The LE Config Server Address to be used. If left (or set) to NULL_VAL the
well-known LECS ATM address will be used.
Parsed from file atm_le.mib.txt
Company: None
Module: Wellfleet-ATM-LE-MIB
The LE Config Server Address to be used. If left (or set) to NULL_VAL the
well-known LECS ATM address will be used.
Parsed from file Wellfleet-ATM-LE-MIB.mib
Module: Wellfleet-ATM-LE-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-LE-MIB
[Automatically extracted from oidview.com]
wflecConfigLECSAtmAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The LE Config Server Address to be used. If left (or set) to NULL_VAL the well-known LECS ATM address will be used." ::= { wfAtmLecConfigEntry 30 }
wflecConfigLECSAtmAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The LE Config Server Address to be used. If left (or set) to NULL_VAL the well-known LECS ATM address will be used." ::= { wfAtmLecConfigEntry 30 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.1 | wflecConfDelete | 0 | 0 | Indication to create or delete an ATM LE Client Config Entry from the MIB |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.2 | wflecRowStatus | 0 | 0 | Indication to create or delete an ATM LE Client. This will remove the LEC from the Emulated LAN. However, the instance is not re… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.3 | wflecConfigCct | 0 | 0 | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.4 | wflecOwner | 0 | 0 | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.5 | wflecConfigMode | 0 | 0 | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.6 | wflecConfigLanType | 0 | 0 | C2 - LEC LAN Type The data frame format which this client will use the next time it returns to the Initial State. Auto-configuring… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.7 | wflecConfigMaxDataFrameSize | 0 | 0 | C3 Maximum Data Frame Size. The maximum data frame size which this client will use the next time it returns to the Initial State.… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.8 | wflecConfigLanName | 0 | 0 | C5 ELAN Name. The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.9 | wflecConfigLesAtmAddress | 0 | 0 | C9 LE Server ATM Address. The LAN Emulation Server which this client will use the next time it is started in manual configuration… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.10 | wflecControlTimeout | 0 | 0 | C7 Control Time-out. Time out period used for timing out most request/response control frame most request/response control frame … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.11 | wflecMaxUnknownFrameCount | 0 | 0 | C10 Maximum Unknown Frame Count. This parameter MUST be less than or equal to 10. (See parameter C11) |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.12 | wflecMaxUnknownFrameTime | 0 | 0 | C11 Maximum Unknown Frame Time. This parameter MUST be greater than or equal to 1.0 seconds. Within the period of time defined … |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.13 | wflecVccTimeoutPeriod | 0 | 0 | C12 VCC Timeout Period. A LE Client may release any Data Direct or Multicast Send VCC that it has not used to transmit or receive… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.14 | wflecMaxRetryCount | 0 | 0 | C13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a given frame's LAN destination more than Maximum Retry Count t… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.15 | wflecAgingTime | 0 | 0 | C17 Aging Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verification of… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.16 | wflecForwardDelayTime | 0 | 0 | C18 Forward Delay Time. The maximum time that a LE Client will maintain an entry in its LE-ARP cache in the absence of a verific… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.17 | wflecExpectedArpResponseTime | 0 | 0 | C20 Expected LE_ARP Reponse Time. The maximum time (seconds) that the LEC expects an LE_ARP_REQUEST/ LE_ARP_RESPONSE cycle to tak… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.18 | wflecFlushTimeOut | 0 | 0 | wflecFlushtimeOut |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.19 | wflecPathSwitchingDelay | 0 | 0 | C22 Path Switching Delay. The time (seconds) since sending a frame to the BUS after which the LE Client may assume that the frame… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.20 | wflecLocalSegmentID | 0 | 0 | C23 Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing b… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.21 | wflecMulticastSendType | 0 | 0 | C24 Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. T… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.22 | wflecMulticastSendAvgRate | 0 | 0 | C25 Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VC… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.23 | wflecMulticastSendPeakRate | 0 | 0 | C26 Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send V… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.24 | wflecConnectionCompleteTimer | 0 | 0 | C28 Connection Complete Timer. Optional. In Connection Establishment this is the time period in which data or a READY_IND message… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.25 | wflecFlushEnable | 0 | 0 | Flush Protocol enable/disable - ATM_LEC_FLUSH_ENABLED - ATM LE flush protocol is used when switching VCs. If the Flush timeout (w… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.26 | wflecConfigRetry | 0 | 0 | This attribute specifies how many retries should be attempted if any part of the config phase fails. The config phase starts wi… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.27 | wflecMulticastFwdTimeout | 0 | 0 | The attribute specifies how many seconds to wait for the Multicast Forward VC to be set up before retrying. The retry will incl… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.28 | wflecMulticastFwdRetry | 0 | 0 | The attribute specifies how many retries should be made to get the Multicast Forward VC setup. The LEC will retry after wflecMu… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.29 | wflecDebugLevel | 0 | 0 | Debug Levels - The level of debug desired from the Portable LEC code LEC_DBG_OFF - 0 LEC_DBG_WARN - 1 LEC_DBG_ERR - 2 LEC_DBG_MSG… |
| 1.3.6.1.4.1.18.3.5.9.5.20.1.1.31 | wflecConfigV2Capable | 0 | 0 | Indication to enable or disable LANE V2 support for this ATM LE Client. |