The RR Turn-around timer is in milliseconds. It is the time
that DLC waits before turning the poll bit around when it has
no work to do.
Parsed from file sdlc.mib.txt
Company: None
Module: Wellfleet-SDLC-MIB
The RR Turn-around timer is in milliseconds. It is the time
that DLC waits before turning the poll bit around when it has
no work to do.
Parsed from file Wellfleet-SDLC-MIB.mib
Module: Wellfleet-SDLC-MIB
Vendor: Wellfleet
Module: Wellfleet-SDLC-MIB
[Automatically extracted from oidview.com]
wfSdlcLSAdminRRTimer OBJECT-TYPE SYNTAX INTEGER(0..64000) ACCESS read-write STATUS mandatory DESCRIPTION "The RR Turn-around timer is in milliseconds. It is the time that DLC waits before turning the poll bit around when it has no work to do." ::= { wfSdlcLSAdminEntry 28 }
wfSdlcLSAdminRRTimer OBJECT-TYPE SYNTAX INTEGER(0..64000) ACCESS read-write STATUS mandatory DESCRIPTION "The RR Turn-around timer is in milliseconds. It is the time that DLC waits before turning the poll bit around when it has no work to do." ::= { wfSdlcLSAdminEntry 28 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.7.5.1.1 | wfSdlcLSAdminDelete | 0 | 0 | Create/Delete Link Station |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.2 | wfSdlcLSAdminDisable | 0 | 0 | This object controls the desired state of the SDLC station. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.3 | wfSdlcLSAdminIfIndex | 0 | 0 | The ifIndex value for the SDLC port which owns this link station. This is equivalent to the circuit number for this interface. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.4 | wfSdlcLSAdminAddress | 0 | 0 | This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station wi… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.5 | wfSdlcLSAdminGroupAddress | 0 | 0 | This value is the group poll address of the secondary link station for this SDLC link. If this link station is not part of a gro… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.6 | wfSdlcLSAdminRole | 0 | 0 | This object describes the role that the link station shall assume the next time a connection is established. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.7 | wfSdlcLSAdminMAXDATA | 0 | 0 | This object controls the maximum PDU size allowed for the logical link. This value includes the Transmission Header (TH) and Req… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.8 | wfSdlcLSAdminREPLYTO | 0 | 0 | This object controls the reply timeout, in tenths of seconds, (1....600) for an SDLC link station. If the link station does not r… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.9 | wfSdlcLSAdminMAXIN | 0 | 0 | This object controls the maximum number, (1.....127) of unacknowledged frames which an SDLC link station may receive. This will r… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.10 | wfSdlcLSAdminMAXOUT | 0 | 0 | This object controls the maximum consequetive unacknowledged frames, (1.....127) which an SDLC link station shall send without an… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.11 | wfSdlcLSAdminMODULO | 0 | 0 | This object controls the modulus, (8,128) for an SDLC link station. This modulus determines the size of the rotating acknowledgem… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.12 | wfSdlcLSAdminRETRIESm | 0 | 0 | This object controls number of retries, ( 1.....128) in a retry sequence for an SDLC link station. A retry sequence is a series … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.13 | wfSdlcLSAdminRETRIESt | 0 | 0 | This object controls the interval, in seconds, (0....255) between retry sequences for an SDLC link station if multiple retry seq… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.14 | wfSdlcLSAdminRETRIESn | 0 | 0 | This object controls the number of times, (1....127) that a retry sequence is repeated for an SDLC link station. A retry sequenc… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.15 | wfSdlcLSAdminRNRLIMIT | 0 | 0 | This object controls the length of time, in minutes, (1.....90) that an SDLC link station will allow its adjacent link station t… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.16 | wfSdlcLSAdminContTimer | 0 | 0 | This object controls the timeout required before a SNRM or XID is retransmitted in the event of non-acknowledgement. Used for Pri… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.17 | wfSdlcLSAdminContTimerRetry | 0 | 0 | This object controls the number of times transmission and retransmission of a contact frame (e.g. SNRM) is allowed before switchi… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.18 | wfSdlcLSAdminContTimer2 | 0 | 0 | This object controls the slow poll contact timer in milliseconds. When the contact timer retry count expires, polling will conti… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.19 | wfSdlcLSAdminContTimer2Retry | 0 | 0 | This object controls the number of times transmission and retransmission of a contact frame (e.g. SNRM) is allowed before an outa… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.20 | wfSdlcLSAdminDiscTimer | 0 | 0 | This object controls the time in milliseconds before a DISC is retransmitted in the event of non-acknowledgement (for primary SDL… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.21 | wfSdlcLSAdminDiscTimerRetry | 0 | 0 | This object controls the number of times transmission and retransmission of a DISC is allowed. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.22 | wfSdlcLSAdminNvePollTimer | 0 | 0 | This object controls the timeout required before an adjacent secondary station is re-inserted into the polling list after being r… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.23 | wfSdlcLSAdminNvePollTimerRetry | 0 | 0 | This object controls the number of times a station is removed from the polling list on the normal poll timer before switching to … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.24 | wfSdlcLSAdminNvePollTimer2 | 0 | 0 | The slow negative poll timer in milliseconds. When the negative poll timer count expires, the poll will continue by using this ti… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.25 | wfSdlcLSAdminNvePollTimer2Retry | 0 | 0 | This object controls the number of times a station is removed from the polling list before an outage message is sent to a client. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.26 | wfSdlcLSAdminNoRespTimerRetry | 0 | 0 | This object controls the number of times an adjacent secondary station is seen to fail to respond before an outage message is se… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.27 | wfSdlcLSAdminRemBusyTimerRetry | 0 | 0 | The Remote busy retry limit value is user with the timeout value to provide the overall timeout before an outage message is sent … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.29 | wfSdlcLSAdminGpAddName | 0 | 0 | The address of the group to which this link station belongs. This object is only used in association with group polling. It is 4 … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.30 | wfSdlcLSAdminPollFrame | 0 | 0 | The frame to use for pre-activation polling. This is normally set to XID to show that polling is in the control of the DLC user. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.31 | wfSdlcLSAdminPollOnIframe | 0 | 0 | Flag whether this link station is permitted to send the poll bit on an I-frame. Certain SDLC implementations do not handle recei… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.32 | wfSdlcLSAdminLinkStationName | 0 | 0 | The name of the adjacent link station in ASCII. Used for stats and Alert messages to uniquely identify the station. 8 BYTES in le… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.33 | wfSdlcLSAdminAdjNodeType | 0 | 0 | Adjacent Node type |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.34 | wfSdlcLSAdminSimRim | 0 | 0 | This object controls the support for transmission and receipt of SIM and RIM control frames for this link station. |