Receive (Backward) Sustainable Cell Rate in cells/second. This
specifies the upper bound on the conforming average rate of an
ATM connection, where 'average rate' is the number of cells
transmitted divided by the 'duration of the connection'.
Parsed from file mpls_mlm.mib.txt
Company: None
Module: Wellfleet-MPLS-MLM-MIB
Receive (Backward) Sustainable Cell Rate in cells/second. This
specifies the upper bound on the conforming average rate of an
ATM connection, where 'average rate' is the number of cells
transmitted divided by the 'duration of the connection'.
Parsed from file Wellfleet-MPLS-MLM-MIB.mib
Module: Wellfleet-MPLS-MLM-MIB
Vendor: Wellfleet
Module: Wellfleet-MPLS-MLM-MIB
[Automatically extracted from oidview.com]
wfMplsAtmVclRcvSustainableCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'." ::= { wfMplsAtmVclEntry 14 }
wfMplsAtmVclRcvSustainableCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-only STATUS mandatory DESCRIPTION "Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'." ::= { wfMplsAtmVclEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.1 | wfMplsAtmVclLineNumber | 0 | 0 | Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.2 | wfMplsAtmVclVpi | 0 | 0 | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVpiBits. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.3 | wfMplsAtmVclVci | 0 | 0 | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVciBits. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.4 | wfMplsAtmVclLdpIndex | 0 | 0 | Uniquely identifies the LDP session number in this interface. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.5 | wfMplsAtmVclDirection | 0 | 0 | The direction of LSP |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.6 | wfMplsAtmVclState | 0 | 0 | The VC state. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.7 | wfMplsAtmVclType | 0 | 0 | default VC or normal LSP VC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.8 | wfMplsAtmVclLastChange | 0 | 0 | The value of MIBII's sysUpTime at the time this VCL entered its current operational state. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.9 | wfMplsAtmVclXmtPeakCellRate | 0 | 0 | Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.10 | wfMplsAtmVclXmtSustainableCellRate | 0 | 0 | Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.11 | wfMplsAtmVclXmtBurstSize | 0 | 0 | Transmit (Forward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.12 | wfMplsAtmVclXmtQosClass | 0 | 0 | Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.13 | wfMplsAtmVclRcvPeakCellRate | 0 | 0 | Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.15 | wfMplsAtmVclRcvBurstSize | 0 | 0 | Receive (Backward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.16 | wfMplsAtmVclRcvQosClass | 0 | 0 | Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.17 | wfMplsAtmVclAalType | 0 | 0 | The type of AAL used on the VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.18 | wfMplsAtmVclAalCpcsTransmitSduSize | 0 | 0 | The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.19 | wfMplsAtmVclAalCpcsReceiveSduSize | 0 | 0 | The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.20 | wfMplsAtmVclAalEncapsType | 0 | 0 | The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAP… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.21 | wfMplsAtmVclCongestionIndication | 0 | 0 | The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.22 | wfMplsAtmVclCellLossPriority | 0 | 0 | The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.23 | wfMplsAtmVclXmtTagging | 0 | 0 | Tagging forward VC messages if peak/sustainable rates exceeded |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.24 | wfMplsAtmVclRcvTagging | 0 | 0 | Tagging backward VC messages if peak/sustainable rates exceeded |