The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for use with this TG.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Parsed from file appn.mib.txt
Company: None
Module: Wellfleet-APPN-MIB
The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for use with this TG.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.
Parsed from file Wellfleet-APPN-MIB.mib
Module: Wellfleet-APPN-MIB
Vendor: Wellfleet
Module: Wellfleet-APPN-MIB
[Automatically extracted from oidview.com]
wfAppnNodeLsEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." DEFVAL { 133 } ::= { wfAppnNodeLsEntry 15 }
wfAppnNodeLsEffCap OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 255. This is an administratively assigned value for use with this TG. DEVIATION: 6611 mib uses range of 0 thru 603,979,776." DEFVAL { 133 } ::= { wfAppnNodeLsEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.14.1.4.1.1 | wfAppnNodeLsDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Link … |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.2 | wfAppnNodeLsDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this … |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.3 | wfAppnNodeLsName | 0 | 0 | Administratively-assigned name for the link station. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.4 | wfAppnNodeLsPortName | 0 | 0 | Administratively-assigned name for the port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.5 | wfAppnNodeLsState | 0 | 0 | State of this link station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.6 | wfAppnNodeLsCpName | 0 | 0 | Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is n… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.7 | wfAppnNodeLsTgNum | 0 | 0 | Number associated with the TG to this link station. Range ( 1 - 20) Predefined values for auto-activation |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.8 | wfAppnNodeLsLimResource | 0 | 0 | Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.9 | wfAppnNodeLsMigration | 0 | 0 | Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a … |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.10 | wfAppnNodeLsBlockNum | 0 | 0 | The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurabl… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.11 | wfAppnNodeLsIdNum | 0 | 0 | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the … |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.12 | wfAppnNodeLsCpCpSession | 0 | 0 | Indicates whether CP-CP sessions are supported by this link station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.13 | wfAppnNodeLsTargetPacingCount | 0 | 0 | Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is signifi… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.14 | wfAppnNodeLsMaxSendBtuSize | 0 | 0 | Numeric value between 0 and 4105 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be … |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.16 | wfAppnNodeLsConnCost | 0 | 0 | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cos… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.17 | wfAppnNodeLsByteCost | 0 | 0 | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned v… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.18 | wfAppnNodeLsSecurity | 0 | 0 | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.19 | wfAppnNodeLsDelay | 0 | 0 | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.20 | wfAppnNodeLsUsr1 | 0 | 0 | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.21 | wfAppnNodeLsUsr2 | 0 | 0 | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated wit… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.22 | wfAppnNodeLsUsr3 | 0 | 0 | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.23 | wfAppnNodeLsCpType | 0 | 0 | This specifies the APPN Node type of Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.24 | wfAppnNodeLsAutoActivateDisable | 0 | 0 | This specifies if the link should be automatically activated when the Port becomes active. Should be disabled if CP-CP sessions… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.25 | wfAppnNodeLsSolicitSscpSessionsDisable | 0 | 0 | This specifies if SSCP Sessions should be solicited from this Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.26 | wfAppnNodeLsUseDefaultTgChars | 0 | 0 | Indicates whether the default TG characteristics specified for the Port should be used for this link station, or if explicit TG c… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.27 | wfAppnNodeLsLinkData | 0 | 0 | this for Link Address (MAC/SAP, SDLC Address) |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.28 | wfAppnNodeLsDlurDisable | 0 | 0 | This specifies if the adjacent Link Station is a node to be serviced by DLUR. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.29 | wfAppnNodeLsDspuName | 0 | 0 | 8-byte name of the downstream PU supported by DLUR. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.30 | wfAppnNodeLsDlusName | 0 | 0 | Fully-qualified name of the DLUS node which will serve this DLUR Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.31 | wfAppnNodeLsBackupDlusName | 0 | 0 | Fully-qualified name of the backup DLUS node which may serve this DLUR Link Station. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.32 | wfAppnNodeLsHprDisable | 0 | 0 | This specifies if HPR is supported on this Link Station |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.33 | wfAppnNodeLsHprLlErrorDisable | 0 | 0 | This specifies if Link-Level Error recovery is to be used on this link station. NOTE: This field does not enable/disable HPRs sel… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.34 | wfAppnNodeLsLinkDeactTime | 0 | 0 | This indicates the time in seconds before this Link Station will be deactivated if it is an HPR limited Resource. |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.35 | wfAppnNodeLsLinkRetryCount | 0 | 0 | This indicates for how many times will APPN CP component retry to restart the link station before it gives up, 99 default is for… |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.36 | wfAppnNodeLsBranchLinkType | 0 | 0 | For BrNN specifies whether the link is an uplink or a downlink |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.37 | wfAppnNodeLsAdjBrNNLinkSupp | 0 | 0 | Specifies whether the adjacent node is required, allowed or prohibited from being a BrNN ( i.e. an BrNN showing its NN face ). |
| 1.3.6.1.4.1.18.3.5.14.1.4.1.38 | wfAppnNodeLsDefaultNNS | 0 | 0 | This field can be set to yes to indicate that the adjacent CP is the preferred NN server |