This is the reserve bandwidth slot.
When lines are requested to be added to the Multilink bundle
this parameter denotes the slot which is asked if the preferred
slot can not provide a line.
Parsed from file ppp.mib.txt
Company: None
Module: Wellfleet-PPP-MIB
This is the reserve bandwidth slot.
When lines are requested to be added to the Multilink bundle
this parameter denotes the slot which is asked if the preferred
slot can not provide a line.
Parsed from file Wellfleet-PPP-MIB.mib
Module: Wellfleet-PPP-MIB
Vendor: Wellfleet
Module: Wellfleet-PPP-MIB
[Automatically extracted from oidview.com]
wfPppCircuitResvBwSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the reserve bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slot which is asked if the preferred slot can not provide a line." ::= { wfPppCircuitEntry 56 }
wfPppCircuitResvBwSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the reserve bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slot which is asked if the preferred slot can not provide a line." ::= { wfPppCircuitEntry 56 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.2.2.1.1 | wfPppCircuitDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.2 | wfPppCircuitState | 0 | 0 | PPP state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.3 | wfPppCircuitIpcpCurrentState | 0 | 0 | the current state of the IPCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.4 | wfPppCircuitOsinlcpCurrentState | 0 | 0 | the current state of the OSINLCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.5 | wfPppCircuitXnscpCurrentState | 0 | 0 | the current state of the XNSCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.6 | wfPppCircuitDncpCurrentState | 0 | 0 | the current state of the DNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.7 | wfPppCircuitAtcpCurrentState | 0 | 0 | the current state of the ATCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.8 | wfPppCircuitIpxcpCurrentState | 0 | 0 | the current state of the IPXCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.9 | wfPppCircuitBncpCurrentState | 0 | 0 | the current state of the BNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.10 | wfPppCircuitVncpCurrentState | 0 | 0 | the current state of the VNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.11 | wfPppCircuitID | 0 | 0 | cct number for this instance |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.12 | wfPppCircuitIpDisable | 0 | 0 | enable/disable IP Protocol - disabling generates a Close event to the IPCP FSM and consequently disallows IP traffic on this circ… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.13 | wfPppCircuitOsinlDisable | 0 | 0 | enable/disable OSI Network Layer Protocol - disabling generates a Close event to the OSINLCP FSM and consequently disallows OSI t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.14 | wfPppCircuitXnsDisable | 0 | 0 | enable/disable XNS Protocol - disabling generates a Close event to the XNSCP FSM and consequently disallows XNS traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.15 | wfPppCircuitDecnetDisable | 0 | 0 | enable/disable DECnet Protocol - disabling generates a Close event to the DNCP FSM and consequently disallows DECnet traffic on t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.16 | wfPppCircuitAppletalkDisable | 0 | 0 | enable/disable AppleTalk Protocol - disabling generates a Close event to the ATCP FSM and consequently disallows AppleTalk traffi… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.17 | wfPppCircuitIpxDisable | 0 | 0 | enable/disable IPX Protocol - disabling generates a Close event to the IPXCP FSM and consequently disallows IPX traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.18 | wfPppCircuitBridgeDisable | 0 | 0 | enable/disable the Bridge - disabling generates a Close event to the BNCP FSM and consequently disallows bridge traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.19 | wfPppCircuitVinesDisable | 0 | 0 | enable/disable Vines Protocol - disabling generates a Close event to the VNCP FSM and consequently disallows Vines traffic on thi… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.20 | wfPppCircuitCfgLocalIpAddr | 0 | 0 | the IP address we're going to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.21 | wfPppCircuitLocalIpAddr | 0 | 0 | the IP address our peer wants us to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.22 | wfPppCircuitCfgRemoteIpAddr | 0 | 0 | the IP address we want our peer to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.23 | wfPppCircuitRemoteIpAddr | 0 | 0 | the IP address our peer wants to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.24 | wfPppCircuitCfgIpxNetworkNumber | 0 | 0 | the configured IPX Network Number to be used by both us and our peer |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.25 | wfPppCircuitIpxNetworkNumber | 0 | 0 | the result of IPX Network Number negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.26 | wfPppCircuitIpxRemoteNodeNumber | 0 | 0 | this is what we'll tell our peer to use for node number if it sends us a 0 |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.27 | wfPppCircuitCfgIpxRoutingProtocol | 0 | 0 | the desired IPX Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.28 | wfPppCircuitIpxRoutingProtocol | 0 | 0 | the negotiated IPX Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.29 | wfPppCircuitLocalIpxRouterName | 0 | 0 | our IPX Router Name |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.30 | wfPppCircuitRemoteIpxRouterName | 0 | 0 | our peer's IPX Router Name |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.31 | wfPppCircuitIpxConfigComplete | 0 | 0 | indicates whether or not IPXCP converged on all required options |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.32 | wfPppCircuitCfgAtNetwork | 0 | 0 | the configured AppleTalk network number - our peer must use the same number |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.33 | wfPppCircuitAtNetwork | 0 | 0 | the AppleTalk network number we agreed to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.34 | wfPppCircuitCfgLocalAtNode | 0 | 0 | the AppleTalk node number we're configured to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.35 | wfPppCircuitLocalAtNode | 0 | 0 | our AppleTalk node number after negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.36 | wfPppCircuitCfgRemoteAtNode | 0 | 0 | the AppleTalk node number we want our peer to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.37 | wfPppCircuitRemoteAtNode | 0 | 0 | our peer's AppleTalk node number after negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.38 | wfPppCircuitCfgAtRoutingProtocol | 0 | 0 | the desired AppleTalk Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.39 | wfPppCircuitAtRoutingProtocol | 0 | 0 | the negotiated AppleTalk Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.40 | wfPppCircuitCfgBridgeEnet | 0 | 0 | allow/disallow Ethernet bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.41 | wfPppCircuitBridgeEnet | 0 | 0 | result of bridge MAC type negotiation for Ethernet |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.42 | wfPppCircuitCfgBridgeFddi | 0 | 0 | allow/disallow FDDI bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.43 | wfPppCircuitBridgeFddi | 0 | 0 | result of bridge MAC type negotiation for FDDI |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.44 | wfPppCircuitCfgBridgeTokenRing | 0 | 0 | allow/disallow Token Ring bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.45 | wfPppCircuitBridgeTokenRing | 0 | 0 | result of bridge MAC type negotiation for Token Ring |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.46 | wfPppCircuitBadPackets | 0 | 0 | these are packets not in correct PPP format |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.47 | wfPppCircuitLastBadPacket | 0 | 0 | this is the first 16 bytes of the last bad packet we received |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.48 | wfPppCircuitCcpCurrentState | 0 | 0 | the current state of the CCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.49 | wfPppCircuitCcpDisable | 0 | 0 | enable/disable compression - disabling generates a Close event to the CCP FSM and consequently disallows compression traffic on t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.50 | wfPppCircuitPppMode | 0 | 0 | Pre 9.0 multilines can only negotiate LCP over 1 line. The exact line which LCP will occur on is unknown. So in order to handle t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.51 | wfPppCircuitMLFragPerm | 0 | 0 | This parameter allows interoperability with PPP Multilink implementations which do not allow fragmentation. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.52 | wfPppCircuitExamPeriod | 0 | 0 | This indicates the interval that the Multilink bundle should be polled for possible congestion. This value is in tenths of a sec… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.53 | wfPppCircuitFullThreshold | 0 | 0 | This is the percentage of the theoretical maximum line throughput that must be reached or exceeded before the line is considered … |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.54 | wfPppCircuitPeriodsCng | 0 | 0 | This is the number of consecutive periods where the line throughput is above the congestion threshold required to declare the lin… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.55 | wfPppCircuitPrefBwSlot | 0 | 0 | This is the preferred bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slo… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.57 | wfPppCircuitMLFragTriggerSize | 0 | 0 | This is the minimum size of a packet of which Multilink will fragment. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.58 | wfPppCircuitMaxLinks | 0 | 0 | This is the maximum number of links allowed in the Multilink bundle for this circuit at any one time. