Vendor: Wellfleet
Module: Wellfleet-IGMP-MIB
[Automatically extracted from oidview.com]
wfIgmpBase OBJECT IDENTIFIER ::= { wfIgmpGroup 1 }
wfIgmpBase OBJECT IDENTIFIER ::= { wfIgmpGroup 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.13.1.1 | wfIgmpBaseCreate | 1 | 1 | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IGMP. |
1.3.6.1.4.1.18.3.5.3.13.1.2 | wfIgmpBaseEnable | 1 | 1 | Enable/Disable Parameter indicates whether this IGMP record is enabled or disabled. |
1.3.6.1.4.1.18.3.5.3.13.1.3 | wfIgmpBaseState | 1 | 1 | The current state of the entire IGMP. |
1.3.6.1.4.1.18.3.5.3.13.1.4 | wfIgmpBaseEstimatedGroups | 1 | 1 | The number of estimated groups that will be used through this router. |
1.3.6.1.4.1.18.3.5.3.13.1.5 | wfIgmpBaseVersionThreshold | 1 | 1 | The time (in seconds) that will pass after the last old style query before we will try to become the igmp designated querier |
1.3.6.1.4.1.18.3.5.3.13.1.6 | wfIgmpBaseDebug | 1 | 1 | This is a debug field for IGMP. Setting bits cause igmp to gernerate certain log messages. This field will NOT restart IGMP. The f… |
1.3.6.1.4.1.18.3.5.3.13.1.7 | wfIgmpBaseJoinAckEnable | 1 | 1 | Enable/Disable Parameter indicates whether an immediate response is needed for an IGMP report by sending an IGMP query to the gro… |
1.3.6.1.4.1.18.3.5.3.13.1.8 | wfIgmpBaseFwdCacheLimit | 1 | 1 | Maximum number of MTM forwarding cache entries |
1.3.6.1.4.1.18.3.5.3.13.1.9 | wfIgmpBaseIgnoreNonLocalReport | 1 | 1 | Whether IGMP joins/leaves from a non-local network are accepted. For example, if network 10.10.10.0/24 is defined on circuit 1 wh… |
1.3.6.1.4.1.18.3.5.3.13.1.10 | wfIgmpBaseRelayEnable | 1 | 1 | Enable/Disable Parameter indicates whether the IGMP Relay is enabled or disabled. |
1.3.6.1.4.1.18.3.5.3.13.1.11 | wfIgmpBaseRelayTimeoutValue | 1 | 1 | The timer value for timing out IGMP-R forward entries. |
1.3.6.1.4.1.18.3.5.3.13.1.12 | wfIgmpBaseRelayFwdOptions | 1 | 1 | This mib attribute indicates whether multicast data is forwarded to IGMP-R primary upstream circuit, backup upstream, or both of … |
1.3.6.1.4.1.18.3.5.3.13.1.13 | wfIgmpBaseGroupCount | 1 | 1 | Actual number of groups presented on the router |
1.3.6.1.4.1.18.3.5.3.13.1.14 | wfIgmpBasePerStreamRedundEnable | 1 | 1 | Enable/Disable Parameter indicates whether the IGMP Relay Per-Stream Redundancy is enabled or disabled. Per-Stream Redundancy all… |
1.3.6.1.4.1.18.3.5.3.13.1.15 | wfIgmpBaseSSMRanges | 1 | 1 | The list of SSM range. This identifies which Group address is SSM range. first 4 octets: SSM range start address next 4 octets: … |
1.3.6.1.4.1.18.3.5.3.13.1.16 | wfIgmpBaseTranslationEnable | 1 | 1 | Enable/Disable Parameter indicates whether a group report should be translated into one or more (group, source) pairs. This is us… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.13.2 | wfIgmpIfTable | 1 | 40 | wfIgmpIftable |
1.3.6.1.4.1.18.3.5.3.13.3 | wfIgmpGroupTable | 1 | 10 | A table of IGMP groups |
1.3.6.1.4.1.18.3.5.3.13.4 | wfIgmpStaticGroupTable | 1 | 5 | The list of elements in IGMP Static membership table |
1.3.6.1.4.1.18.3.5.3.13.5 | wfIgmpBoundaryTable | 1 | 7 | The list of elements in IGMP Boundary table |
1.3.6.1.4.1.18.3.5.3.13.6 | wfIgmpTranslationTable | 1 | 4 | The list of entries in IGMP Translation table. Such an entry is used to translate a group G to one or more (group, source) pairs.… |