Indicates the expected sequence number for the next Status Enquiry
message that will prove that the CPE received our last Full Status
Message and knows about the deleted PVCs.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
Indicates the expected sequence number for the next Status Enquiry
message that will prove that the CPE received our last Full Status
Message and knows about the deleted PVCs.
Parsed from file Wellfleet-FRSW-MIB.mib
Module: Wellfleet-FRSW-MIB
Vendor: Wellfleet
Module: Wellfleet-FRSW-MIB
[Automatically extracted from oidview.com]
wfFrSwDlcmiFullStatusSeq OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Indicates the expected sequence number for the next Status Enquiry message that will prove that the CPE received our last Full Status Message and knows about the deleted PVCs. " ::= { wfFrSwDlcmiEntry 42 }
wfFrSwDlcmiFullStatusSeq OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the expected sequence number for the next Status Enquiry message that will prove that the CPE received our last Full Status Message and knows about the deleted PVCs." ::= { wfFrSwDlcmiEntry 42 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.9.6.1.1.1 | wfFrSwDlcmiDelete | 0 | 0 | Indication to delete this frame relay interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.2 | wfFrSwDlcmiState | 0 | 0 | Indicates which state of DLCMI the interface is in |
1.3.6.1.4.1.18.3.5.9.6.1.1.3 | wfFrSwDlcmiNniEnable | 0 | 0 | Indicates whether a NNI is enabled for this entry. |
1.3.6.1.4.1.18.3.5.9.6.1.1.4 | wfFrSwDlcmiCircuit | 0 | 0 | Instance identifier; the circuit number of this entry. |
1.3.6.1.4.1.18.3.5.9.6.1.1.5 | wfFrSwDlcmiManagementType | 0 | 0 | Indicates the Data Link Connection Management scheme that is active. |
1.3.6.1.4.1.18.3.5.9.6.1.1.6 | wfFrSwL3NetAddress | 0 | 0 | Indicates level 3 (IP) address of this frame relay interface |
1.3.6.1.4.1.18.3.5.9.6.1.1.7 | wfFrSwDlcmiAddressLen | 0 | 0 | Indicates the address length, including the control portion. |
1.3.6.1.4.1.18.3.5.9.6.1.1.8 | wfFrSwDlcmiControlByteDisable | 0 | 0 | Indicates inclusion of control byte in q922 format. |
1.3.6.1.4.1.18.3.5.9.6.1.1.9 | wfFrSwDlcmiPollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages. |
1.3.6.1.4.1.18.3.5.9.6.1.1.10 | wfFrSwDlcmiFullEnquiryInterval | 0 | 0 | Indicates the number of status enquiries before a full status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.11 | wfFrSwDlcmiErrorThreshold | 0 | 0 | Indicates the number errors monitored before declaring the interface down. |
1.3.6.1.4.1.18.3.5.9.6.1.1.12 | wfFrSwDlcmiMonitoredEvents | 0 | 0 | Indicates the events over which error threshold is kept. |
1.3.6.1.4.1.18.3.5.9.6.1.1.13 | wfFrSwDlcmiRecoveryCounts | 0 | 0 | Indicates the number of correct polling cycles during recovery. |
1.3.6.1.4.1.18.3.5.9.6.1.1.14 | wfFrSwDlcmiMaxSupportedVCs | 0 | 0 | Indicates the maximum number of VCs allowed. |
1.3.6.1.4.1.18.3.5.9.6.1.1.15 | wfFrSwDlcmiVCsInUse | 0 | 0 | Indicates the number of VCs that are currently configured on this interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.16 | wfFrSwSwitchHdrErrors | 0 | 0 | Indicates the number of frames dropped because they were received on the remote side with an invalid switch header. |
1.3.6.1.4.1.18.3.5.9.6.1.1.17 | wfFrSwDlcmiSequenceCount | 0 | 0 | Indicates this switch's sequence counter; value of next to send. |
1.3.6.1.4.1.18.3.5.9.6.1.1.18 | wfFrSwDlcmiLastReceived | 0 | 0 | Indicates the sequence number just received from the end station. |