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.59 | wfPppCircuitRecoverThreshold | 0 | 0 | This is the recovery threshold expressed as a percentage of the theoretical maximum bundle throughput. The actual throughput mu… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.60 | wfPppCircuitPeriodsUnCng | 0 | 0 | This parameter is used for recovery. Once a Multilink bundle has been declared as congested, this is the number of consecutive ex… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.61 | wfPppCircuitHistory | 0 | 0 | DEBUG parameter - This is the BOD history buffer. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.62 | wfPppCircuitDebugFlag | 0 | 0 | DEBUG parameter - This is the BOD Debug flag, used to control debug code for BOD. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.63 | wfPppCircuitActualMode | 0 | 0 | This attribute is the actual ppp mode of the circuit after LCP has negotiated. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.64 | wfPppCircuitMaxBuffers | 0 | 0 | This is the maximum number of stored buffers allowed in the Multilink Receive logic for this circuit at any one time. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.65 | wfPppCircuitLinksConfigured | 0 | 0 | This is the current number of lines configured for this Multilink circuit. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.66 | wfPppCircuitBacpDisable | 0 | 0 | enable/disable BACP Protocol - disabling generates a Close event to the BACP FSM and consequently disallows BAP traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.67 | wfPppCircuitBacpCurrentState | 0 | 0 | the current state of the BACP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.68 | wfPppCircuitBacpNoPhoneNum | 0 | 0 | enable/disable sending of the No-Phone-Number-Needed option in BACP Call Request packets |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.69 | wfPppCircuitIpv6Disable | 0 | 0 | enable/disable IPv6 Protocol - disabling generates a Close event to the IPv6CP FSM and consequently disallows IPv6 traffic on thi… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.70 | wfPppCircuitIpv6CurrentState | 0 | 0 | the current state of the Ipv6 Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.71 | wfPppCircuitCcpType | 0 | 0 | Specifies whether to use CCP or Individual Link CCP |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.72 | wfPppCircuitCfgCcpOptions | 0 | 0 | Specifies the compression protocol options in 1st config-request |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.73 | wfPppCircuitCcpOptions | 0 | 0 | The negotiated compression protocol option |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.74 | wfPppCircuitStacLZSCheckMode | 0 | 0 | Specifies the check mode for STAC LZS compression protocol. See RFC 1974 for more information. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.75 | wfPppCircuitMLFragStrict | 0 | 0 | enable/disable strict fragmentation algorithm i.e. fragmenting a packet when its size exceeds the threshold regardless of what t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.76 | wfPppCircuitLampreyCompDisable | 0 | 0 | enable/disable hardware compression, either from the compression daugther card on the Lamprey or the old compression daugther int… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.77 | wfPppCircuitMsgLevel | 0 | 0 | PPP Circuit log messages level. To control level of log messages DBG_MSG_ALL 0x001f0000 - 2031616 DBG_MSG_DEBUG 0x00… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.78 | wfPppCircuitType | 0 | 0 | To differentiate between a Dial Up PPP circuit from L2TP and Leased Line |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.79 | wfPppCircuitWRCompatability | 0 | 0 | Enable WebRanger compatability that allows us to accept a config-ack after receiving an invalid config-req |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.80 | wfPppCircuitMLPrioq | 0 | 0 | Enable to allow Protocol Priority to prioritize PPP multilink packets. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.81 | wfPppCircuitLampreySlotDelay | 0 | 0 | Number of seconds this slot waits for the Lamprey slot to create the Multilink gate. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.82 | wfPppCircuitMLMCEnable | 0 | 0 | enable/disable Multilink Multiclass for this circuit. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.83 | wfPppCircuitMLMCConfNumClasses | 0 | 0 | the configured maximum number of classes for this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.84 | wfPppCircuitMLMCRcvNumClasses | 0 | 0 | the number of receive classes negotiated with the peer for this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.85 | wfPppCircuitMLMCXmtNumClasses | 0 | 0 | the number of suspendable transmit classes negotiated with the peer for this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.86 | wfPppCircuitMLMCDebugLevel | 0 | 0 | Level of debug log messaging requested for Multilink Multiclass, 1 is disabled |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.87 | wfPppCircuitMLMCState | 0 | 0 | PPP MultiClass state variable, Init, Down, Up |