This object controls the reply timeout, in tenths of seconds,
(1....600) for an SDLC link station. If the link station does not
receive a repsonse to a poll or message before the specified time
expires then the appropriate error recovery shall be initiated. A
write operation to this administered value will not change the
operational value, wfSdlcLSOperREPLYTO, until the link station is
cycled inactive. This object has no meaning for secondary SDLC link
stations.
Parsed from file sdlc.mib.txt
Company: None
Module: Wellfleet-SDLC-MIB
This object controls the reply timeout, in tenths of seconds,
(1....600) for an SDLC link station. If the link station does not
receive a repsonse to a poll or message before the specified time
expires then the appropriate error recovery shall be initiated. A
write operation to this administered value will not change the
operational value, wfSdlcLSOperREPLYTO, until the link station is
cycled inactive. This object has no meaning for secondary SDLC link
stations.
Parsed from file Wellfleet-SDLC-MIB.mib
Module: Wellfleet-SDLC-MIB
Vendor: Wellfleet
Module: Wellfleet-SDLC-MIB
[Automatically extracted from oidview.com]
wfSdlcLSAdminREPLYTO OBJECT-TYPE SYNTAX INTEGER(1..600) ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the reply timeout, in tenths of seconds, (1....600) for an SDLC link station. If the link station does not receive a repsonse to a poll or message before the specified time expires then the appropriate error recovery shall be initiated. A write operation to this administered value will not change the operational value, wfSdlcLSOperREPLYTO, until the link station is cycled inactive. This object has no meaning for secondary SDLC link stations." DEFVAL { 30 } ::= { wfSdlcLSAdminEntry 8 }
wfSdlcLSAdminREPLYTO OBJECT-TYPE SYNTAX INTEGER(1..600) ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the reply timeout, in tenths of seconds, (1....600) for an SDLC link station. If the link station does not receive a repsonse to a poll or message before the specified time expires then the appropriate error recovery shall be initiated. A write operation to this administered value will not change the operational value, wfSdlcLSOperREPLYTO, until the link station is cycled inactive. This object has no meaning for secondary SDLC link stations." DEFVAL { 30 } ::= { wfSdlcLSAdminEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.7.5.1.1 | wfSdlcLSAdminDelete | 0 | 0 | Create/Delete Link Station |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.2 | wfSdlcLSAdminDisable | 0 | 0 | This object controls the desired state of the SDLC station. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.3 | wfSdlcLSAdminIfIndex | 0 | 0 | The ifIndex value for the SDLC port which owns this link station. This is equivalent to the circuit number for this interface. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.4 | wfSdlcLSAdminAddress | 0 | 0 | This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station wi… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.5 | wfSdlcLSAdminGroupAddress | 0 | 0 | This value is the group poll address of the secondary link station for this SDLC link. If this link station is not part of a gro… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.6 | wfSdlcLSAdminRole | 0 | 0 | This object describes the role that the link station shall assume the next time a connection is established. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.7 | wfSdlcLSAdminMAXDATA | 0 | 0 | This object controls the maximum PDU size allowed for the logical link. This value includes the Transmission Header (TH) and Req… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.9 | wfSdlcLSAdminMAXIN | 0 | 0 | This object controls the maximum number, (1.....127) of unacknowledged frames which an SDLC link station may receive. This will r… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.10 | wfSdlcLSAdminMAXOUT | 0 | 0 | This object controls the maximum consequetive unacknowledged frames, (1.....127) which an SDLC link station shall send without an… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.11 | wfSdlcLSAdminMODULO | 0 | 0 | This object controls the modulus, (8,128) for an SDLC link station. This modulus determines the size of the rotating acknowledgem… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.12 | wfSdlcLSAdminRETRIESm | 0 | 0 | This object controls number of retries, ( 1.....128) in a retry sequence for an SDLC link station. A retry sequence is a series … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.13 | wfSdlcLSAdminRETRIESt | 0 | 0 | This object controls the interval, in seconds, (0....255) between retry sequences for an SDLC link station if multiple retry seq… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.14 | wfSdlcLSAdminRETRIESn | 0 | 0 | This object controls the number of times, (1....127) that a retry sequence is repeated for an SDLC link station. A retry sequenc… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.15 | wfSdlcLSAdminRNRLIMIT | 0 | 0 | This object controls the length of time, in minutes, (1.....90) that an SDLC link station will allow its adjacent link station t… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.16 | wfSdlcLSAdminContTimer | 0 | 0 | This object controls the timeout required before a SNRM or XID is retransmitted in the event of non-acknowledgement. Used for Pri… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.17 | wfSdlcLSAdminContTimerRetry | 0 | 0 | This object controls the number of times transmission and retransmission of a contact frame (e.g. SNRM) is allowed before switchi… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.18 | wfSdlcLSAdminContTimer2 | 0 | 0 | This object controls the slow poll contact timer in milliseconds. When the contact timer retry count expires, polling will conti… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.19 | wfSdlcLSAdminContTimer2Retry | 0 | 0 | This object controls the number of times transmission and retransmission of a contact frame (e.g. SNRM) is allowed before an outa… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.20 | wfSdlcLSAdminDiscTimer | 0 | 0 | This object controls the time in milliseconds before a DISC is retransmitted in the event of non-acknowledgement (for primary SDL… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.21 | wfSdlcLSAdminDiscTimerRetry | 0 | 0 | This object controls the number of times transmission and retransmission of a DISC is allowed. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.22 | wfSdlcLSAdminNvePollTimer | 0 | 0 | This object controls the timeout required before an adjacent secondary station is re-inserted into the polling list after being r… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.23 | wfSdlcLSAdminNvePollTimerRetry | 0 | 0 | This object controls the number of times a station is removed from the polling list on the normal poll timer before switching to … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.24 | wfSdlcLSAdminNvePollTimer2 | 0 | 0 | The slow negative poll timer in milliseconds. When the negative poll timer count expires, the poll will continue by using this ti… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.25 | wfSdlcLSAdminNvePollTimer2Retry | 0 | 0 | This object controls the number of times a station is removed from the polling list before an outage message is sent to a client. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.26 | wfSdlcLSAdminNoRespTimerRetry | 0 | 0 | This object controls the number of times an adjacent secondary station is seen to fail to respond before an outage message is se… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.27 | wfSdlcLSAdminRemBusyTimerRetry | 0 | 0 | The Remote busy retry limit value is user with the timeout value to provide the overall timeout before an outage message is sent … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.28 | wfSdlcLSAdminRRTimer | 0 | 0 | The RR Turn-around timer is in milliseconds. It is the time that DLC waits before turning the poll bit around when it has no work… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.29 | wfSdlcLSAdminGpAddName | 0 | 0 | The address of the group to which this link station belongs. This object is only used in association with group polling. It is 4 … |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.30 | wfSdlcLSAdminPollFrame | 0 | 0 | The frame to use for pre-activation polling. This is normally set to XID to show that polling is in the control of the DLC user. |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.31 | wfSdlcLSAdminPollOnIframe | 0 | 0 | Flag whether this link station is permitted to send the poll bit on an I-frame. Certain SDLC implementations do not handle recei… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.32 | wfSdlcLSAdminLinkStationName | 0 | 0 | The name of the adjacent link station in ASCII. Used for stats and Alert messages to uniquely identify the station. 8 BYTES in le… |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.33 | wfSdlcLSAdminAdjNodeType | 0 | 0 | Adjacent Node type |
| 1.3.6.1.4.1.18.3.5.1.7.5.1.34 | wfSdlcLSAdminSimRim | 0 | 0 | This object controls the support for transmission and receipt of SIM and RIM control frames for this link station. |