1.3.6.1.4.1.18.3.5.9.6.1.1.19 | wfFrSwDlcmiActiveSeqCount | 0 | 0 | Indicates the switch's sequence counter for sending status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.20 | wfFrSwDlcmiActiveReceived | 0 | 0 | Indicates the sequence number just received from the enquiring station. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.21 | wfFrSwDlcmiPolls | 0 | 0 | This is the counter of where we are in the polling cycle. |
1.3.6.1.4.1.18.3.5.9.6.1.1.22 | wfFrSwDlcmiAlarmTimer | 0 | 0 | Counter of 1/2 second timeouts. Indicates when to expect poll. |
1.3.6.1.4.1.18.3.5.9.6.1.1.23 | wfFrSwErrType | 0 | 0 | Indicates the type of the last specific monitored error. |
1.3.6.1.4.1.18.3.5.9.6.1.1.24 | wfFrSwErrData | 0 | 0 | Contains as much of the error packet as possible. |
1.3.6.1.4.1.18.3.5.9.6.1.1.25 | wfFrSwErrTime | 0 | 0 | Indicates the time the last error occurred. |
1.3.6.1.4.1.18.3.5.9.6.1.1.26 | wfFrSwBcMeasurementInterval | 0 | 0 | Indicates the Committed Burst sample window interval in msec |
1.3.6.1.4.1.18.3.5.9.6.1.1.27 | wfFrSwDlcmiMcastNoBufferErrors | 0 | 0 | Indicates the number of times a multicast failed partially or wholly because there are insufficient buffers available to create m… |
1.3.6.1.4.1.18.3.5.9.6.1.1.28 | wfFrSwDlcmiFrameTooShortErrors | 0 | 0 | Indicates the number of frames dropped that are too short to be accepted. |
1.3.6.1.4.1.18.3.5.9.6.1.1.29 | wfFrSwDlcmiFrameTooLongErrors | 0 | 0 | Indicates the number of frames dropped that are too long to be accepted. |
1.3.6.1.4.1.18.3.5.9.6.1.1.30 | wfFrSwDlcmiIllegalDlciErrors | 0 | 0 | Indicates the number of frames dropped that had an invalid DLCI value. |
1.3.6.1.4.1.18.3.5.9.6.1.1.31 | wfFrSwDlcmiUnknownDlciErrors | 0 | 0 | Indicates the number of frames dropped which had an unknown DLCI value. |
1.3.6.1.4.1.18.3.5.9.6.1.1.32 | wfFrSwDlcmiProtocolErrors | 0 | 0 | Indicates the number of frames dropped because of a DLCMI protocol violation. |
1.3.6.1.4.1.18.3.5.9.6.1.1.33 | wfFrSwDlcmiUnknownIEErrors | 0 | 0 | Indicates the number of frames dropped that had an unknown information element. |
1.3.6.1.4.1.18.3.5.9.6.1.1.34 | wfFrSwDlcmiSequenceErrors | 0 | 0 | Indicates the number of frames dropped because of a DLCMI sequence error. |
1.3.6.1.4.1.18.3.5.9.6.1.1.35 | wfFrSwDlcmiUnknownRPTErrors | 0 | 0 | Indicates the number of frames dropped which had an unknown report type. |
1.3.6.1.4.1.18.3.5.9.6.1.1.36 | wfFrSwDlcmiControlByteErrors | 0 | 0 | Indicates the number of frames dropped that had an unsupported control byte. |
1.3.6.1.4.1.18.3.5.9.6.1.1.37 | wfFrSwDlcmiFormatErrors | 0 | 0 | Indicates the number of frames dropped due to a frame format error. |
1.3.6.1.4.1.18.3.5.9.6.1.1.38 | wfFrSwDlcmiOtherErrors | 0 | 0 | Indicates the number of frames dropped due to unknown or other errors not counted by any error counter. |
1.3.6.1.4.1.18.3.5.9.6.1.1.39 | wfFrSwDlcmiStatus | 0 | 0 | Indicates which state of execution the DLCMI gate is in |
1.3.6.1.4.1.18.3.5.9.6.1.1.40 | wfFrSwDlcmiNewVCs | 0 | 0 | Indicates the number of newly added PVCs that we have not yet told the CPE about, by means of a full-status message. |
1.3.6.1.4.1.18.3.5.9.6.1.1.41 | wfFrSwDlcmiDeletedVCs | 0 | 0 | Indicates the number of deletedly added PVCs that we have not yet told the CPE about, by means of a full-status message. |
1.3.6.1.4.1.18.3.5.9.6.1.1.43 | wfFrSwDlcmiBidirect | 0 | 0 | Indication to delete this frame relay interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.44 | wfFrSwDlcmiDteStatus | 0 | 0 | Indicates which state of execution the DLCMI gate is in for bidirectional procedures. |
