This field specifies the destinations for any traps
that match the filter criteria specified. This field allows
ip addresses, alias names (from the sm6kAlias table) or
resolvable hostnames separated by commas. If this
field is left blank, the trap will be sent to the trap
destinations specified in the sm6kTrapDestination table.
Parsed from file ibm-sysmon6k.mib.txt
Company: None
Module: SYSMON6K-MIB
This field specifies the destinations for any traps
that match the filter criteria specified. This field allows
ip addresses, alias names (from the smMlmAlias table) or
resolvable hostnames separated by commas. If this
field is left blank, the trap will be sent to the trap
destinations specified in the smMlmTrapDestination table.
Each host listed can specify a destination port number
and protocol (tcp or udp ) or service name
using the format:
x+y/z where x can be ip address or hostname or alias name
y can be port number or protocol or service name
z can be port number or protocol.
example: testhost+162/tcp or 9.67.162.81+udp/162
If the port or protocol is not specified then default
value is used. The default port number is '162' and
default protocol is 'udp'.
Parsed from file MIDLEVELMGR-MIB.mib
Module: MIDLEVELMGR-MIB
Vendor: IBM
Module: MIDLEVELMGR-MIB
[Automatically extracted from oidview.com]
sm6kFilterTrapDestinations OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field specifies the destinations for any traps that match the filter criteria specified. This field allows ip addresses, alias names (from the sm6kAlias table) or resolvable hostnames separated by commas. If this field is left blank, the trap will be sent to the trap destinations specified in the sm6kTrapDestination table." ::= { sm6kFilterEntry 16 }
smMlmFilterTrapDestinations OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field specifies the destinations for any traps that match the filter criteria specified. This field allows ip addresses, alias names (from the smMlmAlias table) or resolvable hostnames separated by commas. If this field is left blank, the trap will be sent to the trap destinations specified in the smMlmTrapDestination table. Each host listed can specify a destination port number and protocol (tcp or udp ) or service name using the format: x+y/z where x can be ip address or hostname or alias name y can be port number or protocol or service name z can be port number or protocol. example: testhost+162/tcp or 9.67.162.81+udp/162 If the port or protocol is not specified then default value is used. The default port number is '162' and default protocol is 'udp'." ::= { smMlmFilterEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.12.7.4.1.1 | smMlmFilterState, sm6kFilterState | 0 | 0 | State for the filter rule. When the state is set to invalid, the filter is deleted. When the filter entry is set to disabled, t… |
| 1.3.6.1.4.1.2.6.12.7.4.1.2 | smMlmFilterParticipationState, sm6kFilterParticipationState | 0 | 0 | This field indicates whether or not the rule is participating in the filter rule base. When the filter rule is active, it is par… |
| 1.3.6.1.4.1.2.6.12.7.4.1.3 | smMlmFilterName, sm6kFilterName | 0 | 0 | This field contains the name for a particular filter. The instance identifier associated with every field in the filter entry is … |
| 1.3.6.1.4.1.2.6.12.7.4.1.4 | smMlmFilterDescription, sm6kFilterDescription | 0 | 0 | Description of the filter. This field should contain a general description of what the filter accomplishes. A user should be ab… |
| 1.3.6.1.4.1.2.6.12.7.4.1.5 | smMlmFilterAction, sm6kFilterAction | 0 | 0 | This field is used to determine whether or not the matching trap is forwarded on to a manager station. If sendTraps is specified… |
| 1.3.6.1.4.1.2.6.12.7.4.1.6 | smMlmFilterEntryEnterpriseExpression, sm6kFilterEntryEnterpriseExpression | 0 | 0 | This field is used to match the rule against the enterpriseID contained in the received trap. The entry may be an alias name (fr… |
| 1.3.6.1.4.1.2.6.12.7.4.1.7 | smMlmFilterAgentAddrExpression, sm6kFilterAgentAddrExpression | 0 | 0 | This field is used to match against the address of the agent that generated the trap. The agent address expression is a comma se… |
| 1.3.6.1.4.1.2.6.12.7.4.1.8 | smMlmFilterGenericExpression, sm6kFilterGenericExpression | 0 | 0 | This field is used to match against the generic trap number contained in the received trap. This field allows a comma separated … |
| 1.3.6.1.4.1.2.6.12.7.4.1.9 | smMlmFilterSpecificExpression, sm6kFilterSpecificExpression | 0 | 0 | This field is used to match against the specific trap number contained in the received trap. This field allows a comma separated… |
| 1.3.6.1.4.1.2.6.12.7.4.1.10 | smMlmFilterVariableExpression, sm6kFilterVariableExpression | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.11 | smMlmFilterTotalTrapsMatched, sm6kFilterTotalTrapsMatched | 0 | 0 | This field contains the number of traps that have matched this filter. This count is reset to zero whenever the filter entry's s… |
