The Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.
Parsed from file fr2.mib.txt
Company: None
Module: Wellfleet-FR2-MIB
The Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.
Parsed from file Wellfleet-FR2-MIB.mib
Module: Wellfleet-FR2-MIB
Vendor: Wellfleet
Module: Wellfleet-FR2-MIB
[Automatically extracted from oidview.com]
wfFrDlcmiLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC." ::= { wfFrIfDlcmiEntry 4 }
wfFrDlcmiLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC." ::= { wfFrIfDlcmiEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.9.1.1.1 | wfFrDlcmiDelete | 0 | 0 | Indication to delete this frame relay interface |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.2 | wfFrDlcmiDisable | 0 | 0 | Indicates when a dlcmi entry is to be enabled or disabled. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.3 | wfFrDlcmiLineNumber | 0 | 0 | The line number on which this frame relay interface resides. This is the first of two instance identifiers. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.5 | wfFrDlcmiCircuit | 0 | 0 | The circuit number of this entry |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.6 | wfFrDlcmiManagementType | 0 | 0 | This variable indicates which Data Link Connection Management scheme is active (and by implication, what DLCI it uses). |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.7 | wfFrDlcmiStatus | 0 | 0 | Indicates the state of the interface. It is called status because this is what it was called in the rfc. FR_STATUS_RUNNING is the… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.8 | wfFrDlcmiAddress | 0 | 0 | This states which address format is in use on the FR interface. The default is Q922 |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.9 | wfFrDlcmiAddressLen | 0 | 0 | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the addr… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.10 | wfFrDlcmiPollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.11 | wfFrDlcmiFullEnquiryInterval | 0 | 0 | The number of status enquiry intervals that pass before issuance of a full status enquiry message. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.12 | wfFrDlcmiErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.13 | wfFrDlcmiMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvent… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.14 | wfFrDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. The system sets … |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.15 | wfFrDlcmiVCsConfigured | 0 | 0 | The number of VCs that are presently configured on the interface. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.16 | wfFrDlcmiMulticast | 0 | 0 | This indicates whether the frame relay provider offers a multicast |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.17 | wfFrDlcmiSeqCount | 0 | 0 | This station's sequence counter. It represents the next value to send. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.18 | wfFrDlcmiLastReceived | 0 | 0 | The sequence number just received from the switch. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.19 | wfFrDlcmiPassiveSeqCount | 0 | 0 | This station's sequence counter for answering status enquiry. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.20 | wfFrDlcmiPassiveReceived | 0 | 0 | The sequence number just received from the enquring station. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.21 | wfFrDlcmiPolls | 0 | 0 | This is the counter of where we are in the polling cycle. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.22 | wfFrDlcmiCongestionDisable | 0 | 0 | This indicates whether the VCs should use the congestion algorithm or not. Each VC may be configured to run the algorithm to ov… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.23 | wfFrDlcmiCongestionTmr | 0 | 0 | This is the time period over which congestion notifications are counted. It is also the period during which the VC will cease se… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.24 | wfFrDlcmiCongestionCtr | 0 | 0 | This represents the number of congestion notifications, when received within wfFrDlcmiCongestionTmr time, will result in the VC … |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.25 | wfFrErrType | 0 | 0 | Indicate the type of the last specific monitored error. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.26 | wfFrErrData | 0 | 0 | Contains as much of the error packet as possible. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.27 | wfFrErrTime | 0 | 0 | The time the last error occurred. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.28 | wfFrErrDiscards | 0 | 0 | The number of inbound frames dropped because of format or other errors or because the VC was not known. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.29 | wfFrErrDrops | 0 | 0 | The number of outbound frames dropped. Usually this is due the specified DLCI being unknown or a broadcast packet is too long |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.30 | wfFrErrFaults | 0 | 0 | The number of times that the Interface has come down due to errors since the system started. The value is reset when a restart p… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.31 | wfFrErrFaultTime | 0 | 0 | The time at which the interface last went down. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.32 | wfFrDlcmiDialFailureDisable | 0 | 0 | On a dial interface, this indicates whether to time-out if a full status message is not received. A timeout will cause the connec… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.33 | wfFrDlcmiInterfaceType | 0 | 0 | Indicates the type of interface this is. A normal interface is not backed up, a primary interface is backed up, and a backup inte… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.34 | wfFrDlcmiBackupFilterCct | 0 | 0 | The circuit number which defines the ppq filters that the backup interface will use. If 0, the filters defined for the default/ma… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.35 | wfFrDlcmiDebugLevel | 0 | 0 | For Bay Networks internal use only. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.36 | wfFrDlcmiTraceLevel | 0 | 0 | For Bay Networks internal use only. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.37 | wfFrDlcmiCongestionMethod | 0 | 0 | Default congestion control method to use for all VCs on this interface. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.38 | wfFrDlcmiShapingTmr | 0 | 0 | The interval, in ticks (1/1024th of a second), that VCs are processed for traffic shaping. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.39 | wfFrDlcmiShapingHiQueueLimit | 0 | 0 | The total number of buffers that the interface will allow VCs to queue into the Hi queue. Divided by the number of traffic shaped… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.40 | wfFrDlcmiShapingNormalQueueLimit | 0 | 0 | The total number of buffers that the interface will allow VCs to queue into the Normal queue. Divided by the number of traffic sh… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.41 | wfFrDlcmiShapingLoQueueLimit | 0 | 0 | The total number of buffers that the interface will allow VCs to queue into the Lo queue. Divided by the number of traffic shaped… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.42 | wfFrDlcmiXoffDisable | 0 | 0 | Indicates whether to listen(enabled) or ignore(disabled) XOFF (R-bit) notification |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.43 | wfFrDlcmiMissingPolls | 0 | 0 | Number of times there was no status enquiry response to a status enquiry |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.44 | wfFrDlcmiName | 0 | 0 | User name for this interface, used by BCC |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.45 | wfFrDlcmiEnableSinglePVCUpdate | 0 | 0 | Enables or disables the processing of Single Async PVC status messages that some switches use. If disabled, Single Async PVC sta… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.46 | wfFrDlcmiAnnexSwEnq | 0 | 0 | Enables or disables the processing of status enquiry on annexdswitch(7) and annexaswitch(8). If it is enabled and the status enqu… |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.47 | wfFrDlcmiAnnexSwEnqTmr | 0 | 0 | Specify the timeout value in seconds for the status inquiry on annexdswitch(7) and annexaswitch(8). It is defaulted to 10 seconds. |
| 1.3.6.1.4.1.18.3.5.9.9.1.1.48 | wfFrDlcmiExtraStatusInfoEnable | 0 | 0 | Indicates whether or not to process extra lmi ies that may received from the switch |