The type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_VCLENCAPS_LLCENCAPS - RFC1483
ATM_VCLENCAPS_ROUTEDPROTO - NONE
Parsed from file mpls_mlm.mib.txt
Company: None
Module: Wellfleet-MPLS-MLM-MIB
The type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_VCLENCAPS_LLCENCAPS - RFC1483
ATM_VCLENCAPS_ROUTEDPROTO - NONE
Parsed from file Wellfleet-MPLS-MLM-MIB.mib
Module: Wellfleet-MPLS-MLM-MIB
Vendor: Wellfleet
Module: Wellfleet-MPLS-MLM-MIB
[Automatically extracted from oidview.com]
wfMplsAtmVclAalEncapsType OBJECT-TYPE SYNTAX INTEGER { unknown(1), llcencaps(2), null(3), other(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLENCAPS_ROUTEDPROTO - NONE" ::= { wfMplsAtmVclEntry 20 }
wfMplsAtmVclAalEncapsType OBJECT-TYPE SYNTAX INTEGER { unknown(1), llcencaps(2), null(3), other(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLENCAPS_ROUTEDPROTO - NONE" ::= { wfMplsAtmVclEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.1 | wfMplsAtmVclLineNumber | 0 | 0 | Uniquely identifies the interface (port) that contains the appropriate management information. We use line number here. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.2 | wfMplsAtmVclVpi | 0 | 0 | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVpiBits. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.3 | wfMplsAtmVclVci | 0 | 0 | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the wfMplsAtmInterfaceMaxActiveVciBits. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.4 | wfMplsAtmVclLdpIndex | 0 | 0 | Uniquely identifies the LDP session number in this interface. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.5 | wfMplsAtmVclDirection | 0 | 0 | The direction of LSP |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.6 | wfMplsAtmVclState | 0 | 0 | The VC state. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.7 | wfMplsAtmVclType | 0 | 0 | default VC or normal LSP VC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.8 | wfMplsAtmVclLastChange | 0 | 0 | The value of MIBII's sysUpTime at the time this VCL entered its current operational state. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.9 | wfMplsAtmVclXmtPeakCellRate | 0 | 0 | Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.10 | wfMplsAtmVclXmtSustainableCellRate | 0 | 0 | Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.11 | wfMplsAtmVclXmtBurstSize | 0 | 0 | Transmit (Forward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.12 | wfMplsAtmVclXmtQosClass | 0 | 0 | Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.13 | wfMplsAtmVclRcvPeakCellRate | 0 | 0 | Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.14 | wfMplsAtmVclRcvSustainableCellRate | 0 | 0 | Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM… |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.15 | wfMplsAtmVclRcvBurstSize | 0 | 0 | Receive (Backward) Burst Size in cells. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.16 | wfMplsAtmVclRcvQosClass | 0 | 0 | Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.17 | wfMplsAtmVclAalType | 0 | 0 | The type of AAL used on the VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.18 | wfMplsAtmVclAalCpcsTransmitSduSize | 0 | 0 | The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.19 | wfMplsAtmVclAalCpcsReceiveSduSize | 0 | 0 | The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.21 | wfMplsAtmVclCongestionIndication | 0 | 0 | The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.22 | wfMplsAtmVclCellLossPriority | 0 | 0 | The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL. |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.23 | wfMplsAtmVclXmtTagging | 0 | 0 | Tagging forward VC messages if peak/sustainable rates exceeded |
| 1.3.6.1.4.1.18.3.5.9.16.1.5.1.24 | wfMplsAtmVclRcvTagging | 0 | 0 | Tagging backward VC messages if peak/sustainable rates exceeded |