Entry in table of QoS policy rules
Parsed from file v73e2b4.mib.txt
Company: None
Module: EXTREME-PBQOS-MIB
Entry in table of QoS policy rules
Parsed from file EXTREME-PBQOS-MIB.mib
Module: EXTREME-PBQOS-MIB
Vendor: Extreme Networks
Module: EXTREME-PBQOS-MIB
[Automatically extracted from oidview.com]
extremeQosRuleEntry OBJECT-TYPE SYNTAX ExtremeQosRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in table of QoS policy rules" INDEX { extremeQosRuleIndex } ::= { extremeQosRuleTable 1 }
extremeQosRuleEntry OBJECT-TYPE SYNTAX ExtremeQosRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in table of QoS policy rules" INDEX { extremeQosRuleIndex } ::= { extremeQosRuleTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.7.2.1.1 | extremeQosRuleIndex | 0 | 0 | An index into the table of QoS policy pattern rules. The index for a manager to use for creating new rows is determined by readin… |
| 1.3.6.1.4.1.1916.1.7.2.1.2 | extremeQosRuleScope | 0 | 0 | The scope of conditions in which this rule applies. The value 'signaled' means that the policy rule is applied only to QoS signal… |
| 1.3.6.1.4.1.1916.1.7.2.1.3 | extremeQosRuleDirection | 0 | 0 | The direction in which this rule applies. The value 'forward' means that the rule is applied to data streams in the direction spe… |
| 1.3.6.1.4.1.1916.1.7.2.1.4 | extremeQosRuleInPort | 0 | 0 | The ifIndex value of the physical switch input port for which this rule applies. Rules that indicate an individual value for this… |
| 1.3.6.1.4.1.1916.1.7.2.1.5 | extremeQosRuleInPortMask, extremeQosRuleOutPortMap | 0 | 0 | The list of physical switch output ports for which this rule applies. The default value is an empty octet string indicating that … |
| 1.3.6.1.4.1.1916.1.7.2.1.6 | extremeQosRuleDestAddrStart | 0 | 0 | The start of the destination IP address range for which this rule applies.If this object has any value other than the default the… |
| 1.3.6.1.4.1.1916.1.7.2.1.7 | extremeQosRuleDestAddrEnd | 0 | 0 | The end of the destination IP address range for which this rule applies. If this object has any value other than the default then… |
| 1.3.6.1.4.1.1916.1.7.2.1.8 | extremeQosRuleSrcAddrStart | 0 | 0 | The start of the source IP address range for which this rule applies. If this object has any value other than the default then th… |
| 1.3.6.1.4.1.1916.1.7.2.1.9 | extremeQosRuleSrcAddrEnd | 0 | 0 | The end of the source IP address range for which this rule applies. If this object has any value other than the default then this… |
| 1.3.6.1.4.1.1916.1.7.2.1.10 | extremeQosRuleProtocol | 0 | 0 | The IP protocol number for which this rule applies. If this object has any value other than 'any' then this rule takes precedence… |
| 1.3.6.1.4.1.1916.1.7.2.1.11 | extremeQosRuleDestL4PortStart, extremeQosRuleDestL4Port | 0 | 0 | The destination starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 inform… |
| 1.3.6.1.4.1.1916.1.7.2.1.12 | extremeQosRuleSourceL4PortStart, extremeQosRuleSourceL4Port | 0 | 0 | The source Layer-4 protocol address for which this rule applies. The value of 0 means that all protocols are matched. If this obj… |
| 1.3.6.1.4.1.1916.1.7.2.1.13 | extremeQosRuleTosMask | 0 | 0 | A mask for the incoming IP Type-of-Service field to be applied when matching. The value of 0 means that any incoming IP ToS field… |
| 1.3.6.1.4.1.1916.1.7.2.1.14 | extremeQosRuleTosMatch | 0 | 0 | If the value of the incoming IP Type-of-Service field, after applying a mask of extremeQosRuleTosMask, is this value then this ru… |
| 1.3.6.1.4.1.1916.1.7.2.1.15 | extremeQosRuleQosProfileIndex | 0 | 0 | A pointer into the extremeQosProfileTable indicating the QoS treatment and actions to be applied to traffic matching this rule. A… |
| 1.3.6.1.4.1.1916.1.7.2.1.16 | extremeQosRuleOwner | 0 | 0 | Indicates the identity of the manager that configured this entry. |
| 1.3.6.1.4.1.1916.1.7.2.1.17 | extremeQosRuleRowStatus | 0 | 0 | The row status for this QoS rule. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following value… |
| 1.3.6.1.4.1.1916.1.7.2.1.18 | extremeQosRuleDestL4PortEnd | 0 | 0 | The destination last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that al… |
| 1.3.6.1.4.1.1916.1.7.2.1.19 | extremeQosRuleSourceL4PortEnd | 0 | 0 | The source last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all lay… |
| 1.3.6.1.4.1.1916.1.7.2.1.20 | extremeQosRulePrecedence | 0 | 0 | The precedence used to select one rule over potentially multiple rules that might match an L3/L4 flow. The rule with highest prec… |
| 1.3.6.1.4.1.1916.1.7.2.1.21 | extremeQosRuleCounter | 0 | 0 | None |
| 1.3.6.1.4.1.1916.1.7.2.1.22 | extremeQosRuleName | 0 | 0 | A unique Qos rule name. If this is not specified then the system generates one automatically. |