If Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets.
When read, snOspfVifAuthKey always returns a string of
length zero.
Parsed from file sn_ospf_group.mib.txt
Company: None
Module: FOUNDRY-SN-OSPF-GROUP-MIB
If Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets.
When read, snOspfVifAuthKey always returns a string of
length zero.
Parsed from file FOUNDRY-SN-OSPF-GROUP-MIB.mib
Module: FOUNDRY-SN-OSPF-GROUP-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-OSPF-GROUP-MIB
[Automatically extracted from oidview.com]
snOspfVirtIfStatusAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'h } ::= { snOspfVirtIfStatusEntry 11 }
snOspfVirtIfStatusAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'h } ::= { snOspfVirtIfStatusEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.1 | snOspfVirtIfStatusEntryIndex | 0 | 0 | The table entry index of this Area. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.2 | snOspfVirtIfStatusAreaID | 0 | 0 | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.3 | snOspfVirtIfStatusNeighbor | 0 | 0 | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.4 | snOspfVirtIfStatusTransitDelay | 0 | 0 | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.5 | snOspfVirtIfStatusRetransInterval | 0 | 0 | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value … |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.6 | snOspfVirtIfStatusHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same fo… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.7 | snOspfVirtIfStatusRtrDeadInterval | 0 | 0 | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This shoul… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.8 | snOspfVirtIfStatusState | 0 | 0 | The OSPF virtual interfaces states. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.9 | snOspfVirtIfStatusEvents | 0 | 0 | The number of state changes or error events on this Virtual Link. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.10 | snOspfVirtIfStatusAuthType | 0 | 0 | snOspfVirtIfStatusAuthtype |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.12 | snOspfVirtIfStatusMd5AuthKeyId | 0 | 0 | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 25… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.13 | snOspfVirtIfStatusMd5AuthKey | 0 | 0 | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent wil… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.14 | snOspfVirtIfStatusMd5ActivationWaitTime | 0 | 0 | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.15 | snOspfVirtIfStatusAreaIdFormat | 0 | 0 | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integ… |