C22 Path Switching Delay. The time (seconds) since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol.
Parsed from file atm_le.mib.txt
Company: None
Module: Wellfleet-ATM-LE-MIB
C22 Path Switching Delay. The time (seconds) since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol.
Parsed from file Wellfleet-ATM-LE-MIB.mib
Module: Wellfleet-ATM-LE-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-LE-MIB
[Automatically extracted from oidview.com]
wflecPathSwitchingDelay OBJECT-TYPE SYNTAX INTEGER(1..8) ACCESS read-write STATUS mandatory DESCRIPTION "C22 Path Switching Delay. The time (seconds) since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered to the recipient. May be used to bypass the Flush protocol." DEFVAL { 6 } ::= { wfAtmLecConfigEntry 19 }
wflecPathSwitchingDelay OBJECT-TYPE SYNTAX INTEGER(1..8) ACCESS read-write STATUS mandatory DESCRIPTION "C22 Path Switching Delay. The time (seconds) since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered to the recipient. May be used to bypass the Flush protocol." DEFVAL { 6 } ::= { wfAtmLecConfigEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.1 | wflecConfDelete | 0 | 0 | Indication to create or delete an ATM LE Client Config Entry from the MIB |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.2 | wflecRowStatus | 0 | 0 | Indication to create or delete an ATM LE Client. This will remove the LEC from the Emulated LAN. However, the instance is not re… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.3 | wflecConfigCct | 0 | 0 | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.4 | wflecOwner | 0 | 0 | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.5 | wflecConfigMode | 0 | 0 | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.6 | wflecConfigLanType | 0 | 0 | C2 - LEC LAN Type The data frame format which this client will use the next time it returns to the Initial State. Auto-configuring… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.7 | wflecConfigMaxDataFrameSize | 0 | 0 | C3 Maximum Data Frame Size. The maximum data frame size which this client will use the next time it returns to the Initial State.… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.8 | wflecConfigLanName | 0 | 0 | C5 ELAN Name. The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.9 | wflecConfigLesAtmAddress | 0 | 0 | C9 LE Server ATM Address. The LAN Emulation Server which this client will use the next time it is started in manual configuration… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.10 | wflecControlTimeout | 0 | 0 | C7 Control Time-out. Time out period used for timing out most request/response control frame most request/response control frame … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.11 | wflecMaxUnknownFrameCount | 0 | 0 | C10 Maximum Unknown Frame Count. This parameter MUST be less than or equal to 10. (See parameter C11) |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.12 | wflecMaxUnknownFrameTime | 0 | 0 | C11 Maximum Unknown Frame Time. This parameter MUST be greater than or equal to 1.0 seconds. Within the period of time defined … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.13 | wflecVccTimeoutPeriod | 0 | 0 | C12 VCC Timeout Period. A LE Client may release any Data Direct or Multicast Send VCC that it has not used to transmit or receive… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.14 | wflecMaxRetryCount | 0 | 0 | C13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a given frame's LAN destination more than Maximum Retry Count t… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.15 | wflecAgingTime | 0 | 0 | C17 Aging Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verification of… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.16 | wflecForwardDelayTime | 0 | 0 | C18 Forward Delay Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verific… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.17 | wflecExpectedArpResponseTime | 0 | 0 | C20 Expected LE_ARP Reponse Time. The maximum time (seconds) that the LEC expects an LE_ARP_REQUEST/ LE_ARP_RESPONSE cycle to tak… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.18 | wflecFlushTimeOut | 0 | 0 | wflecFlushtimeOut |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.20 | wflecLocalSegmentID | 0 | 0 | C23 Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing b… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.21 | wflecMulticastSendType | 0 | 0 | C24 Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. T… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.22 | wflecMulticastSendAvgRate | 0 | 0 | C25 Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VC… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.23 | wflecMulticastSendPeakRate | 0 | 0 | C26 Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send V… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.24 | wflecConnectionCompleteTimer | 0 | 0 | C28 Connection Complete Timer. Optional. In Connection Establishment this is the time period in which data or a READY_IND message… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.25 | wflecFlushEnable | 0 | 0 | Flush Protocol enable/disable - ATM_LEC_FLUSH_ENABLED - ATM LE flush protocol is used when switching VCs. If the Flush timeout (w… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.26 | wflecConfigRetry | 0 | 0 | This attribute specifies how many retries should be attempted if any part of the config phase fails. The config phase starts wi… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.27 | wflecMulticastFwdTimeout | 0 | 0 | The attribute specifies how many seconds to wait for the Multicast Forward VC to be set up before retrying. The retry will incl… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.28 | wflecMulticastFwdRetry | 0 | 0 | The attribute specifies how many retries should be made to get the Multicast Forward VC setup. The LEC will retry after wflecMu… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.29 | wflecDebugLevel | 0 | 0 | Debug Levels - The level of debug desired from the Portable LEC code LEC_DBG_OFF - 0 LEC_DBG_WARN - 1 LEC_DBG_ERR - 2 LEC_DBG_MSG… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.30 | wflecConfigLECSAtmAddress | 0 | 0 | The LE Config Server Address to be used. If left (or set) to NULL_VAL the well-known LECS ATM address will be used. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.31 | wflecConfigV2Capable | 0 | 0 | Indication to enable or disable LANE V2 support for this ATM LE Client. |