| 1.3.6.1.4.1.2.6.12.7.4.1.12 | smMlmFilterActivationTime, sm6kFilterActivationTime | 0 | 0 | This field specifies the time to activate the filter (ie. change the participation state from inactive to active). The format sho… |
| 1.3.6.1.4.1.2.6.12.7.4.1.13 | smMlmFilterActivationDayOfWeek, sm6kFilterActivationDayOfWeek | 0 | 0 | This field specifies the days of the week to activate the filter at the time specified in the ActivationTime field (ie. change th… |
| 1.3.6.1.4.1.2.6.12.7.4.1.14 | smMlmFilterDeactivationTime, sm6kFilterDeactivationTime | 0 | 0 | This field specifies the time to deactivate the filter (ie. change the participation state from active to inactive). The format s… |
| 1.3.6.1.4.1.2.6.12.7.4.1.15 | smMlmFilterDeactivationDayOfWeek, sm6kFilterDeactivationDayOfWeek | 0 | 0 | This field specifies the days of the week to deactivate the filter at the time specified in the DeactivationTime field (ie. chang… |
| 1.3.6.1.4.1.2.6.12.7.4.1.17 | smMlmFilterMatchedCommand, sm6kFilterMatchedCommand | 0 | 0 | This field specifies the command to be executed when a received trap matches the filter. A set of environment variables are defi… |
| 1.3.6.1.4.1.2.6.12.7.4.1.18 | smMlmFilterMatchedTrapDescription, sm6kFilterMatchedTrapDescription | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.19 | smMlmFilterMatchedTrapEnterprise, sm6kFilterMatchedTrapEnterprise | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.20 | smMlmFilterMatchedSpecificTrap, sm6kFilterMatchedSpecificTrap | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.21 | smMlmFilterThrottleType, sm6kFilterThrottleType | 0 | 0 | This field is used to indicate whether the throttle sends the first N matching traps (sendFirstN) or sends after receiving N matc… |
| 1.3.6.1.4.1.2.6.12.7.4.1.22 | smMlmFilterThrottleArmTrapCount, sm6kFilterThrottleArmTrapCount | 0 | 0 | This field specifies the number of matching traps to receive before throttling is armed. This is the N referred to in the Filter… |
| 1.3.6.1.4.1.2.6.12.7.4.1.23 | smMlmFilterThrottleArmedCommand, sm6kFilterThrottleArmedCommand | 0 | 0 | This field specifies the command to execute when the ThrottleArmTrapCount number of traps have been received (ie. when the thrott… |
| 1.3.6.1.4.1.2.6.12.7.4.1.24 | smMlmFilterThrottleArmedTrapDescription, sm6kFilterThrottleArmedTrapDescription | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.25 | smMlmFilterThrottleArmedTrapEnterprise, sm6kFilterThrottleArmedTrapEnterprise | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.26 | smMlmFilterThrottleArmedSpecificTrap, sm6kFilterThrottleArmedSpecificTrap | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.27 | smMlmFilterThrottleDisarmTimer, sm6kFilterThrottleDisarmTimer | 0 | 0 | This field specifies the time period to elapse before the throttle is disarmed (reset). It is important to note that if sm6kThro… |
| 1.3.6.1.4.1.2.6.12.7.4.1.28 | smMlmFilterThrottleDisarmTrapCount, sm6kFilterThrottleDisarmTrapCount | 0 | 0 | This field specifies the delta number of traps to receive before the throttle is disarmed. This field value is a delta and only … |
| 1.3.6.1.4.1.2.6.12.7.4.1.29 | smMlmFilterThrottleDisarmedCommand, sm6kFilterThrottleDisarmedCommand | 0 | 0 | This field specifies the command to execute when the throttle is DISARMED. The throttle is disarmed when either 1) the smMlmThr… |
| 1.3.6.1.4.1.2.6.12.7.4.1.30 | smMlmFilterThrottleDisarmedTrapDescription, sm6kFilterThrottleDisarmedTrapDescription | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.31 | smMlmFilterThrottleDisarmedTrapEnterprise, sm6kFilterThrottleDisarmedTrapEnterprise | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.32 | smMlmFilterThrottleDisarmedSpecificTrap, sm6kFilterThrottleDisarmedSpecificTrap | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.33 | smMlmFilterThrottleState, sm6kFilterThrottleState | 0 | 0 | This field is not supported. |
| 1.3.6.1.4.1.2.6.12.7.4.1.34 | smMlmFilterThrottleTimeStarted, sm6kFilterThrottleTimeStarted | 0 | 0 | This field is not supported. |
| 1.3.6.1.4.1.2.6.12.7.4.1.35 | smMlmFilterThrottleTrapCount, sm6kFilterThrottleTrapCount | 0 | 0 | This field is not supported. |
| 1.3.6.1.4.1.2.6.12.7.4.1.36 | smMlmFilterMessages | 0 | 0 | Contains informational and error messages for this filter rule. |
| 1.3.6.1.4.1.2.6.12.7.4.1.37 | smMlmFilterThrottleCriteria | 0 | 0 | This field is used to indicate whether the throttle is to be applied on a per node and trap type basis (byNodeAndTrapType) or onl… |
| 1.3.6.1.4.1.2.6.12.7.4.1.38 | smMlmFilterThrottleVariables | 0 | 0 | This field is used to set additional criteria for variables of which the traps will be throttled. These variables are contained i… |