This is the number of times an adjacency off of this circuit
goes from down to up or from up to down state.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
This is the number of times an adjacency off of this circuit
goes from down to up or from up to down state.
Parsed from file Wellfleet-OSI-MIB.mib
Module: Wellfleet-OSI-MIB
Vendor: Wellfleet
Module: Wellfleet-OSI-MIB
[Automatically extracted from oidview.com]
wfOsiCircuitAdjStateChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " This is the number of times an adjacency off of this circuit goes from down to up or from up to down state. " ::= { wfOsiCircuitEntry 27 }
wfOsiCircuitAdjStateChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times an adjacency off of this circuit goes from down to up or from up to down state." ::= { wfOsiCircuitEntry 27 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.6.3.1.1 | wfOsiCircuitDelete | 0 | 0 | This value determines whether this circuit is configured. |
| 1.3.6.1.4.1.18.3.5.6.3.1.2 | wfOsiCircuitDisable | 0 | 0 | Enable/Disable parameter for this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.3 | wfOsiCircuitState | 0 | 0 | This indicates whether the circuit state is up or down. |
| 1.3.6.1.4.1.18.3.5.6.3.1.4 | wfOsiCircuitId | 0 | 0 | A unique value for each known circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.5 | wfOsiCircuitRouterLevel | 0 | 0 | This is the level protocol that the circuit runs. Its a bit mask to allow for some combination of L1, L2, External, ES-IS-only. |
| 1.3.6.1.4.1.18.3.5.6.3.1.6 | wfOsiCircuitL1DefaultMetric | 0 | 0 | This is the default cost of using this circuit for L1 traffic. |
| 1.3.6.1.4.1.18.3.5.6.3.1.7 | wfOsiCircuitL2DefaultMetric | 0 | 0 | This is the default cost of using this circuit for L2 traffic. |
| 1.3.6.1.4.1.18.3.5.6.3.1.8 | wfOsiCircuitL1DrPriority | 0 | 0 | This is the priority for this system to become L1 designated router on this LAN circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.9 | wfOsiCircuitL2DrPriority | 0 | 0 | This is the priority for this system to become L2 designated router on this LAN circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.10 | wfOsiCircuitIsisHelloTimer | 0 | 0 | This is the period (secs) between IIH hello transmissions. |
| 1.3.6.1.4.1.18.3.5.6.3.1.11 | wfOsiCircuitEsisHelloTimer | 0 | 0 | This is the period (secs) between ISH hello transmissions. |
| 1.3.6.1.4.1.18.3.5.6.3.1.12 | wfOsiCircuitEshConfigTime | 0 | 0 | This is the suggested time between ESH transmissions from an ES went in ISHs (ESCT). |
| 1.3.6.1.4.1.18.3.5.6.3.1.13 | wfOsiCircuitPassword | 0 | 0 | This is Circuit Password for this circuit. Used to filter out Hellos from systems without the correct password. |
| 1.3.6.1.4.1.18.3.5.6.3.1.14 | wfOsiCircuitReceivedPkts | 0 | 0 | This is the number of pkts that have been received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.15 | wfOsiCircuitSentPkts | 0 | 0 | This is the number of pkts sent out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.16 | wfOsiCircuitDroppedPkts | 0 | 0 | This is the number of pkts dropped on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.17 | wfOsiCircuitFragmentedPdus | 0 | 0 | This is the number of pdus that had to be fragmented when forwarded out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.18 | wfOsiCircuitCongestionDiscards | 0 | 0 | This is the number of PDUs dropped because of congestion. |
| 1.3.6.1.4.1.18.3.5.6.3.1.19 | wfOsiCircuitAddrUnreachDiscards | 0 | 0 | This is the number of PDUs dropped because the destination is unreachable. |
| 1.3.6.1.4.1.18.3.5.6.3.1.20 | wfOsiCircuitAgedPduDiscards | 0 | 0 | This is the number of PDUs dropped because of aging. |
| 1.3.6.1.4.1.18.3.5.6.3.1.21 | wfOsiCircuitPduFormatErrDiscards | 0 | 0 | This is the number of PDUs dropped because of Format Error. |
| 1.3.6.1.4.1.18.3.5.6.3.1.22 | wfOsiCircuitUnsuppOptsDiscards | 0 | 0 | This is the number of PDUs dropped because they contain unsupported options. |
| 1.3.6.1.4.1.18.3.5.6.3.1.23 | wfOsiCircuitSentErrorReports | 0 | 0 | This is the number of error reports sent out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.24 | wfOsiCircuitReceivedControlPdus | 0 | 0 | This is the number of ESIS or ISIS PDUs received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.25 | wfOsiCircuitSentControlPdus | 0 | 0 | This is the number of ESIS or ISIS PDUs sent out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.26 | wfOsiCircuitStateChanges | 0 | 0 | This is the number of times the circuit goes from down to up or from up to down. |
| 1.3.6.1.4.1.18.3.5.6.3.1.28 | wfOsiCircuitInitFailures | 0 | 0 | This is the number of times this circuit fails to initialize. |
