This parameter enables or disables the backup OSPF soloist's
backup link state database. When the parameter is set to disabled
the OSPF backup soloist will not maintain a copy of the OSPF link
state database.
Parsed from file ospf.mib.txt
Company: None
Module: Wellfleet-OSPF-MIB
This parameter enables or disables the backup OSPF soloist's
backup link state database. When the parameter is set to disabled
the OSPF backup soloist will not maintain a copy of the OSPF link
state database.
Parsed from file Wellfleet-OSPF-MIB.mib
Module: Wellfleet-OSPF-MIB
Vendor: Wellfleet
Module: Wellfleet-OSPF-MIB
[Automatically extracted from oidview.com]
wfOspfBackupDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter enables or disables the backup OSPF soloist's backup link state database. When the parameter is set to disabled the OSPF backup soloist will not maintain a copy of the OSPF link state database." DEFVAL { disabled } ::= { wfOspfGeneralGroup 12 }
wfOspfBackupDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter enables or disables the backup OSPF soloist's backup link state database. When the parameter is set to disabled the OSPF backup soloist will not maintain a copy of the OSPF link state database." DEFVAL { disabled } ::= { wfOspfGeneralGroup 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.3.1.12.0 | wfOspfBackupDisable | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.3.1.1 | wfOspfGeneralDelete | 1 | 1 | 'This value determines whether OSPF is configured' |
1.3.6.1.4.1.18.3.5.3.2.3.1.2 | wfOspfGeneralDisable | 1 | 1 | 'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one in… |
1.3.6.1.4.1.18.3.5.3.2.3.1.3 | wfOspfGeneralState | 1 | 1 | 'The state of OSPF' |
1.3.6.1.4.1.18.3.5.3.2.3.1.4 | wfOspfRouterId | 1 | 1 | 'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should defau… |
1.3.6.1.4.1.18.3.5.3.2.3.1.5 | wfOspfVersionNumber | 1 | 1 | 'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title' |
1.3.6.1.4.1.18.3.5.3.2.3.1.6 | wfOspfAreaBdrRtrStatus | 1 | 1 | 'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas' |
1.3.6.1.4.1.18.3.5.3.2.3.1.7 | wfOspfASBdrRtrStatus | 1 | 1 | 'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification … |
1.3.6.1.4.1.18.3.5.3.2.3.1.8 | wfOspfTOSSupport | 1 | 1 | wfOspftOSSupport |
1.3.6.1.4.1.18.3.5.3.2.3.1.9 | wfOspfSpfHoldDown | 1 | 1 | Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down. |
1.3.6.1.4.1.18.3.5.3.2.3.1.10 | wfOspfSlotMask | 1 | 1 | Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot… |
1.3.6.1.4.1.18.3.5.3.2.3.1.11 | wfOspfNewAseMetricSupport | 1 | 1 | A parameter to specify if the new style ASE metric support is enabled. The new metric is not compatible with the pre-8.0 ASE met… |
1.3.6.1.4.1.18.3.5.3.2.3.1.13 | wfOspfPrimaryLogMask | 1 | 1 | A parameter to specify which OSPF log messages should be logged. This will only effect the Primary OSPF gate. Each bit represents… |
1.3.6.1.4.1.18.3.5.3.2.3.1.14 | wfOspfBackupLogMask | 1 | 1 | A parameter to specify which OSPF log messages should be logged. This will only effect the Backup OSPF gate. Each bit represents … |
1.3.6.1.4.1.18.3.5.3.2.3.1.15 | wfOspfAseTagDefault | 1 | 1 | This parameter indicates how ASE tags will be generated for those ASEs whose tags are not altered by an export route filter or an… |
1.3.6.1.4.1.18.3.5.3.2.3.1.16 | wfOspfPrimarySlot | 1 | 1 | Slot on which OSPF Primary is running. Slots can be 1-14. Default is zero. |
