The desired identifier (interface token) for
this interface that is (at least) unique on
the link this interface is attached to. The interface
token is combined with an address prefix to form an
interface address. If no token value is configured
(the token length is zero), the interface token is
autoconfigured according to the rules of the link type
this interface is attached to.
Parsed from file ipv6.mib.txt
Company: None
Module: Wellfleet-IPV6-MIB
The desired identifier (interface token) for
this interface that is (at least) unique on
the link this interface is attached to. The interface
token is combined with an address prefix to form an
interface address. If no token value is configured
(the token length is zero), the interface token is
autoconfigured according to the rules of the link type
this interface is attached to.
Parsed from file Wellfleet-IPV6-MIB.mib
Module: Wellfleet-IPV6-MIB
Vendor: Wellfleet
Module: Wellfleet-IPV6-MIB
[Automatically extracted from oidview.com]
wfIpv6IfCfgToken OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The desired identifier (interface token) for this interface that is (at least) unique on the link this interface is attached to. The interface token is combined with an address prefix to form an interface address. If no token value is configured (the token length is zero), the interface token is autoconfigured according to the rules of the link type this interface is attached to." ::= { wfIpv6IfEntry 7 }
wfIpv6IfCfgToken OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The desired identifier (interface token) for this interface that is (at least) unique on the link this interface is attached to. The interface token is combined with an address prefix to form an interface address. If no token value is configured (the token length is zero), the interface token is autoconfigured according to the rules of the link type this interface is attached to." ::= { wfIpv6IfEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.1 | wfIpv6IfDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IPv6 inter… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.2 | wfIpv6IfDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IPv6 int… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.3 | wfIpv6IfState | 0 | 0 | The current operational state of the interface. Tokenless state indicates the no valid address token is assigned to the interface… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.4 | wfIpv6IfIndex | 0 | 0 | A unique non-zero value for each interface. |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.5 | wfIpv6IfDescr | 0 | 0 | An optional textual string containing description of the interface. |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.6 | wfIpv6IfCircuit | 0 | 0 | The Circuit Number that this interface runs over. If Circuit Number is between 1 and 1023, it identifies a subnetwork/datalink la… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.8 | wfIpv6IfCfgTokenLength | 0 | 0 | The length of the configured interface token in bits. |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.9 | wfIpv6IfToken | 0 | 0 | wfIpv6Iftoken |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.10 | wfIpv6IfTokenLength | 0 | 0 | wfIpv6IftokenLength |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.11 | wfIpv6IfCfgPhysicalAddress | 0 | 0 | The desired link layer address set by the user |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.12 | wfIpv6IfPhysicalAddress | 0 | 0 | The Physical Address for this Interface - actual one used |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.13 | wfIpv6IfCfgLinkMTU | 0 | 0 | The configured link MTU. It will be only considered if it is less than the default MTU of the underlying media. A value of zero i… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.14 | wfIpv6IfFwdCacheSize | 0 | 0 | Maximum number of entries allowed in the Forwarding (Cache) Table at one time. There is a forwarding table per interface. If thi… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.15 | wfIpv6IfSlotMask | 0 | 0 | Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next m… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.16 | wfIpv6IfLastChange | 0 | 0 | The time (in hundredths of a second) since the node was last re-initialized at the time the interface entered its current operati… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.17 | wfIpv6IfReasmMaxSize | 0 | 0 | The size of the largest IPv6 datagram which this entity can re-assemble from incoming IPv6 fragmented packets received on this in… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.18 | wfIpv6IfMaxInfo | 0 | 0 | The maximum size of the INFO (non-MAC) field that this port will receive or transmit (effective MTU size). |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.19 | wfIpv6IfRedirect | 0 | 0 | Indicates whether we're sending out redirects on this Interface or not |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.20 | wfIpv6IfIcmpErrorLimit | 0 | 0 | The maximum number of ICMP Error messages that is allowed to be transmitted within 1 second interval out of this interface. |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.21 | wfIpv6IfTrEndStation | 0 | 0 | wfIpv6IftrEndStation |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.22 | wfIpv6IfSMDSGroupAddress | 0 | 0 | The SMDS group address |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.23 | wfIpv6IfFRBcastDlci | 0 | 0 | Frame Relay broadcast dlci |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.24 | wfIpv6IfFRMcast1Dlci | 0 | 0 | Frame Relay multicast dlci #1 |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.25 | wfIpv6IfFRMcast2Dlci | 0 | 0 | Frame Relay multicast dlci #2 |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.26 | wfIpv6IfTunnelProtocol | 0 | 0 | wfIpv6IftunnelProtocol |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.27 | wfIpv6IfIPv4TunnelLocalAddress | 0 | 0 | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv4 or ip4sa, this parameter contains the local IPv4 address of this … |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.28 | wfIpv6IfIPv4TunnelRemoteAddress | 0 | 0 | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv4 or ip4sa, this parameter contains the remote IPv4 address of this… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.29 | wfIpv6IfIpv6TunnelIfIndex | 0 | 0 | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv6 or ip6sa, this parameter contains the IPv6 interface index of th… |
1.3.6.1.4.1.18.3.5.3.16.1.1.2.1.30 | wfIpv6IfIpv6TunnelRemoteAddress | 0 | 0 | If wfIpv6IfCircuit is zero and the tunnel protocol type is IPv6 or ip6sa, this parameter contains the remote IPv6 address of this… |