The parameters for a particular Data Link Connection
Management Interface.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
The parameters for a particular Data Link Connection
Management Interface.
Parsed from file Wellfleet-FRSW-MIB.mib
Module: Wellfleet-FRSW-MIB
Vendor: Wellfleet
Module: Wellfleet-FRSW-MIB
[Automatically extracted from oidview.com]
wfFrSwDlcmiEntry OBJECT-TYPE SYNTAX WfFrSwDlcmiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The parameters for a particular Data Link Connection Management Interface. " INDEX { wfFrSwDlcmiCircuit } ::= { wfFrSwDlcmiTable 1 }
wfFrSwDlcmiEntry OBJECT-TYPE SYNTAX WfFrSwDlcmiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The parameters for a particular Data Link Connection Management Interface." INDEX { wfFrSwDlcmiCircuit } ::= { wfFrSwDlcmiTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.9.6.1.1.1 | wfFrSwDlcmiDelete | 0 | 0 | Indication to delete this frame relay interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.2 | wfFrSwDlcmiState | 0 | 0 | Indicates which state of DLCMI the interface is in |
1.3.6.1.4.1.18.3.5.9.6.1.1.3 | wfFrSwDlcmiNniEnable | 0 | 0 | Indicates whether a NNI is enabled for this entry. |
1.3.6.1.4.1.18.3.5.9.6.1.1.4 | wfFrSwDlcmiCircuit | 0 | 0 | Instance identifier; the circuit number of this entry. |
1.3.6.1.4.1.18.3.5.9.6.1.1.5 | wfFrSwDlcmiManagementType | 0 | 0 | Indicates the Data Link Connection Management scheme that is active. |
1.3.6.1.4.1.18.3.5.9.6.1.1.6 | wfFrSwL3NetAddress | 0 | 0 | Indicates level 3 (IP) address of this frame relay interface |
1.3.6.1.4.1.18.3.5.9.6.1.1.7 | wfFrSwDlcmiAddressLen | 0 | 0 | Indicates the address length, including the control portion. |
1.3.6.1.4.1.18.3.5.9.6.1.1.8 | wfFrSwDlcmiControlByteDisable | 0 | 0 | Indicates inclusion of control byte in q922 format. |
1.3.6.1.4.1.18.3.5.9.6.1.1.9 | wfFrSwDlcmiPollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages. |
1.3.6.1.4.1.18.3.5.9.6.1.1.10 | wfFrSwDlcmiFullEnquiryInterval | 0 | 0 | Indicates the number of status enquiries before a full status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.11 | wfFrSwDlcmiErrorThreshold | 0 | 0 | Indicates the number errors monitored before declaring the interface down. |
1.3.6.1.4.1.18.3.5.9.6.1.1.12 | wfFrSwDlcmiMonitoredEvents | 0 | 0 | Indicates the events over which error threshold is kept. |
1.3.6.1.4.1.18.3.5.9.6.1.1.13 | wfFrSwDlcmiRecoveryCounts | 0 | 0 | Indicates the number of correct polling cycles during recovery. |
1.3.6.1.4.1.18.3.5.9.6.1.1.14 | wfFrSwDlcmiMaxSupportedVCs | 0 | 0 | Indicates the maximum number of VCs allowed. |
1.3.6.1.4.1.18.3.5.9.6.1.1.15 | wfFrSwDlcmiVCsInUse | 0 | 0 | Indicates the number of VCs that are currently configured on this interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.16 | wfFrSwSwitchHdrErrors | 0 | 0 | Indicates the number of frames dropped because they were received on the remote side with an invalid switch header. |
1.3.6.1.4.1.18.3.5.9.6.1.1.17 | wfFrSwDlcmiSequenceCount | 0 | 0 | Indicates this switch's sequence counter; value of next to send. |
1.3.6.1.4.1.18.3.5.9.6.1.1.18 | wfFrSwDlcmiLastReceived | 0 | 0 | Indicates the sequence number just received from the end station. |
1.3.6.1.4.1.18.3.5.9.6.1.1.19 | wfFrSwDlcmiActiveSeqCount | 0 | 0 | Indicates the switch's sequence counter for sending status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.20 | wfFrSwDlcmiActiveReceived | 0 | 0 | Indicates the sequence number just received from the enquiring station. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.21 | wfFrSwDlcmiPolls | 0 | 0 | This is the counter of where we are in the polling cycle. |
