The direction in which this rule applies. The value
'forward' means that the rule is applied to data streams
in the direction specified by the classification pattern.
The value 'backward' means that the rule is applied in
the reverse direction. The value 'any' means that the
rule is applied for traffic in either direction of data
flow. Note that the direction is applied to where the data
flow itself will go, not to the direction of any signaling
messages e.g. RSVP.
Only the value 'forward' is supported in ExtremeWare 6.0.
Parsed from file v73e2b4.mib.txt
Company: None
Module: EXTREME-PBQOS-MIB
The direction in which this rule applies. The value
'forward' means that the rule is applied to data streams
in the direction specified by the classification pattern.
The value 'backward' means that the rule is applied in
the reverse direction. The value 'any' means that the
rule is applied for traffic in either direction of data
flow. Note that the direction is applied to where the data
flow itself will go, not to the direction of any signaling
messages e.g. RSVP.
Only the value 'forward' is supported in ExtremeWare 6.0.
Parsed from file EXTREME-PBQOS-MIB.mib
Module: EXTREME-PBQOS-MIB
Vendor: Extreme Networks
Module: EXTREME-PBQOS-MIB
[Automatically extracted from oidview.com]
extremeQosRuleDirection OBJECT-TYPE SYNTAX INTEGER { any(1), forward(2), backward(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The direction in which this rule applies. The value 'forward' means that the rule is applied to data streams in the direction specified by the classification pattern. The value 'backward' means that the rule is applied in the reverse direction. The value 'any' means that the rule is applied for traffic in either direction of data flow. Note that the direction is applied to where the data flow itself will go, not to the direction of any signaling messages e.g. RSVP. Only the value 'forward' is supported in ExtremeWare 6.0." DEFVAL { forward } ::= { extremeQosRuleEntry 3 }
extremeQosRuleDirection OBJECT-TYPE SYNTAX INTEGER { any(1), forward(2), backward(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The direction in which this rule applies. The value 'forward' means that the rule is applied to data streams in the direction specified by the classification pattern. The value 'backward' means that the rule is applied in the reverse direction. The value 'any' means that the rule is applied for traffic in either direction of data flow. Note that the direction is applied to where the data flow itself will go, not to the direction of any signaling messages e.g. RSVP. Only the value 'forward' is supported in ExtremeWare 6.0." DEFVAL { forward } ::= { extremeQosRuleEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1916.1.7.2.1.1 | extremeQosRuleIndex | 0 | 0 | An index into the table of QoS policy pattern rules. The index for a manager to use for creating new rows is determined by readin… |
1.3.6.1.4.1.1916.1.7.2.1.2 | extremeQosRuleScope | 0 | 0 | The scope of conditions in which this rule applies. The value 'signaled' means that the policy rule is applied only to QoS signal… |
1.3.6.1.4.1.1916.1.7.2.1.4 | extremeQosRuleInPort | 0 | 0 | The ifIndex value of the physical switch input port for which this rule applies. Rules that indicate an individual value for this… |
1.3.6.1.4.1.1916.1.7.2.1.5 | extremeQosRuleInPortMask, extremeQosRuleOutPortMap | 0 | 0 | The list of physical switch output ports for which this rule applies. The default value is an empty octet string indicating that … |
1.3.6.1.4.1.1916.1.7.2.1.6 | extremeQosRuleDestAddrStart | 0 | 0 | The start of the destination IP address range for which this rule applies.If this object has any value other than the default the… |
1.3.6.1.4.1.1916.1.7.2.1.7 | extremeQosRuleDestAddrEnd | 0 | 0 | The end of the destination IP address range for which this rule applies. If this object has any value other than the default then… |
1.3.6.1.4.1.1916.1.7.2.1.8 | extremeQosRuleSrcAddrStart | 0 | 0 | The start of the source IP address range for which this rule applies. If this object has any value other than the default then th… |
1.3.6.1.4.1.1916.1.7.2.1.9 | extremeQosRuleSrcAddrEnd | 0 | 0 | The end of the source IP address range for which this rule applies. If this object has any value other than the default then this… |
1.3.6.1.4.1.1916.1.7.2.1.10 | extremeQosRuleProtocol | 0 | 0 | The IP protocol number for which this rule applies. If this object has any value other than 'any' then this rule takes precedence… |
1.3.6.1.4.1.1916.1.7.2.1.11 | extremeQosRuleDestL4PortStart, extremeQosRuleDestL4Port | 0 | 0 | The destination starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 inform… |
1.3.6.1.4.1.1916.1.7.2.1.12 | extremeQosRuleSourceL4PortStart, extremeQosRuleSourceL4Port | 0 | 0 | The source Layer-4 protocol address for which this rule applies. The value of 0 means that all protocols are matched. If this obj… |
1.3.6.1.4.1.1916.1.7.2.1.13 | extremeQosRuleTosMask | 0 | 0 | A mask for the incoming IP Type-of-Service field to be applied when matching. The value of 0 means that any incoming IP ToS field… |
1.3.6.1.4.1.1916.1.7.2.1.14 | extremeQosRuleTosMatch | 0 | 0 | If the value of the incoming IP Type-of-Service field, after applying a mask of extremeQosRuleTosMask, is this value then this ru… |
1.3.6.1.4.1.1916.1.7.2.1.15 | extremeQosRuleQosProfileIndex | 0 | 0 | A pointer into the extremeQosProfileTable indicating the QoS treatment and actions to be applied to traffic matching this rule. A… |
1.3.6.1.4.1.1916.1.7.2.1.16 | extremeQosRuleOwner | 0 | 0 | Indicates the identity of the manager that configured this entry. |
1.3.6.1.4.1.1916.1.7.2.1.17 | extremeQosRuleRowStatus | 0 | 0 | The row status for this QoS rule. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following value… |
1.3.6.1.4.1.1916.1.7.2.1.18 | extremeQosRuleDestL4PortEnd | 0 | 0 | The destination last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that al… |
1.3.6.1.4.1.1916.1.7.2.1.19 | extremeQosRuleSourceL4PortEnd | 0 | 0 | The source last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all lay… |
1.3.6.1.4.1.1916.1.7.2.1.20 | extremeQosRulePrecedence | 0 | 0 | The precedence used to select one rule over potentially multiple rules that might match an L3/L4 flow. The rule with highest prec… |
1.3.6.1.4.1.1916.1.7.2.1.21 | extremeQosRuleCounter | 0 | 0 | None |
1.3.6.1.4.1.1916.1.7.2.1.22 | extremeQosRuleName | 0 | 0 | A unique Qos rule name. If this is not specified then the system generates one automatically. |