This is the maximum number of links allowed in the Multilink
bundle for this circuit at any one time.
Parsed from file ppp.mib.txt
Company: None
Module: Wellfleet-PPP-MIB
This is the maximum number of links allowed in the Multilink
bundle for this circuit at any one time.
Parsed from file Wellfleet-PPP-MIB.mib
Module: Wellfleet-PPP-MIB
Vendor: Wellfleet
Module: Wellfleet-PPP-MIB
[Automatically extracted from oidview.com]
wfPppCircuitMaxLinks OBJECT-TYPE SYNTAX INTEGER(0..4) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of links allowed in the Multilink bundle for this circuit at any one time." DEFVAL { 4 } ::= { wfPppCircuitEntry 58 }
wfPppCircuitMaxLinks OBJECT-TYPE SYNTAX INTEGER(0..4) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of links allowed in the Multilink bundle for this circuit at any one time." DEFVAL { 4 } ::= { wfPppCircuitEntry 58 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.2.2.1.1 | wfPppCircuitDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.2 | wfPppCircuitState | 0 | 0 | PPP state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.3 | wfPppCircuitIpcpCurrentState | 0 | 0 | the current state of the IPCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.4 | wfPppCircuitOsinlcpCurrentState | 0 | 0 | the current state of the OSINLCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.5 | wfPppCircuitXnscpCurrentState | 0 | 0 | the current state of the XNSCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.6 | wfPppCircuitDncpCurrentState | 0 | 0 | the current state of the DNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.7 | wfPppCircuitAtcpCurrentState | 0 | 0 | the current state of the ATCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.8 | wfPppCircuitIpxcpCurrentState | 0 | 0 | the current state of the IPXCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.9 | wfPppCircuitBncpCurrentState | 0 | 0 | the current state of the BNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.10 | wfPppCircuitVncpCurrentState | 0 | 0 | the current state of the VNCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.11 | wfPppCircuitID | 0 | 0 | cct number for this instance |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.12 | wfPppCircuitIpDisable | 0 | 0 | enable/disable IP Protocol - disabling generates a Close event to the IPCP FSM and consequently disallows IP traffic on this circ… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.13 | wfPppCircuitOsinlDisable | 0 | 0 | enable/disable OSI Network Layer Protocol - disabling generates a Close event to the OSINLCP FSM and consequently disallows OSI t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.14 | wfPppCircuitXnsDisable | 0 | 0 | enable/disable XNS Protocol - disabling generates a Close event to the XNSCP FSM and consequently disallows XNS traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.15 | wfPppCircuitDecnetDisable | 0 | 0 | enable/disable DECnet Protocol - disabling generates a Close event to the DNCP FSM and consequently disallows DECnet traffic on t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.16 | wfPppCircuitAppletalkDisable | 0 | 0 | enable/disable AppleTalk Protocol - disabling generates a Close event to the ATCP FSM and consequently disallows AppleTalk traffi… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.17 | wfPppCircuitIpxDisable | 0 | 0 | enable/disable IPX Protocol - disabling generates a Close event to the IPXCP FSM and consequently disallows IPX traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.18 | wfPppCircuitBridgeDisable | 0 | 0 | enable/disable the Bridge - disabling generates a Close event to the BNCP FSM and consequently disallows bridge traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.19 | wfPppCircuitVinesDisable | 0 | 0 | enable/disable Vines Protocol - disabling generates a Close event to the VNCP FSM and consequently disallows Vines traffic on thi… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.20 | wfPppCircuitCfgLocalIpAddr | 0 | 0 | the IP address we're going to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.21 | wfPppCircuitLocalIpAddr | 0 | 0 | the IP address our peer wants us to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.22 | wfPppCircuitCfgRemoteIpAddr | 0 | 0 | the IP address we want our peer to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.23 | wfPppCircuitRemoteIpAddr | 0 | 0 | the IP address our peer wants to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.24 | wfPppCircuitCfgIpxNetworkNumber | 0 | 0 | the configured IPX Network Number to be used by both us and our peer |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.25 | wfPppCircuitIpxNetworkNumber | 0 | 0 | the result of IPX Network Number negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.26 | wfPppCircuitIpxRemoteNodeNumber | 0 | 0 | this is what we'll tell our peer to use for node number if it sends us a 0 |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.27 | wfPppCircuitCfgIpxRoutingProtocol | 0 | 0 | the desired IPX Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.28 | wfPppCircuitIpxRoutingProtocol | 0 | 0 | the negotiated IPX Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.29 | wfPppCircuitLocalIpxRouterName | 0 | 0 | our IPX Router Name |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.30 | wfPppCircuitRemoteIpxRouterName | 0 | 0 | our peer's IPX Router Name |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.31 | wfPppCircuitIpxConfigComplete | 0 | 0 | indicates whether or not IPXCP converged on all required options |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.32 | wfPppCircuitCfgAtNetwork | 0 | 0 | the configured AppleTalk network number - our peer must use the same number |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.33 | wfPppCircuitAtNetwork | 0 | 0 | the AppleTalk network number we agreed to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.34 | wfPppCircuitCfgLocalAtNode | 0 | 0 | the AppleTalk node number we're configured to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.35 | wfPppCircuitLocalAtNode | 0 | 0 | our AppleTalk node number after negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.36 | wfPppCircuitCfgRemoteAtNode | 0 | 0 | the AppleTalk node number we want our peer to use |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.37 | wfPppCircuitRemoteAtNode | 0 | 0 | our peer's AppleTalk node number after negotiation |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.38 | wfPppCircuitCfgAtRoutingProtocol | 0 | 0 | the desired AppleTalk Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.39 | wfPppCircuitAtRoutingProtocol | 0 | 0 | the negotiated AppleTalk Routing Protocol to be used on the link |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.40 | wfPppCircuitCfgBridgeEnet | 0 | 0 | allow/disallow Ethernet bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.41 | wfPppCircuitBridgeEnet | 0 | 0 | result of bridge MAC type negotiation for Ethernet |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.42 | wfPppCircuitCfgBridgeFddi | 0 | 0 | allow/disallow FDDI bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.43 | wfPppCircuitBridgeFddi | 0 | 0 | result of bridge MAC type negotiation for FDDI |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.44 | wfPppCircuitCfgBridgeTokenRing | 0 | 0 | allow/disallow Token Ring bridged frames |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.45 | wfPppCircuitBridgeTokenRing | 0 | 0 | result of bridge MAC type negotiation for Token Ring |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.46 | wfPppCircuitBadPackets | 0 | 0 | these are packets not in correct PPP format |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.47 | wfPppCircuitLastBadPacket | 0 | 0 | this is the first 16 bytes of the last bad packet we received |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.48 | wfPppCircuitCcpCurrentState | 0 | 0 | the current state of the CCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.49 | wfPppCircuitCcpDisable | 0 | 0 | enable/disable compression - disabling generates a Close event to the CCP FSM and consequently disallows compression traffic on t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.50 | wfPppCircuitPppMode | 0 | 0 | Pre 9.0 multilines can only negotiate LCP over 1 line. The exact line which LCP will occur on is unknown. So in order to handle t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.51 | wfPppCircuitMLFragPerm | 0 | 0 | This parameter allows interoperability with PPP Multilink implementations which do not allow fragmentation. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.52 | wfPppCircuitExamPeriod | 0 | 0 | This indicates the interval that the Multilink bundle should be polled for possible congestion. This value is in tenths of a sec… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.53 | wfPppCircuitFullThreshold | 0 | 0 | This is the percentage of the theoretical maximum line throughput that must be reached or exceeded before the line is considered … |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.54 | wfPppCircuitPeriodsCng | 0 | 0 | This is the number of consecutive periods where the line throughput is above the congestion threshold required to declare the lin… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.55 | wfPppCircuitPrefBwSlot | 0 | 0 | This is the preferred bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slo… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.56 | wfPppCircuitResvBwSlot | 0 | 0 | This is the reserve bandwidth slot. When lines are requested to be added to the Multilink bundle this parameter denotes the slot … |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.57 | wfPppCircuitMLFragTriggerSize | 0 | 0 | This is the minimum size of a packet of which Multilink will fragment. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.59 | wfPppCircuitRecoverThreshold | 0 | 0 | This is the recovery threshold expressed as a percentage of the theoretical maximum bundle throughput. The actual throughput mu… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.60 | wfPppCircuitPeriodsUnCng | 0 | 0 | This parameter is used for recovery. Once a Multilink bundle has been declared as congested, this is the number of consecutive ex… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.61 | wfPppCircuitHistory | 0 | 0 | DEBUG parameter - This is the BOD history buffer. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.62 | wfPppCircuitDebugFlag | 0 | 0 | DEBUG parameter - This is the BOD Debug flag, used to control debug code for BOD. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.63 | wfPppCircuitActualMode | 0 | 0 | This attribute is the actual ppp mode of the circuit after LCP has negotiated. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.64 | wfPppCircuitMaxBuffers | 0 | 0 | This is the maximum number of stored buffers allowed in the Multilink Receive logic for this circuit at any one time. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.65 | wfPppCircuitLinksConfigured | 0 | 0 | This is the current number of lines configured for this Multilink circuit. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.66 | wfPppCircuitBacpDisable | 0 | 0 | enable/disable BACP Protocol - disabling generates a Close event to the BACP FSM and consequently disallows BAP traffic on this c… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.67 | wfPppCircuitBacpCurrentState | 0 | 0 | the current state of the BACP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.68 | wfPppCircuitBacpNoPhoneNum | 0 | 0 | enable/disable sending of the No-Phone-Number-Needed option in BACP Call Request packets |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.69 | wfPppCircuitIpv6Disable | 0 | 0 | enable/disable IPv6 Protocol - disabling generates a Close event to the IPv6CP FSM and consequently disallows IPv6 traffic on thi… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.70 | wfPppCircuitIpv6CurrentState | 0 | 0 | the current state of the Ipv6 Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.71 | wfPppCircuitCcpType | 0 | 0 | Specifies whether to use CCP or Individual Link CCP |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.72 | wfPppCircuitCfgCcpOptions | 0 | 0 | Specifies the compression protocol options in 1st config-request |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.73 | wfPppCircuitCcpOptions | 0 | 0 | The negotiated compression protocol option |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.74 | wfPppCircuitStacLZSCheckMode | 0 | 0 | Specifies the check mode for STAC LZS compression protocol. See RFC 1974 for more information. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.75 | wfPppCircuitMLFragStrict | 0 | 0 | enable/disable strict fragmentation algorithm i.e. fragmenting a packet when its size exceeds the threshold regardless of what t… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.76 | wfPppCircuitLampreyCompDisable | 0 | 0 | enable/disable hardware compression, either from the compression daugther card on the Lamprey or the old compression daugther int… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.77 | wfPppCircuitMsgLevel | 0 | 0 | PPP Circuit log messages level. To control level of log messages DBG_MSG_ALL 0x001f0000 - 2031616 DBG_MSG_DEBUG 0x00… |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.78 | wfPppCircuitType | 0 | 0 | To differentiate between a Dial Up PPP circuit from L2TP and Leased Line |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.79 | wfPppCircuitWRCompatability | 0 | 0 | Enable WebRanger compatability that allows us to accept a config-ack after receiving an invalid config-req |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.80 | wfPppCircuitMLPrioq | 0 | 0 | Enable to allow Protocol Priority to prioritize PPP multilink packets. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.81 | wfPppCircuitLampreySlotDelay | 0 | 0 | Number of seconds this slot waits for the Lamprey slot to create the Multilink gate. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.82 | wfPppCircuitMLMCEnable | 0 | 0 | enable/disable Multilink Multiclass for this circuit. |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.83 | wfPppCircuitMLMCConfNumClasses | 0 | 0 | the configured maximum number of classes for this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.84 | wfPppCircuitMLMCRcvNumClasses | 0 | 0 | the number of receive classes negotiated with the peer for this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.85 | wfPppCircuitMLMCXmtNumClasses | 0 | 0 | the number of suspendable transmit classes negotiated with the peer for this circuit |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.86 | wfPppCircuitMLMCDebugLevel | 0 | 0 | Level of debug log messaging requested for Multilink Multiclass, 1 is disabled |
| 1.3.6.1.4.1.18.3.5.9.2.2.1.87 | wfPppCircuitMLMCState | 0 | 0 | PPP MultiClass state variable, Init, Down, Up |