The list of SSM range. This identifies
which Group address is SSM range.
first 4 octets: SSM range start address
next 4 octets: SSM range network mask
For instance, two SSM ranges,
232.0.0.0/255.0.0.0 and
233.0.0.0/255.255.255.0 are configured as
0xE8 0x00 0x00 0x00 0xFF 0x00 0x00 0x00
0xE9 0x00 0x00 0x00 0xFF 0xFF 0xFF 0x00
The default of this MIB is (nil) that
represents 232.0.0.0/255.0.0.0. If any
configuration error is detected, this MIB
will be set to (nil) and 232.0.0.0/255.0.0.0
becomes a default SSM range.
When it is set to 0x00, 0x0000, 0x000000,
0x00000000, that is, all zero OCTET STRING,
that will disable SSM Ranges.
Parsed from file igmp.mib.txt
Company: wellfleet
Module: Wellfleet-IGMP-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
wfIgmpBaseSSMRanges OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The list of SSM range. This identifies which Group address is SSM range. first 4 octets: SSM range start address next 4 octets: SSM range network mask For instance, two SSM ranges, 232.0.0.0/255.0.0.0 and 233.0.0.0/255.255.255.0 are configured as 0xE8 0x00 0x00 0x00 0xFF 0x00 0x00 0x00 0xE9 0x00 0x00 0x00 0xFF 0xFF 0xFF 0x00 The default of this MIB is (nil) that represents 232.0.0.0/255.0.0.0. If any configuration error is detected, this MIB will be set to (nil) and 232.0.0.0/255.0.0.0 becomes a default SSM range. When it is set to 0x00, 0x0000, 0x000000, 0x00000000, that is, all zero OCTET STRING, that will disable SSM Ranges." ::= { wfIgmpBase 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.13.1.15.0 | wfIgmpBaseSSMRanges | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.13.1.1 | wfIgmpBaseCreate | 1 | 1 | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IGMP. |
1.3.6.1.4.1.18.3.5.3.13.1.2 | wfIgmpBaseEnable | 1 | 1 | Enable/Disable Parameter indicates whether this IGMP record is enabled or disabled. |
1.3.6.1.4.1.18.3.5.3.13.1.3 | wfIgmpBaseState | 1 | 1 | The current state of the entire IGMP. |
1.3.6.1.4.1.18.3.5.3.13.1.4 | wfIgmpBaseEstimatedGroups | 1 | 1 | The number of estimated groups that will be used through this router. |
1.3.6.1.4.1.18.3.5.3.13.1.5 | wfIgmpBaseVersionThreshold | 1 | 1 | The time (in seconds) that will pass after the last old style query before we will try to become the igmp designated querier |
1.3.6.1.4.1.18.3.5.3.13.1.6 | wfIgmpBaseDebug | 1 | 1 | This is a debug field for IGMP. Setting bits cause igmp to gernerate certain log messages. This field will NOT restart IGMP. The f… |
1.3.6.1.4.1.18.3.5.3.13.1.7 | wfIgmpBaseJoinAckEnable | 1 | 1 | Enable/Disable Parameter indicates whether an immediate response is needed for an IGMP report by sending an IGMP query to the gro… |
1.3.6.1.4.1.18.3.5.3.13.1.8 | wfIgmpBaseFwdCacheLimit | 1 | 1 | Maximum number of MTM forwarding cache entries |
1.3.6.1.4.1.18.3.5.3.13.1.9 | wfIgmpBaseIgnoreNonLocalReport | 1 | 1 | Whether IGMP joins/leaves from a non-local network are accepted. For example, if network 10.10.10.0/24 is defined on circuit 1 wh… |
1.3.6.1.4.1.18.3.5.3.13.1.10 | wfIgmpBaseRelayEnable | 1 | 1 | Enable/Disable Parameter indicates whether the IGMP Relay is enabled or disabled. |
1.3.6.1.4.1.18.3.5.3.13.1.11 | wfIgmpBaseRelayTimeoutValue | 1 | 1 | The timer value for timing out IGMP-R forward entries. |
1.3.6.1.4.1.18.3.5.3.13.1.12 | wfIgmpBaseRelayFwdOptions | 1 | 1 | This mib attribute indicates whether multicast data is forwarded to IGMP-R primary upstream circuit, backup upstream, or both of … |
1.3.6.1.4.1.18.3.5.3.13.1.13 | wfIgmpBaseGroupCount | 1 | 1 | Actual number of groups presented on the router |
1.3.6.1.4.1.18.3.5.3.13.1.14 | wfIgmpBasePerStreamRedundEnable | 1 | 1 | Enable/Disable Parameter indicates whether the IGMP Relay Per-Stream Redundancy is enabled or disabled. Per-Stream Redundancy all… |
1.3.6.1.4.1.18.3.5.3.13.1.16 | wfIgmpBaseTranslationEnable | 1 | 1 | Enable/Disable Parameter indicates whether a group report should be translated into one or more (group, source) pairs. This is us… |