| 1.3.6.1.4.1.18.3.5.6.3.1.29 | wfOsiCircuitRejectedAdjs | 0 | 0 | This is the number of Adjacencies that were rejected on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.30 | wfOsiCircuitReceivedBadLsps | 0 | 0 | This is the number of bad Lsps received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.31 | wfOsiCircuitReceivedBadSnps | 0 | 0 | This is the number of BAD Sequence Number Pdus received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.32 | wfOsiCircuitReceivedBadEshs | 0 | 0 | This is the number of bad ESHs received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.33 | wfOsiCircuitReceivedBadL1Iihs | 0 | 0 | This is the number of bad L1 IIHs received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.34 | wfOsiCircuitReceivedBadL2Iihs | 0 | 0 | This is the number of bad L2 IIHs received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.35 | wfOsiCircuitL1DrChanges | 0 | 0 | This is the number of times the L1 Designated Router has been elected on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.36 | wfOsiCircuitL2DrChanges | 0 | 0 | This is the number of times the L2 Designated Router has been elected on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.37 | wfOsiCircuitClnpForwarding | 0 | 0 | This shows whether forwarding is enabled over this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.38 | wfOsiCircuitClnpDefaultLifeTime | 0 | 0 | This is the lifetime included in clnp pdus generated by this router (i.e. echo and echo reply pdus, error report pdus). |
| 1.3.6.1.4.1.18.3.5.6.3.1.39 | wfOsiCircuitClnpInReceives | 0 | 0 | This is the number of CLNP pdus received from this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.40 | wfOsiCircuitClnpInAddrErrors | 0 | 0 | This is the number of CLNP pdus recived from this circuit with Address format errors. |
| 1.3.6.1.4.1.18.3.5.6.3.1.41 | wfOsiCircuitClnpForwPdus | 0 | 0 | This is the number of Clnp PDUs received on this circuit that are forwarded. |
| 1.3.6.1.4.1.18.3.5.6.3.1.42 | wfOsiCircuitClnpInUnknownNlps | 0 | 0 | This is the number of Clnp PDUs received on this circuit where the network layer addressed is unknown (Bad NLPID). |
| 1.3.6.1.4.1.18.3.5.6.3.1.43 | wfOsiCircuitClnpInDelivers | 0 | 0 | This is the number of Clnp PDUs received on this circuit whose destination is this router. |
| 1.3.6.1.4.1.18.3.5.6.3.1.44 | wfOsiCircuitClnpInUnknownUlps | 0 | 0 | This is number of Clnp PDUs received on this circuit addressed to this router where the upper layer is unknown. |
| 1.3.6.1.4.1.18.3.5.6.3.1.45 | wfOsiCircuitClnpSegCreates | 0 | 0 | This is the number of CLNP segments created from pdus received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.46 | wfOsiCircuitClnpInOpts | 0 | 0 | This is the number of CLNP pdus received with an options portion. |
| 1.3.6.1.4.1.18.3.5.6.3.1.47 | wfOsiCircuitClnpOutOpts | 0 | 0 | This is the number of CLNP pdus sent with an options portion. |
| 1.3.6.1.4.1.18.3.5.6.3.1.48 | wfOsiCircuitEsisEshIns | 0 | 0 | This is the number of ESHs received from this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.49 | wfOsiCircuitEsisIshOuts | 0 | 0 | This is the number of ISHs sent out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.50 | wfOsiCircuitEsisRduOuts | 0 | 0 | This is the number of Redirects sent out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.51 | wfOsiCircuitL1DesignatedRouter | 0 | 0 | This is the ID of the L1 Designated Router on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.52 | wfOsiCircuitL2DesignatedRouter | 0 | 0 | This is the ID of the L2 Designated Router on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.53 | wfOsiCircuitClnpOutEchoReplies | 0 | 0 | This is the number of CLNP Echo Replies sent out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.54 | wfOsiCircuitClnpOutEchoRequests | 0 | 0 | This is the number of Clnp Echo Requests sent out this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.55 | wfOsiCircuitClnpInEchoReplies | 0 | 0 | This is the number of CLNP Echo Replies received on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.56 | wfOsiCircuitClnpInEchoRequests | 0 | 0 | This is the number of CLNP Echo Requests recived on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.57 | wfOsiCircuitNumDynEsAdjs | 0 | 0 | This is the number of Dynamic End System Adjacencies formed on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.58 | wfOsiCircuitNumDynL1Adjs | 0 | 0 | This is the number of Dynamic Level 1 Intermediate System Adjacencies formed on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.59 | wfOsiCircuitNumDynL2Adjs | 0 | 0 | This is the number of Dynamic Level 2 Intermediate System Adjacencies formed on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.60 | wfOsiCircuitNumDynPtpIsAdjs | 0 | 0 | This is the number of Dynamic Intermediate System Point-to-Point Adjacencies formed on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.61 | wfOsiCircuitNumDynPtpEsAdjs | 0 | 0 | This is the number of Dynamic End System Point-to-Point Adjaciences formed on this circuit. |
| 1.3.6.1.4.1.18.3.5.6.3.1.62 | wfOsiCircuitBadIshReceived | 0 | 0 | This is the number of bad Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point circ… |
| 1.3.6.1.4.1.18.3.5.6.3.1.63 | wfOsiCircuitEsisIshIns | 0 | 0 | This is the number of good Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point cir… |
| 1.3.6.1.4.1.18.3.5.6.3.1.64 | wfOsiCircuitIihHoldMultiplier | 0 | 0 | This is the multiplier value used to compute the hold time set in the IIH PDUs transmitted from this router. Hold time equals IIH… |
| 1.3.6.1.4.1.18.3.5.6.3.1.65 | wfOsiCircuitIshHoldMultiplier | 0 | 0 | This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH… |
| 1.3.6.1.4.1.18.3.5.6.3.1.66 | wfOsiCircuitDisableRedirect | 0 | 0 | Allow Redirects to be disabled. This is required when operating over Frame Relay in group mode in a partial mesh topology. |