1.3.6.1.4.1.18.3.5.9.6.1.1.45 | wfFrSwDlcmiDteSeqCount | 0 | 0 | Indicates the switch's sequence counter for sending status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.46 | wfFrSwDlcmiDteReceived | 0 | 0 | Indicates the sequence number just received from the enquiring station. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.47 | wfFrSwDlcmiDteLastReceived | 0 | 0 | Indicates the sequence number just received from the end station. |
1.3.6.1.4.1.18.3.5.9.6.1.1.48 | wfFrSwDlcmiDtePolls | 0 | 0 | This is the counter of where we are in the polling cycle. |
1.3.6.1.4.1.18.3.5.9.6.1.1.49 | wfFrSwDlcmiDtePollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages. |
1.3.6.1.4.1.18.3.5.9.6.1.1.50 | wfFrSwDlcmiDteFullEnquiryInterval | 0 | 0 | Indicates the number of status enquiries before a full status enquiry. (For bidirectional procedures.) |
1.3.6.1.4.1.18.3.5.9.6.1.1.51 | wfFrSwDlcmiDteErrorThreshold | 0 | 0 | Indicates the number errors monitored before declaring the interface down. |
1.3.6.1.4.1.18.3.5.9.6.1.1.52 | wfFrSwDlcmiCrossNetEnable | 0 | 0 | Indication to delete this frame relay interface. |
1.3.6.1.4.1.18.3.5.9.6.1.1.53 | wfFrSwDlcmiCrossNetPollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages. |
1.3.6.1.4.1.18.3.5.9.6.1.1.54 | wfFrSwDlcmiCrossNetErrorThreshold | 0 | 0 | Indicates the number missed heartbeat polls before declaring the cross-net PVC inactive. |
1.3.6.1.4.1.18.3.5.9.6.1.1.55 | wfFrSwDlcmiCrossNetAsyncUpdateEnable | 0 | 0 | Indicates whether we are to send to the other end of the network, status updates for dlcis as soon as there is a change of status… |
1.3.6.1.4.1.18.3.5.9.6.1.1.56 | wfFrSwDlcmiBcMeasurementEnable | 0 | 0 | Indicates whether Committed Burst Measurement is enabled for this interface. If this attribute is set to DISABLE then DE bit sett… |
1.3.6.1.4.1.18.3.5.9.6.1.1.57 | wfFrSwDlcmiAsyncUpdateEnable | 0 | 0 | Indicates whether the link management entity should send an asynchronous single PVC update message when the state of a PVC is cha… |
1.3.6.1.4.1.18.3.5.9.6.1.1.58 | wfFrSwDlcmiCrossNetListenEnable | 0 | 0 | Indicates whether the link management entity should make a judgement of the PVC's status based on Cross Net updates |
1.3.6.1.4.1.18.3.5.9.6.1.1.59 | wfFrSwDlcmiSvcDisable | 0 | 0 | Indicates whether SVC is enabled or disabled for this access channel. |
1.3.6.1.4.1.18.3.5.9.6.1.1.60 | wfFrSwDlcmiL2AddrType | 0 | 0 | Indicates the address type supported on this access channel. This information is needed when wFrSwDlcmiSVCDisable is enabled. |
1.3.6.1.4.1.18.3.5.9.6.1.1.61 | wfFrSwDlcmiEscapeMode | 0 | 0 | Identifies the Escape mode (none, ingress or egress) to be used for PVCs with wfFrSwVcEscapeMode set to enabled. |
1.3.6.1.4.1.18.3.5.9.6.1.1.62 | wfFrSwDlcmiEscapeCircuit | 0 | 0 | Identifies the FR-DTE circuit number corresponding to an Escape PVC. Applies only to PVCs with wfFrSwVcEscapeEnable set to enabl… |
1.3.6.1.4.1.18.3.5.9.6.1.1.63 | wfFrSwDlcmiEscapeVcCount | 0 | 0 | The number of PVCs on this DLCMI that are configured as Escape VCs |
1.3.6.1.4.1.18.3.5.9.6.1.1.64 | wfFrSwDlcmiIwfMode | 0 | 0 | Identifies the interworking mode (none, SDLC-to-FRSW) to be used for PVCs with wfFrSwVcEscapeMode set to enabled. |
1.3.6.1.4.1.18.3.5.9.6.1.1.65 | wfFrSwDlcmiSvcBillingEnable | 0 | 0 | None |
1.3.6.1.4.1.18.3.5.9.6.1.1.66 | wfFrSwDlcmiSpvcAgent | 0 | 0 | Indicates if an SPVC Call Request Agent, Call Accept Agent, or both are enabled on this FRSW circuit. |
1.3.6.1.4.1.18.3.5.9.6.1.1.67 | wfFrSwDlcmiCallAccDlciSelectionType | 0 | 0 | Indicates to the Call Accept Agent to accept SPVC Call Setup requests for any available DLCI or for a specific DLCI. Call Setup r… |