Fast Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Fast Spanning Tree
disabled(0)..........no Fast Spanning Tree
Parsed from file sn_switch_group.mib.txt
Company: None
Module: FOUNDRY-SN-SWITCH-GROUP-MIB
Fast Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Fast Spanning Tree
disabled(0)..........no Fast Spanning Tree
Parsed from file FOUNDRY-SN-SWITCH-GROUP-MIB.mib
Module: FOUNDRY-SN-SWITCH-GROUP-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-SWITCH-GROUP-MIB
[Automatically extracted from oidview.com]
snSwFastStpMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Spanning Tree disabled(0)..........no Fast Spanning Tree" ::= { snSwInfo 42 }
snSwFastStpMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Spanning Tree disabled(0)..........no Fast Spanning Tree" ::= { snSwInfo 42 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.1.42.0 | snSwFastStpMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.1.1 | snSwGroupOperMode | 1 | 1 | noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represe… |
| 1.3.6.1.4.1.1991.1.1.3.1.2 | snSwGroupIpL3SwMode | 1 | 1 | The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled… |
| 1.3.6.1.4.1.1991.1.1.3.1.3 | snSwGroupIpMcastMode | 1 | 1 | The Switch Group is configured with the IP Multicast pruning mode either enabled or disabled and the default is disabled mode. ena… |
| 1.3.6.1.4.1.1991.1.1.3.1.4 | snSwGroupDefaultCfgMode | 1 | 1 | The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will chan… |
| 1.3.6.1.4.1.1991.1.1.3.1.5 | snSwGroupSwitchAgeTime | 1 | 1 | The Switch Age time is 180sec by default. The configured range is 10 to 10,000sec. The time represents the time span to age out … |
| 1.3.6.1.4.1.1991.1.1.3.1.6 | snVLanGroupVlanCurEntry | 1 | 1 | The current total entry number of VLANs are configured. |
| 1.3.6.1.4.1.1991.1.1.3.1.7 | snVLanGroupSetAllVLan | 1 | 1 | The value of this object is the VLanIndex of a particalur entry in snVLanByPortTable (snVLanByPortVLanIndex). All the attributes … |
| 1.3.6.1.4.1.1991.1.1.3.1.8 | snSwPortSetAll | 1 | 1 | The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortI… |
| 1.3.6.1.4.1.1991.1.1.3.1.9 | snFdbTableCurEntry | 1 | 1 | The current total entry number of FDB are configured. |
| 1.3.6.1.4.1.1991.1.1.3.1.10 | snFdbTableStationFlush | 1 | 1 | The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in … |
| 1.3.6.1.4.1.1991.1.1.3.1.11 | snPortStpSetAll | 1 | 1 | The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-… |
| 1.3.6.1.4.1.1991.1.1.3.1.12 | snSwProbePortNum | 1 | 1 | A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to… |
| 1.3.6.1.4.1.1991.1.1.3.1.13 | snSw8021qTagMode | 1 | 1 | The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabl… |
| 1.3.6.1.4.1.1991.1.1.3.1.14 | snSwGlobalStpMode | 1 | 1 | Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enable… |
| 1.3.6.1.4.1.1991.1.1.3.1.15 | snSwIpMcastQuerierMode | 1 | 1 | The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)........… |
| 1.3.6.1.4.1.1991.1.1.3.1.17 | snSwViolatorPortNumber | 1 | 1 | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The … |
| 1.3.6.1.4.1.1991.1.1.3.1.18 | snSwViolatorMacAddress | 1 | 1 | The source address of the violator packet received by the switch or router. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.19 | snVLanGroupVlanMaxEntry | 1 | 1 | The maximum number of VLAN entries are allowed to configure. |
| 1.3.6.1.4.1.1991.1.1.3.1.20 | snSwEosBufferSize | 1 | 1 | A specific buffer size for all the different EOS buffers. |
| 1.3.6.1.4.1.1991.1.1.3.1.21 | snVLanByPortEntrySize | 1 | 1 | The size of each VLAN table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.22 | snSwPortEntrySize | 1 | 1 | The size of each port table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.23 | snFdbStationEntrySize | 1 | 1 | The size of each Fdb station table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.24 | snPortStpEntrySize | 1 | 1 | The size of each port stp table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.25 | snSwEnableBridgeNewRootTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate bridge new root traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.26 | snSwEnableBridgeTopoChangeTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate bridge topology change traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.27 | snSwEnableLockedAddrViolationTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate locked address violation traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.28 | snSwIpxL3SwMode | 1 | 1 | The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enable… |
| 1.3.6.1.4.1.1991.1.1.3.1.29 | snVLanByIpSubnetMaxSubnets | 1 | 1 | The maximum number of subnets for each IP VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.30 | snVLanByIpxNetMaxNetworks | 1 | 1 | The maximum number of networks for each IPX VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.31 | snSwProtocolVLanMode | 1 | 1 | disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 V… |
| 1.3.6.1.4.1.1991.1.1.3.1.32 | snMacStationVLanId | 1 | 1 | This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table. (dot1dTpFdbTable). Since the d… |
| 1.3.6.1.4.1.1991.1.1.3.1.33 | snSwClearCounters | 1 | 1 | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the foll… |
| 1.3.6.1.4.1.1991.1.1.3.1.34 | snSw8021qTagType | 1 | 1 | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/… |
| 1.3.6.1.4.1.1991.1.1.3.1.35 | snSwBroadcastLimit | 1 | 1 | Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets p… |
| 1.3.6.1.4.1.1991.1.1.3.1.36 | snSwMaxMacFilterPerSystem | 1 | 1 | The maximum number of MAC Filters per system in the MAC Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.37 | snSwMaxMacFilterPerPort | 1 | 1 | The maximum number of MAC Filters per port in the Port MAC Access Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.38 | snSwDefaultVLanId | 1 | 1 | The VLAN ID of the DEFAULT PORT-VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.39 | snSwGlobalAutoNegotiate | 1 | 1 | This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotia… |
| 1.3.6.1.4.1.1991.1.1.3.1.40 | snSwQosMechanism | 1 | 1 | Indicates whether the qos mechanism is strict or weighted. |
| 1.3.6.1.4.1.1991.1.1.3.1.41 | snSwSingleStpMode | 1 | 1 | Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. enabl… |
| 1.3.6.1.4.1.1991.1.1.3.1.43 | snSwViolatorIfIndex | 1 | 1 | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.44 | snSwSingleStpVLanId | 1 | 1 | The VLAN ID of the Single Spanning Tree VLAN if Single Spanning Tree was enabled. This object returns zero if Single Spanning Tre… |