1.3.6.1.4.1.18.3.5.3.2.3.1.17 | wfOspfBackupSlot | 1 | 1 | Slot on which OSPF Backup is running. Slots can be 1-14. Default is zero. |
1.3.6.1.4.1.18.3.5.3.2.3.1.18 | wfOspfMaximumPath | 1 | 1 | Maximum number of equal cost paths allowed for a network installed by OSPF. |
1.3.6.1.4.1.18.3.5.3.2.3.1.19 | wfOspfSlotPriority | 1 | 1 | Comma-separated list of slots specifying the order in which slots should attempt to bring up OSPF soloist. They are listed in the… |
1.3.6.1.4.1.18.3.5.3.2.3.1.20 | wfOspfLsdbCount | 1 | 1 | Running count of LSDB entries |
1.3.6.1.4.1.18.3.5.3.2.3.1.21 | wfOspfMulticastExtensions | 1 | 1 | A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in… |
1.3.6.1.4.1.18.3.5.3.2.3.1.22 | wfOspfMulticastDeterministic | 1 | 1 | This controls whether or not the deterministic variation of the MOSPF Dijkstra is run or not |
1.3.6.1.4.1.18.3.5.3.2.3.1.23 | wfOspfMulticastRoutePinning | 1 | 1 | This controls whether or not the route pinning variation of the MOSPF Dijkstra is run or not |
1.3.6.1.4.1.18.3.5.3.2.3.1.24 | wfOspfOpaqueCapability | 1 | 1 | This controls whether or not the router will accept and process OPAQUE LSAs |
1.3.6.1.4.1.18.3.5.3.2.3.1.25 | wfOspfDeterministicMcastHoldDown | 1 | 1 | This controls whether or not the Hold Down feature for the Deterministic MOSPF is enabled. If it is enabled, a data flow does not… |
1.3.6.1.4.1.18.3.5.3.2.3.1.26 | wfMospfEntryTimeoutValue | 1 | 1 | The timer value for timing out MOSPF forward entries. |
1.3.6.1.4.1.18.3.5.3.2.3.1.27 | wfOspfMaxQueuedMcastPkts | 1 | 1 | This controls how many mcast packets can be queued on each slot for all flows before the building of mcast trees finishes. If it i… |
1.3.6.1.4.1.18.3.5.3.2.3.1.28 | wfOspfMcastUseDynTTL | 1 | 1 | This controls whether dynamic TTL threshold is used. Data forwarding is a little bit faster when it is NOT used. Dynamic TTL mean… |
1.3.6.1.4.1.18.3.5.3.2.3.1.29 | wfOspfRfc1583Compatibility | 1 | 1 | Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'e… |
1.3.6.1.4.1.18.3.5.3.2.3.1.30 | wfOspfASEMcastEnable | 1 | 1 | This attribute indicates whether AS External routes are multicast capable. If enabled, the advertising ASBR sets the MC-bit in th… |
1.3.6.1.4.1.18.3.5.3.2.3.1.31 | wfOspfNssaBorderRouter | 1 | 1 | `A flag to note whether this router NSSA border router' |
1.3.6.1.4.1.18.3.5.3.2.3.1.32 | wfOspfLsaRefreshMax | 1 | 1 | `Maximum number of consecutive refreshes of self-originated Summary and External LSAs before applying a configured delay. A value… |
1.3.6.1.4.1.18.3.5.3.2.3.1.33 | wfOspfLsaRefreshDelay | 1 | 1 | `Delay to apply between the maximum number of consecutive refreshes of self-originated Summary and External LSAs if a non-zero ma… |
1.3.6.1.4.1.18.3.5.3.2.3.1.34 | wfOspfAggrUseMaxCost | 1 | 1 | When area range is configured, sum net lsa is generated depends on this mib attribute: enabled: Use Max Metric to aggregate netw… |
1.3.6.1.4.1.18.3.5.3.2.3.1.35 | wfOspfFwdAddrComp | 1 | 1 | When enabled allows OSPF to comply with RFC1583 with respect to forwarding address changes. When disabled OSPF remains compatiabl… |
1.3.6.1.4.1.18.3.5.3.2.3.1.36 | wfOspfMtuUseCommonDefault | 1 | 1 | when this parameter is enabled, OSPF will use the MTU size of ethernet, that is, 1500 in all the interfaces regardless of what IP… |
1.3.6.1.4.1.18.3.5.3.2.3.1.37 | wfOspfRfc3101FwdAddrCompatibility | 1 | 1 | Controls to choose Type-7 forward address by the method defined by RFC3101 or RFC1587. The choice will take effect after bouncing… |