1.3.6.1.4.1.18.3.5.9.6.1.1.22 | wfFrSwDlcmiAlarmTimer | 0 | 0 | Counter of 1/2 second timeouts. Indicates when to expect poll. |
1.3.6.1.4.1.18.3.5.9.6.1.1.23 | wfFrSwErrType | 0 | 0 | Indicates the type of the last specific monitored error. |
1.3.6.1.4.1.18.3.5.9.6.1.1.24 | wfFrSwErrData | 0 | 0 | Contains as much of the error packet as possible. |
1.3.6.1.4.1.18.3.5.9.6.1.1.25 | wfFrSwErrTime | 0 | 0 | Indicates the time the last error occurred. |
1.3.6.1.4.1.18.3.5.9.6.1.1.26 | wfFrSwBcMeasurementInterval | 0 | 0 | Indicates the Committed Burst sample window interval in msec |
1.3.6.1.4.1.18.3.5.9.6.1.1.27 | wfFrSwDlcmiMcastNoBufferErrors | 0 | 0 | Indicates the number of times a multicast failed partially or wholly because there are insufficient buffers available to create m… |
1.3.6.1.4.1.18.3.5.9.6.1.1.28 | wfFrSwDlcmiFrameTooShortErrors | 0 | 0 | Indicates the number of frames dropped that are too short to be accepted. |
1.3.6.1.4.1.18.3.5.9.6.1.1.29 | wfFrSwDlcmiFrameTooLongErrors | 0 | 0 | Indicates the number of frames dropped that are too long to be accepted. |
1.3.6.1.4.1.18.3.5.9.6.1.1.30 | wfFrSwDlcmiIllegalDlciErrors | 0 | 0 | Indicates the number of frames dropped that had an invalid DLCI value. |
1.3.6.1.4.1.18.3.5.9.6.1.1.31 | wfFrSwDlcmiUnknownDlciErrors | 0 | 0 | Indicates the number of frames dropped which had an unknown DLCI value. |
1.3.6.1.4.1.18.3.5.9.6.1.1.32 | wfFrSwDlcmiProtocolErrors | 0 | 0 | Indicates the number of frames dropped because of a DLCMI protocol violation. |
1.3.6.1.4.1.18.3.5.9.6.1.1.33 | wfFrSwDlcmiUnknownIEErrors | 0 | 0 | Indicates the number of frames dropped that had an unknown information element. |
1.3.6.1.4.1.18.3.5.9.6.1.1.34 | wfFrSwDlcmiSequenceErrors | 0 | 0 | Indicates the number of frames dropped because of a DLCMI sequence error. |
1.3.6.1.4.1.18.3.5.9.6.1.1.35 | wfFrSwDlcmiUnknownRPTErrors | 0 | 0 | Indicates the number of frames dropped which had an unknown report type. |
1.3.6.1.4.1.18.3.5.9.6.1.1.36 | wfFrSwDlcmiControlByteErrors | 0 | 0 | Indicates the number of frames dropped that had an unsupported control byte. |
1.3.6.1.4.1.18.3.5.9.6.1.1.37 | wfFrSwDlcmiFormatErrors | 0 | 0 | Indicates the number of frames dropped due to a frame format error. |
1.3.6.1.4.1.18.3.5.9.6.1.1.38 | wfFrSwDlcmiOtherErrors | 0 | 0 | Indicates the number of frames dropped due to unknown or other errors not counted by any error counter. |
1.3.6.1.4.1.18.3.5.9.6.1.1.39 | wfFrSwDlcmiStatus | 0 | 0 | Indicates which state of execution the DLCMI gate is in |
1.3.6.1.4.1.18.3.5.9.6.1.1.40 | wfFrSwDlcmiNewVCs | 0 | 0 | Indicates the number of newly added PVCs that we have not yet told the CPE about, by means of a full-status message. |
1.3.6.1.4.1.18.3.5.9.6.1.1.41 | wfFrSwDlcmiDeletedVCs | 0 | 0 | Indicates the number of deletedly added PVCs that we have not yet told the CPE about, by means of a full-status message. |
1.3.6.1.4.1.18.3.5.9.6.1.1.42 | wfFrSwDlcmiFullStatusSeq | 0 | 0 | Indicates the expected sequence number for the next Status Enquiry message that will prove that the CPE received our last Full S… |
1.3.6.1.4.1.18.3.5.9.6.1.1.43 | wfFrSwDlcmiBidirect | 0 | 0 | Indication to delete this frame relay interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.44 | wfFrSwDlcmiDteStatus | 0 | 0 | Indicates which state of execution the DLCMI gate is in for bidirectional procedures. |
