This is the multiplier value used to compute the hold time
set in the ISH PDUs transmitted from this router. Hold time
equals IIH Timer times IIH Hold Multiplier.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
This is the multiplier value used to compute the hold time
set in the ISH PDUs transmitted from this router. Hold time
equals IIH Timer times IIH Hold Multiplier.
Parsed from file Wellfleet-OSI-MIB.mib
Module: Wellfleet-OSI-MIB
Vendor: Wellfleet
Module: Wellfleet-OSI-MIB
[Automatically extracted from oidview.com]
wfOsiCircuitIshHoldMultiplier OBJECT-TYPE SYNTAX INTEGER(1..5) ACCESS read-write STATUS mandatory DESCRIPTION " This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier. " DEFVAL { 3 } ::= { wfOsiCircuitEntry 65 }
wfOsiCircuitIshHoldMultiplier OBJECT-TYPE SYNTAX INTEGER(1..5) ACCESS read-write STATUS mandatory DESCRIPTION "This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier." DEFVAL { 3 } ::= { wfOsiCircuitEntry 65 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.6.3.1.1 | wfOsiCircuitDelete | 0 | 0 | This value determines whether this circuit is configured. |
1.3.6.1.4.1.18.3.5.6.3.1.2 | wfOsiCircuitDisable | 0 | 0 | Enable/Disable parameter for this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.3 | wfOsiCircuitState | 0 | 0 | This indicates whether the circuit state is up or down. |
1.3.6.1.4.1.18.3.5.6.3.1.4 | wfOsiCircuitId | 0 | 0 | A unique value for each known circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.5 | wfOsiCircuitRouterLevel | 0 | 0 | This is the level protocol that the circuit runs. Its a bit mask to allow for some combination of L1, L2, External, ES-IS-only. |
1.3.6.1.4.1.18.3.5.6.3.1.6 | wfOsiCircuitL1DefaultMetric | 0 | 0 | This is the default cost of using this circuit for L1 traffic. |
1.3.6.1.4.1.18.3.5.6.3.1.7 | wfOsiCircuitL2DefaultMetric | 0 | 0 | This is the default cost of using this circuit for L2 traffic. |
1.3.6.1.4.1.18.3.5.6.3.1.8 | wfOsiCircuitL1DrPriority | 0 | 0 | This is the priority for this system to become L1 designated router on this LAN circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.9 | wfOsiCircuitL2DrPriority | 0 | 0 | This is the priority for this system to become L2 designated router on this LAN circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.10 | wfOsiCircuitIsisHelloTimer | 0 | 0 | This is the period (secs) between IIH hello transmissions. |
1.3.6.1.4.1.18.3.5.6.3.1.11 | wfOsiCircuitEsisHelloTimer | 0 | 0 | This is the period (secs) between ISH hello transmissions. |
1.3.6.1.4.1.18.3.5.6.3.1.12 | wfOsiCircuitEshConfigTime | 0 | 0 | This is the suggested time between ESH transmissions from an ES went in ISHs (ESCT). |
1.3.6.1.4.1.18.3.5.6.3.1.13 | wfOsiCircuitPassword | 0 | 0 | This is Circuit Password for this circuit. Used to filter out Hellos from systems without the correct password. |
1.3.6.1.4.1.18.3.5.6.3.1.14 | wfOsiCircuitReceivedPkts | 0 | 0 | This is the number of pkts that have been received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.15 | wfOsiCircuitSentPkts | 0 | 0 | This is the number of pkts sent out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.16 | wfOsiCircuitDroppedPkts | 0 | 0 | This is the number of pkts dropped on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.17 | wfOsiCircuitFragmentedPdus | 0 | 0 | This is the number of pdus that had to be fragmented when forwarded out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.18 | wfOsiCircuitCongestionDiscards | 0 | 0 | This is the number of PDUs dropped because of congestion. |
1.3.6.1.4.1.18.3.5.6.3.1.19 | wfOsiCircuitAddrUnreachDiscards | 0 | 0 | This is the number of PDUs dropped because the destination is unreachable. |
1.3.6.1.4.1.18.3.5.6.3.1.20 | wfOsiCircuitAgedPduDiscards | 0 | 0 | This is the number of PDUs dropped because of aging. |
1.3.6.1.4.1.18.3.5.6.3.1.21 | wfOsiCircuitPduFormatErrDiscards | 0 | 0 | This is the number of PDUs dropped because of Format Error. |
1.3.6.1.4.1.18.3.5.6.3.1.22 | wfOsiCircuitUnsuppOptsDiscards | 0 | 0 | This is the number of PDUs dropped because they contain unsupported options. |
1.3.6.1.4.1.18.3.5.6.3.1.23 | wfOsiCircuitSentErrorReports | 0 | 0 | This is the number of error reports sent out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.24 | wfOsiCircuitReceivedControlPdus | 0 | 0 | This is the number of ESIS or ISIS PDUs received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.25 | wfOsiCircuitSentControlPdus | 0 | 0 | This is the number of ESIS or ISIS PDUs sent out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.26 | wfOsiCircuitStateChanges | 0 | 0 | This is the number of times the circuit goes from down to up or from up to down. |
1.3.6.1.4.1.18.3.5.6.3.1.27 | wfOsiCircuitAdjStateChanges | 0 | 0 | This is the number of times an adjacency off of this circuit goes from down to up or from up to down state. |
1.3.6.1.4.1.18.3.5.6.3.1.28 | wfOsiCircuitInitFailures | 0 | 0 | This is the number of times this circuit fails to initialize. |
