The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for the virtual
neighbor.
Parsed from file sn_ospf_group.mib.txt
Company: None
Module: FOUNDRY-SN-OSPF-GROUP-MIB
The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for the virtual
neighbor.
Parsed from file FOUNDRY-SN-OSPF-GROUP-MIB.mib
Module: FOUNDRY-SN-OSPF-GROUP-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-OSPF-GROUP-MIB
[Automatically extracted from oidview.com]
snOspfVirtIfStatusRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor." DEFVAL { 60 } ::= { snOspfVirtIfStatusEntry 7 }
snOspfVirtIfStatusRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor." DEFVAL { 60 } ::= { snOspfVirtIfStatusEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.1 | snOspfVirtIfStatusEntryIndex | 0 | 0 | The table entry index of this Area. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.2 | snOspfVirtIfStatusAreaID | 0 | 0 | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.3 | snOspfVirtIfStatusNeighbor | 0 | 0 | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.4 | snOspfVirtIfStatusTransitDelay | 0 | 0 | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.5 | snOspfVirtIfStatusRetransInterval | 0 | 0 | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value … |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.6 | snOspfVirtIfStatusHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same fo… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.8 | snOspfVirtIfStatusState | 0 | 0 | The OSPF virtual interfaces states. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.9 | snOspfVirtIfStatusEvents | 0 | 0 | The number of state changes or error events on this Virtual Link. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.10 | snOspfVirtIfStatusAuthType | 0 | 0 | snOspfVirtIfStatusAuthtype |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.11 | snOspfVirtIfStatusAuthKey | 0 | 0 | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey alwa… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.12 | snOspfVirtIfStatusMd5AuthKeyId | 0 | 0 | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 25… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.13 | snOspfVirtIfStatusMd5AuthKey | 0 | 0 | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent wil… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.14 | snOspfVirtIfStatusMd5ActivationWaitTime | 0 | 0 | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.15 | snOspfVirtIfStatusAreaIdFormat | 0 | 0 | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integ… |