An entry in the LAPB table
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
An entry in the LAPB table
Parsed from file Wellfleet-LAPB-MIB.mib
Module: Wellfleet-LAPB-MIB
Vendor: Wellfleet
Module: Wellfleet-LAPB-MIB
[Automatically extracted from oidview.com]
wfLapbEntry OBJECT-TYPE SYNTAX WfLapbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in the LAPB table " INDEX { wfLapbLineNumber, wfLapbLLIndex } ::= { wfLapbTable 1 }
wfLapbEntry OBJECT-TYPE SYNTAX WfLapbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the LAPB table" INDEX { wfLapbLineNumber, wfLapbLLIndex } ::= { wfLapbTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.8.1.1 | wfLapbDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.1.8.1.2 | wfLapbDisable | 0 | 0 | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.5.1.8.1.3 | wfLapbState | 0 | 0 | Line Driver state variable, Not Present, DSR Wait, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.1.8.1.4 | wfLapbLineNumber | 0 | 0 | Instance identifier, Line Number, filled in by LAPB |
| 1.3.6.1.4.1.18.3.5.1.8.1.5 | wfLapbLLIndex | 0 | 0 | Instance identifier, Lower Layer Index, filled in by LAPB |
| 1.3.6.1.4.1.18.3.5.1.8.1.6 | wfLapbCct | 0 | 0 | CCT number for this LAPB subsystem, it is associated with the driver or application running underneath it. |
| 1.3.6.1.4.1.18.3.5.1.8.1.7 | wfLapbStationType | 0 | 0 | Identifies the desired station type of this interface. A value of DxE indicates XID enabled but not negotiation has not yet taken… |
| 1.3.6.1.4.1.18.3.5.1.8.1.8 | wfLapbControlField | 0 | 0 | This parameter establishes the desired size of the sequence numbers used to number frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.9 | wfLapbN1FrameSize | 0 | 0 | The default maximum N1 frame size desired in number of bytes for a frame transmitted by the DxE. This excludes flags and 0 bits … |
| 1.3.6.1.4.1.18.3.5.1.8.1.10 | wfLapbKWindowSize | 0 | 0 | The default transmit and receive window size for this Interface. This is the maximum number of unacknowledged sequence frames th… |
| 1.3.6.1.4.1.18.3.5.1.8.1.11 | wfLapbN2RxmitCount | 0 | 0 | The default N2 retry count indicates the number of retransmission attempts which will be tried per frame before a line is determ… |
| 1.3.6.1.4.1.18.3.5.1.8.1.12 | wfLapbT1AckTimer | 0 | 0 | The default T1 timer for this interface. This specifies the maximum time in seconds to wait for an acknowledgment of a frame. |
| 1.3.6.1.4.1.18.3.5.1.8.1.13 | wfLapbT2AckDelayTimer | 0 | 0 | The default T2 timer for this interface. This specifies the maximum time in seconds to wait before sending an acknowledgment for… |
| 1.3.6.1.4.1.18.3.5.1.8.1.14 | wfLapbT3DisconnectTimer | 0 | 0 | The T3 timer for this interface. This specifies the time in seconds to wait before considering the link disconnected. A value o… |
| 1.3.6.1.4.1.18.3.5.1.8.1.15 | wfLapbT4IdleTimer | 0 | 0 | The T4 timer for this interface. This specifies the maximum time in seconds to allow without frames being exchanged on the data … |
| 1.3.6.1.4.1.18.3.5.1.8.1.16 | wfLapbActionInitiate | 0 | 0 | This identifies the action LAPB will take to initiate link set-up. |
| 1.3.6.1.4.1.18.3.5.1.8.1.17 | wfLapbXidDisable | 0 | 0 | XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.18 | wfLapbCommandAddress | 0 | 0 | The local command address parameter contains the DTE or DCE value expressed as a single octet. |
| 1.3.6.1.4.1.18.3.5.1.8.1.19 | wfLapbResponseAddress | 0 | 0 | The local response address parameter contains the DTE or DCE value expressed as a single octet. |
| 1.3.6.1.4.1.18.3.5.1.8.1.20 | wfLapbWanProtocol | 0 | 0 | WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface. |
| 1.3.6.1.4.1.18.3.5.1.8.1.21 | wfLapbRxOctets | 0 | 0 | Number of octets received without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.22 | wfLapbRxFrames | 0 | 0 | Number of frames received without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.23 | wfLapbTxOctets | 0 | 0 | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.24 | wfLapbTxFrames | 0 | 0 | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.25 | wfLapbReXmits | 0 | 0 | Number of retransmission occurances |
| 1.3.6.1.4.1.18.3.5.1.8.1.26 | wfLapbRejectsTx | 0 | 0 | Number of reject frames which were transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.27 | wfLapbRejectsRx | 0 | 0 | Number of reject frames which were received |
| 1.3.6.1.4.1.18.3.5.1.8.1.28 | wfLapbFrameRejectsTx | 0 | 0 | Number of Frame Rejects transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.29 | wfLapbFrameRejectsRx | 0 | 0 | Number of Frame Rejects received |
| 1.3.6.1.4.1.18.3.5.1.8.1.30 | wfLapbRRsTx | 0 | 0 | Number of Receiver Ready frames transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.31 | wfLapbRRsRx | 0 | 0 | Number of Receiver Ready frames received |
| 1.3.6.1.4.1.18.3.5.1.8.1.32 | wfLapbRNRsTx | 0 | 0 | Number of Receiver Not Ready frames transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.33 | wfLapbRNRsRx | 0 | 0 | Number of Receiver Not Ready frames received |
| 1.3.6.1.4.1.18.3.5.1.8.1.34 | wfLapbResets | 0 | 0 | Number of Link Connection Resets |
| 1.3.6.1.4.1.18.3.5.1.8.1.35 | wfLapbNormalDisc | 0 | 0 | Number of normal link disconnections |
| 1.3.6.1.4.1.18.3.5.1.8.1.36 | wfLapbAbnormalDisc | 0 | 0 | Number of abnormal link disconnections |
| 1.3.6.1.4.1.18.3.5.1.8.1.37 | wfLapbSetupAllowed | 0 | 0 | Number of successful link connections |
| 1.3.6.1.4.1.18.3.5.1.8.1.38 | wfLapbSetupRefused | 0 | 0 | Number of unsuccessful link connections |
| 1.3.6.1.4.1.18.3.5.1.8.1.39 | wfLapbNetworkType | 0 | 0 | The types GOSIP and NET2 are used in conjunction with the X.25 network |
| 1.3.6.1.4.1.18.3.5.1.8.1.40 | wfLapbIdleRRFrames | 0 | 0 | XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.41 | wfLapbClientType | 0 | 0 | This parameter is used to describe the client above the LAPB protocol layer. By default, the client is the X.25 Packet layer. Cur… |
| 1.3.6.1.4.1.18.3.5.1.8.1.42 | wfLapbRetransmitTimer | 0 | 0 | The Retransmit timer for this interface. This specifies the maximum time in seconds to allow without retransmitting frames after … |