The T4 timer for this interface. This specifies the maximum time in
seconds to allow without frames being exchanged on the data link.
Not implemented for this project.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
The T4 timer for this interface. This specifies the maximum time in
seconds to allow without frames being exchanged on the data link.
Not implemented for this project.
Parsed from file Wellfleet-LAPB-MIB.mib
Module: Wellfleet-LAPB-MIB
Vendor: Wellfleet
Module: Wellfleet-LAPB-MIB
[Automatically extracted from oidview.com]
wfLapbT4IdleTimer OBJECT-TYPE SYNTAX INTEGER(1..9999) ACCESS read-write STATUS mandatory DESCRIPTION " The T4 timer for this interface. This specifies the maximum time in seconds to allow without frames being exchanged on the data link. Not implemented for this project. " DEFVAL { 1 } ::= { wfLapbEntry 15 }
wfLapbT4IdleTimer OBJECT-TYPE SYNTAX INTEGER(1..9999) ACCESS read-write STATUS mandatory DESCRIPTION "The T4 timer for this interface. This specifies the maximum time in seconds to allow without frames being exchanged on the data link. Not implemented for this project." DEFVAL { 1 } ::= { wfLapbEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.8.1.1 | wfLapbDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.1.8.1.2 | wfLapbDisable | 0 | 0 | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.5.1.8.1.3 | wfLapbState | 0 | 0 | Line Driver state variable, Not Present, DSR Wait, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.1.8.1.4 | wfLapbLineNumber | 0 | 0 | Instance identifier, Line Number, filled in by LAPB |
| 1.3.6.1.4.1.18.3.5.1.8.1.5 | wfLapbLLIndex | 0 | 0 | Instance identifier, Lower Layer Index, filled in by LAPB |
| 1.3.6.1.4.1.18.3.5.1.8.1.6 | wfLapbCct | 0 | 0 | CCT number for this LAPB subsystem, it is associated with the driver or application running underneath it. |
| 1.3.6.1.4.1.18.3.5.1.8.1.7 | wfLapbStationType | 0 | 0 | Identifies the desired station type of this interface. A value of DxE indicates XID enabled but not negotiation has not yet taken… |
| 1.3.6.1.4.1.18.3.5.1.8.1.8 | wfLapbControlField | 0 | 0 | This parameter establishes the desired size of the sequence numbers used to number frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.9 | wfLapbN1FrameSize | 0 | 0 | The default maximum N1 frame size desired in number of bytes for a frame transmitted by the DxE. This excludes flags and 0 bits … |
| 1.3.6.1.4.1.18.3.5.1.8.1.10 | wfLapbKWindowSize | 0 | 0 | The default transmit and receive window size for this Interface. This is the maximum number of unacknowledged sequence frames th… |
| 1.3.6.1.4.1.18.3.5.1.8.1.11 | wfLapbN2RxmitCount | 0 | 0 | The default N2 retry count indicates the number of retransmission attempts which will be tried per frame before a line is determ… |
| 1.3.6.1.4.1.18.3.5.1.8.1.12 | wfLapbT1AckTimer | 0 | 0 | The default T1 timer for this interface. This specifies the maximum time in seconds to wait for an acknowledgment of a frame. |
| 1.3.6.1.4.1.18.3.5.1.8.1.13 | wfLapbT2AckDelayTimer | 0 | 0 | The default T2 timer for this interface. This specifies the maximum time in seconds to wait before sending an acknowledgment for… |
| 1.3.6.1.4.1.18.3.5.1.8.1.14 | wfLapbT3DisconnectTimer | 0 | 0 | The T3 timer for this interface. This specifies the time in seconds to wait before considering the link disconnected. A value o… |
| 1.3.6.1.4.1.18.3.5.1.8.1.16 | wfLapbActionInitiate | 0 | 0 | This identifies the action LAPB will take to initiate link set-up. |
| 1.3.6.1.4.1.18.3.5.1.8.1.17 | wfLapbXidDisable | 0 | 0 | XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.18 | wfLapbCommandAddress | 0 | 0 | The local command address parameter contains the DTE or DCE value expressed as a single octet. |
| 1.3.6.1.4.1.18.3.5.1.8.1.19 | wfLapbResponseAddress | 0 | 0 | The local response address parameter contains the DTE or DCE value expressed as a single octet. |
| 1.3.6.1.4.1.18.3.5.1.8.1.20 | wfLapbWanProtocol | 0 | 0 | WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface. |
| 1.3.6.1.4.1.18.3.5.1.8.1.21 | wfLapbRxOctets | 0 | 0 | Number of octets received without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.22 | wfLapbRxFrames | 0 | 0 | Number of frames received without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.23 | wfLapbTxOctets | 0 | 0 | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.24 | wfLapbTxFrames | 0 | 0 | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.25 | wfLapbReXmits | 0 | 0 | Number of retransmission occurances |
| 1.3.6.1.4.1.18.3.5.1.8.1.26 | wfLapbRejectsTx | 0 | 0 | Number of reject frames which were transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.27 | wfLapbRejectsRx | 0 | 0 | Number of reject frames which were received |
| 1.3.6.1.4.1.18.3.5.1.8.1.28 | wfLapbFrameRejectsTx | 0 | 0 | Number of Frame Rejects transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.29 | wfLapbFrameRejectsRx | 0 | 0 | Number of Frame Rejects received |
| 1.3.6.1.4.1.18.3.5.1.8.1.30 | wfLapbRRsTx | 0 | 0 | Number of Receiver Ready frames transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.31 | wfLapbRRsRx | 0 | 0 | Number of Receiver Ready frames received |
| 1.3.6.1.4.1.18.3.5.1.8.1.32 | wfLapbRNRsTx | 0 | 0 | Number of Receiver Not Ready frames transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.33 | wfLapbRNRsRx | 0 | 0 | Number of Receiver Not Ready frames received |
| 1.3.6.1.4.1.18.3.5.1.8.1.34 | wfLapbResets | 0 | 0 | Number of Link Connection Resets |
| 1.3.6.1.4.1.18.3.5.1.8.1.35 | wfLapbNormalDisc | 0 | 0 | Number of normal link disconnections |
| 1.3.6.1.4.1.18.3.5.1.8.1.36 | wfLapbAbnormalDisc | 0 | 0 | Number of abnormal link disconnections |
| 1.3.6.1.4.1.18.3.5.1.8.1.37 | wfLapbSetupAllowed | 0 | 0 | Number of successful link connections |
| 1.3.6.1.4.1.18.3.5.1.8.1.38 | wfLapbSetupRefused | 0 | 0 | Number of unsuccessful link connections |
| 1.3.6.1.4.1.18.3.5.1.8.1.39 | wfLapbNetworkType | 0 | 0 | The types GOSIP and NET2 are used in conjunction with the X.25 network |
| 1.3.6.1.4.1.18.3.5.1.8.1.40 | wfLapbIdleRRFrames | 0 | 0 | XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.41 | wfLapbClientType | 0 | 0 | This parameter is used to describe the client above the LAPB protocol layer. By default, the client is the X.25 Packet layer. Cur… |
| 1.3.6.1.4.1.18.3.5.1.8.1.42 | wfLapbRetransmitTimer | 0 | 0 | The Retransmit timer for this interface. This specifies the maximum time in seconds to allow without retransmitting frames after … |