1.3.6.1.4.1.18.3.5.6.3.1.29 | wfOsiCircuitRejectedAdjs | 0 | 0 | This is the number of Adjacencies that were rejected on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.30 | wfOsiCircuitReceivedBadLsps | 0 | 0 | This is the number of bad Lsps received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.31 | wfOsiCircuitReceivedBadSnps | 0 | 0 | This is the number of BAD Sequence Number Pdus received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.32 | wfOsiCircuitReceivedBadEshs | 0 | 0 | This is the number of bad ESHs received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.33 | wfOsiCircuitReceivedBadL1Iihs | 0 | 0 | This is the number of bad L1 IIHs received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.34 | wfOsiCircuitReceivedBadL2Iihs | 0 | 0 | This is the number of bad L2 IIHs received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.35 | wfOsiCircuitL1DrChanges | 0 | 0 | This is the number of times the L1 Designated Router has been elected on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.36 | wfOsiCircuitL2DrChanges | 0 | 0 | This is the number of times the L2 Designated Router has been elected on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.37 | wfOsiCircuitClnpForwarding | 0 | 0 | This shows whether forwarding is enabled over this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.38 | wfOsiCircuitClnpDefaultLifeTime | 0 | 0 | This is the lifetime included in clnp pdus generated by this router (i.e. echo and echo reply pdus, error report pdus). |
1.3.6.1.4.1.18.3.5.6.3.1.39 | wfOsiCircuitClnpInReceives | 0 | 0 | This is the number of CLNP pdus received from this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.40 | wfOsiCircuitClnpInAddrErrors | 0 | 0 | This is the number of CLNP pdus recived from this circuit with Address format errors. |
1.3.6.1.4.1.18.3.5.6.3.1.41 | wfOsiCircuitClnpForwPdus | 0 | 0 | This is the number of Clnp PDUs received on this circuit that are forwarded. |
1.3.6.1.4.1.18.3.5.6.3.1.42 | wfOsiCircuitClnpInUnknownNlps | 0 | 0 | This is the number of Clnp PDUs received on this circuit where the network layer addressed is unknown (Bad NLPID). |
1.3.6.1.4.1.18.3.5.6.3.1.43 | wfOsiCircuitClnpInDelivers | 0 | 0 | This is the number of Clnp PDUs received on this circuit whose destination is this router. |
1.3.6.1.4.1.18.3.5.6.3.1.44 | wfOsiCircuitClnpInUnknownUlps | 0 | 0 | This is number of Clnp PDUs received on this circuit addressed to this router where the upper layer is unknown. |
1.3.6.1.4.1.18.3.5.6.3.1.45 | wfOsiCircuitClnpSegCreates | 0 | 0 | This is the number of CLNP segments created from pdus received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.46 | wfOsiCircuitClnpInOpts | 0 | 0 | This is the number of CLNP pdus received with an options portion. |
1.3.6.1.4.1.18.3.5.6.3.1.47 | wfOsiCircuitClnpOutOpts | 0 | 0 | This is the number of CLNP pdus sent with an options portion. |
1.3.6.1.4.1.18.3.5.6.3.1.48 | wfOsiCircuitEsisEshIns | 0 | 0 | This is the number of ESHs received from this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.49 | wfOsiCircuitEsisIshOuts | 0 | 0 | This is the number of ISHs sent out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.50 | wfOsiCircuitEsisRduOuts | 0 | 0 | This is the number of Redirects sent out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.51 | wfOsiCircuitL1DesignatedRouter | 0 | 0 | This is the ID of the L1 Designated Router on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.52 | wfOsiCircuitL2DesignatedRouter | 0 | 0 | This is the ID of the L2 Designated Router on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.53 | wfOsiCircuitClnpOutEchoReplies | 0 | 0 | This is the number of CLNP Echo Replies sent out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.54 | wfOsiCircuitClnpOutEchoRequests | 0 | 0 | This is the number of Clnp Echo Requests sent out this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.55 | wfOsiCircuitClnpInEchoReplies | 0 | 0 | This is the number of CLNP Echo Replies received on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.56 | wfOsiCircuitClnpInEchoRequests | 0 | 0 | This is the number of CLNP Echo Requests recived on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.57 | wfOsiCircuitNumDynEsAdjs | 0 | 0 | This is the number of Dynamic End System Adjacencies formed on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.58 | wfOsiCircuitNumDynL1Adjs | 0 | 0 | This is the number of Dynamic Level 1 Intermediate System Adjacencies formed on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.59 | wfOsiCircuitNumDynL2Adjs | 0 | 0 | This is the number of Dynamic Level 2 Intermediate System Adjacencies formed on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.60 | wfOsiCircuitNumDynPtpIsAdjs | 0 | 0 | This is the number of Dynamic Intermediate System Point-to-Point Adjacencies formed on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.61 | wfOsiCircuitNumDynPtpEsAdjs | 0 | 0 | This is the number of Dynamic End System Point-to-Point Adjaciences formed on this circuit. |
1.3.6.1.4.1.18.3.5.6.3.1.62 | wfOsiCircuitBadIshReceived | 0 | 0 | This is the number of bad Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point circ… |
1.3.6.1.4.1.18.3.5.6.3.1.63 | wfOsiCircuitEsisIshIns | 0 | 0 | This is the number of good Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point cir… |
1.3.6.1.4.1.18.3.5.6.3.1.64 | wfOsiCircuitIihHoldMultiplier | 0 | 0 | This is the multiplier value used to compute the hold time set in the IIH PDUs transmitted from this router. Hold time equals IIH… |
1.3.6.1.4.1.18.3.5.6.3.1.66 | wfOsiCircuitDisableRedirect | 0 | 0 | Allow Redirects to be disabled. This is required when operating over Frame Relay in group mode in a partial mesh topology. |