Maximum number of equal cost paths allowed for a
network installed by OSPF.
Parsed from file ospf.mib.txt
Company: None
Module: Wellfleet-OSPF-MIB
Maximum number of equal cost paths allowed for a
network installed by OSPF.
Parsed from file Wellfleet-OSPF-MIB.mib
Module: Wellfleet-OSPF-MIB
Vendor: Wellfleet
Module: Wellfleet-OSPF-MIB
[Automatically extracted from oidview.com]
wfOspfMaximumPath OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS obsolete DESCRIPTION "Maximum number of equal cost paths allowed for a network installed by OSPF." DEFVAL { 1 } ::= { wfOspfGeneralGroup 18 }
wfOspfMaximumPath OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS obsolete DESCRIPTION "Maximum number of equal cost paths allowed for a network installed by OSPF." DEFVAL { 1 } ::= { wfOspfGeneralGroup 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.3.1.18.0 | wfOspfMaximumPath | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.3.1.1 | wfOspfGeneralDelete | 1 | 1 | 'This value determines whether OSPF is configured' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.2 | wfOspfGeneralDisable | 1 | 1 | 'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one in… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.3 | wfOspfGeneralState | 1 | 1 | 'The state of OSPF' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.4 | wfOspfRouterId | 1 | 1 | 'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should defau… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.5 | wfOspfVersionNumber | 1 | 1 | 'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.6 | wfOspfAreaBdrRtrStatus | 1 | 1 | 'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.7 | wfOspfASBdrRtrStatus | 1 | 1 | 'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification … |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.8 | wfOspfTOSSupport | 1 | 1 | wfOspftOSSupport |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.9 | wfOspfSpfHoldDown | 1 | 1 | Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.10 | wfOspfSlotMask | 1 | 1 | Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.11 | wfOspfNewAseMetricSupport | 1 | 1 | A parameter to specify if the new style ASE metric support is enabled. The new metric is not compatible with the pre-8.0 ASE met… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.12 | wfOspfBackupDisable | 1 | 1 | This parameter enables or disables the backup OSPF soloist's backup link state database. When the parameter is set to disabled t… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.13 | wfOspfPrimaryLogMask | 1 | 1 | A parameter to specify which OSPF log messages should be logged. This will only effect the Primary OSPF gate. Each bit represents… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.14 | wfOspfBackupLogMask | 1 | 1 | A parameter to specify which OSPF log messages should be logged. This will only effect the Backup OSPF gate. Each bit represents … |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.15 | wfOspfAseTagDefault | 1 | 1 | This parameter indicates how ASE tags will be generated for those ASEs whose tags are not altered by an export route filter or an… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.16 | wfOspfPrimarySlot | 1 | 1 | Slot on which OSPF Primary is running. Slots can be 1-14. Default is zero. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.17 | wfOspfBackupSlot | 1 | 1 | Slot on which OSPF Backup is running. Slots can be 1-14. Default is zero. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.19 | wfOspfSlotPriority | 1 | 1 | Comma-separated list of slots specifying the order in which slots should attempt to bring up OSPF soloist. They are listed in the… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.20 | wfOspfLsdbCount | 1 | 1 | Running count of LSDB entries |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.21 | wfOspfMulticastExtensions | 1 | 1 | A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.22 | wfOspfMulticastDeterministic | 1 | 1 | This controls whether or not the deterministic variation of the MOSPF Dijkstra is run or not |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.23 | wfOspfMulticastRoutePinning | 1 | 1 | This controls whether or not the route pinning variation of the MOSPF Dijkstra is run or not |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.24 | wfOspfOpaqueCapability | 1 | 1 | This controls whether or not the router will accept and process OPAQUE LSAs |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.25 | wfOspfDeterministicMcastHoldDown | 1 | 1 | This controls whether or not the Hold Down feature for the Deterministic MOSPF is enabled. If it is enabled, a data flow does not… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.26 | wfMospfEntryTimeoutValue | 1 | 1 | The timer value for timing out MOSPF forward entries. |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.27 | wfOspfMaxQueuedMcastPkts | 1 | 1 | This controls how many mcast packets can be queued on each slot for all flows before the building of mcast trees finishes. If it i… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.28 | wfOspfMcastUseDynTTL | 1 | 1 | This controls whether dynamic TTL threshold is used. Data forwarding is a little bit faster when it is NOT used. Dynamic TTL mean… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.29 | wfOspfRfc1583Compatibility | 1 | 1 | Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'e… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.30 | wfOspfASEMcastEnable | 1 | 1 | This attribute indicates whether AS External routes are multicast capable. If enabled, the advertising ASBR sets the MC-bit in th… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.31 | wfOspfNssaBorderRouter | 1 | 1 | `A flag to note whether this router NSSA border router' |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.32 | wfOspfLsaRefreshMax | 1 | 1 | `Maximum number of consecutive refreshes of self-originated Summary and External LSAs before applying a configured delay. A value… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.33 | wfOspfLsaRefreshDelay | 1 | 1 | `Delay to apply between the maximum number of consecutive refreshes of self-originated Summary and External LSAs if a non-zero ma… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.34 | wfOspfAggrUseMaxCost | 1 | 1 | When area range is configured, sum net lsa is generated depends on this mib attribute: enabled: Use Max Metric to aggregate netw… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.35 | wfOspfFwdAddrComp | 1 | 1 | When enabled allows OSPF to comply with RFC1583 with respect to forwarding address changes. When disabled OSPF remains compatiabl… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.36 | wfOspfMtuUseCommonDefault | 1 | 1 | when this parameter is enabled, OSPF will use the MTU size of ethernet, that is, 1500 in all the interfaces regardless of what IP… |
| 1.3.6.1.4.1.18.3.5.3.2.3.1.37 | wfOspfRfc3101FwdAddrCompatibility | 1 | 1 | Controls to choose Type-7 forward address by the method defined by RFC3101 or RFC1587. The choice will take effect after bouncing… |