock. If start time is greater in value than end time, non-peak hour… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.30 | wfDlsPeerNonPeakEndTime | 0 | 0 | End time of the non-peak hours in hhmm 24 hour clock format |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.31 | wfDlsPeerNonPeakStartDays | 0 | 0 | Bitmap of the starting days of the week for a non-peak reservations. The MSBit represents Sunday, the next most significant bit re… |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.32 | wfDlsPeerBackupOutBandwidth | 0 | 0 | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.33 | wfDlsPeerBackupOutBurstSize | 0 | 0 | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.34 | wfDlsPeerBackupInBandwidth | 0 | 0 | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.35 | wfDlsPeerBackupInBurstSize | 0 | 0 | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for the backup peer |
| 1.3.6.1.4.1.18.3.5.1.5.5.1.36 | wfDlsPeerIsPrefered | 0 | 0 | Setting this MIB to 'yes' indicates that of all the dls peers defined, this peer is the prefered one to make connections to. Thi… |