This specifies the maximum outbound link activation
limit for this Port. This value plus previous one must total
less than or equal to the total link activation limit.
Parsed from file appn.mib.txt
Company: None
Module: Wellfleet-APPN-MIB
This specifies the maximum outbound link activation
limit for this Port. This value plus previous one must total
less than or equal to the total link activation limit.
Parsed from file Wellfleet-APPN-MIB.mib
Module: Wellfleet-APPN-MIB
Vendor: Wellfleet
Module: Wellfleet-APPN-MIB
[Automatically extracted from oidview.com]
wfAppnNodePortOutLinkActLim OBJECT-TYPE SYNTAX INTEGER { switched(1), satf(128), pri(256) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the maximum outbound link activation limit for this Port. This value plus previous one must total less than or equal to the total link activation limit." DEFVAL { satf } ::= { wfAppnNodePortEntry 19 }
wfAppnNodePortOutLinkActLim OBJECT-TYPE SYNTAX INTEGER { switched(1), satf(128), pri(256) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies the maximum outbound link activation limit for this Port. This value plus previous one must total less than or equal to the total link activation limit." DEFVAL { satf } ::= { wfAppnNodePortEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.14.1.3.1.1 | wfAppnNodePortDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Port … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.2 | wfAppnNodePortDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.3 | wfAppnNodePortName | 0 | 0 | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.4 | wfAppnNodePortState | 0 | 0 | Indicates the current state of this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.5 | wfAppnNodePortDlcType | 0 | 0 | Indicates the DLC type of this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.6 | wfAppnNodePortPortType | 0 | 0 | Identifies the type of line used by this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.7 | wfAppnNodePortSIMRIM | 0 | 0 | Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.8 | wfAppnNodePortLsRole | 0 | 0 | Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.9 | wfAppnNodePortMaxRcvBtuSize | 0 | 0 | Maximum Basic Transmission Size (BTU) that a link station on this port can receive. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.10 | wfAppnNodePortMaxIframeWindow | 0 | 0 | Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.11 | wfAppnNodePortDefLsGoodXids | 0 | 0 | The total number of successful XIDs that have occurred on all defined link stations on this port since the last time this port wa… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.12 | wfAppnNodePortDefLsBadXids | 0 | 0 | The total number of unsuccessful XIDs that have occurred on all defined link stations on this port since the last time this port … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.13 | wfAppnNodePortDynLsGoodXids | 0 | 0 | The total number of successful XIDs that have occurred on all dynamic link stations on this port since the last time this port wa… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.14 | wfAppnNodePortDynLsBadXids | 0 | 0 | The total number of unsuccessful XIDs that have occurred on all dynamic link stations on this port since the last time this port … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.15 | wfAppnNodePortDlcName | 0 | 0 | This is the 8-character name of the DLC which supports this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.16 | wfAppnNodePortNumber | 0 | 0 | This is a unique number for this Port on the DLC |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.17 | wfAppnNodePortTotLinkActLim | 0 | 0 | This specifies the maximum link activation limit for this Port. The maximum value depends on the LS Role and Port Type, as follo… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.18 | wfAppnNodePortInbLinkActLim | 0 | 0 | This specifies the maximum inbound link activation limit for this Port. This value plus next one must total less than or equal to… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.20 | wfAppnNodePortActXidExchangeLimit | 0 | 0 | This specifies the maximum number of activation XIDs which will be sent before the Port is considered inoperable |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.21 | wfAppnNodePortNonActXidExchangeLimit | 0 | 0 | This specifies the maximum number of non-activation XIDs which will be sent before the Port is considered inoperable |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.22 | wfAppnNodePortLsXmitRcvCap | 0 | 0 | This specifies if the Port can receive Two-Way Simultaneous or Two-Way Alternate |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.23 | wfAppnNodePortTargetPacingCount | 0 | 0 | This specifies the target pacing count for BINDs on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.24 | wfAppnNodePortMaxSendBtuSize | 0 | 0 | This specifies the Maximum BTU Size which can be sent out this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.25 | wfAppnNodePortImplicitCpSessions | 0 | 0 | This specifies whether CP-CP sessions are permitted with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.26 | wfAppnNodePortImplicitLimResource | 0 | 0 | This specifies whether implicit link stations on this Port should be defined as limited resources |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.27 | wfAppnNodePortImplicitEffCap | 0 | 0 | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and max… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.28 | wfAppnNodePortImplicitConnCost | 0 | 0 | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cos… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.29 | wfAppnNodePortImplicitByteCost | 0 | 0 | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned v… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.30 | wfAppnNodePortImplicitSecurity | 0 | 0 | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.31 | wfAppnNodePortImplicitDelay | 0 | 0 | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.32 | wfAppnNodePortImplicitUsr1 | 0 | 0 | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with T… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.33 | wfAppnNodePortImplicitUsr2 | 0 | 0 | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.34 | wfAppnNodePortImplicitUsr3 | 0 | 0 | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with T… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.35 | wfAppnNodePortImplicitHprDisable | 0 | 0 | This specifies if HPR can be used with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.36 | wfAppnNodePortImplicitHprLlErrorDisable | 0 | 0 | This specifies if Link-Level Error recovery is to be used on implicit link stations which support HPR on this Port. NOTE: This fi… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.37 | wfAppnNodePortImplicitLinkDeactTime | 0 | 0 | This indicates the time in seconds before implicit Link Stations on this Port will be deactivated if it is an HPR limited Resour… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.38 | wfAppnNodePortDlcData | 0 | 0 | This specifies the local DLC address to be used by this port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.39 | wfAppnNodePortHprDlcData | 0 | 0 | This specifies the HPR address to be used by this port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.40 | wfAppnNodePortImplicitDlurDisable | 0 | 0 | This specifies if HPR can be used with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.41 | wfAppnNodePortImplicitUplinkToEN | 0 | 0 | For BrNN specifies whether the implicit Link Stations off this port are uplink or downlink if the adjacent node is an EN. |