1.3.6.1.4.1.18.3.5.9.6.1.1.45 | wfFrSwDlcmiDteSeqCount | 0 | 0 | Indicates the switch's sequence counter for sending status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.46 | wfFrSwDlcmiDteReceived | 0 | 0 | Indicates the sequence number just received from the enquiring station. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.47 | wfFrSwDlcmiDteLastReceived | 0 | 0 | Indicates the sequence number just received from the end station. |
1.3.6.1.4.1.18.3.5.9.6.1.1.48 | wfFrSwDlcmiDtePolls | 0 | 0 | This is the counter of where we are in the polling cycle. |
1.3.6.1.4.1.18.3.5.9.6.1.1.49 | wfFrSwDlcmiDtePollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages. |
1.3.6.1.4.1.18.3.5.9.6.1.1.50 | wfFrSwDlcmiDteFullEnquiryInterval | 0 | 0 | Indicates the number of status enquiries before a full status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.51 | wfFrSwDlcmiDteErrorThreshold | 0 | 0 | Indicates the number errors monitored before declaring the interface down. |
1.3.6.1.4.1.18.3.5.9.6.1.1.52 | wfFrSwDlcmiCrossNetEnable | 0 | 0 | Indication to delete this frame relay interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.53 | wfFrSwDlcmiCrossNetPollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages. |
1.3.6.1.4.1.18.3.5.9.6.1.1.54 | wfFrSwDlcmiCrossNetErrorThreshold | 0 | 0 | Indicates the number missed heartbeat polls before declaring the cross-net PVC inactive. |
1.3.6.1.4.1.18.3.5.9.6.1.1.55 | wfFrSwDlcmiCrossNetAsyncUpdateEnable | 0 | 0 | Indicates whether we are to send to the other end of the network, status updates for dlcis as soon as there is a change of status… |
1.3.6.1.4.1.18.3.5.9.6.1.1.56 | wfFrSwDlcmiBcMeasurementEnable | 0 | 0 | Indicates whether Committed Burst Measurement is enabled for this interface. If this attribute is set to DISABLE then DE bit sett… |
1.3.6.1.4.1.18.3.5.9.6.1.1.57 | wfFrSwDlcmiAsyncUpdateEnable | 0 | 0 | Indicates whether the link management entity should send an asynchronous single PVC update message when the state of a PVC is cha… |
1.3.6.1.4.1.18.3.5.9.6.1.1.58 | wfFrSwDlcmiCrossNetListenEnable | 0 | 0 | Indicates whether the link management entity should make a judgement of the PVC's status based on Cross Net updates |
1.3.6.1.4.1.18.3.5.9.6.1.1.59 | wfFrSwDlcmiSvcDisable | 0 | 0 | Indicates whether SVC is enabled or disabled for this access channel. |
1.3.6.1.4.1.18.3.5.9.6.1.1.60 | wfFrSwDlcmiL2AddrType | 0 | 0 | Indicates the address type supported on this access channel. This information is needed when wFrSwDlcmiSVCDisable is enabled. |
1.3.6.1.4.1.18.3.5.9.6.1.1.61 | wfFrSwDlcmiEscapeMode | 0 | 0 | Identifies the Escape mode (none, ingress or egress) to be used for PVCs with wfFrSwVcEscapeMode set to enabled. |
1.3.6.1.4.1.18.3.5.9.6.1.1.62 | wfFrSwDlcmiEscapeCircuit | 0 | 0 | Identifies the FR-DTE circuit number corresponding to an Escape PVC. Applies only to PVCs with wfFrSwVcEscapeEnable set to enabl… |
1.3.6.1.4.1.18.3.5.9.6.1.1.63 | wfFrSwDlcmiEscapeVcCount | 0 | 0 | The number of PVCs on this DLCMI that are configured as Escape VCs |
1.3.6.1.4.1.18.3.5.9.6.1.1.64 | wfFrSwDlcmiIwfMode | 0 | 0 | Identifies the interworking mode (none, SDLC-to-FRSW) to be used for PVCs with wfFrSwVcEscapeMode set to enabled. |
1.3.6.1.4.1.18.3.5.9.6.1.1.65 | wfFrSwDlcmiSvcBillingEnable | 0 | 0 | None |
1.3.6.1.4.1.18.3.5.9.6.1.1.66 | wfFrSwDlcmiSpvcAgent | 0 | 0 | Indicates if an SPVC Call Request Agent, Call Accept Agent, or both are enabled on this FRSW circuit. |
1.3.6.1.4.1.18.3.5.9.6.1.1.67 | wfFrSwDlcmiCallAccDlciSelectionType | 0 | 0 | Indicates to the Call Accept Agent to accept SPVC Call Setup requests for any available DLCI or for a specific DLCI. Call Setup r… |